MOTIP - Carburettor cleaner

1 points to the loyalty system

Product code: 4380 Manufacturer: NL

8,30 EUR incl. VAT

Product code: 4380 Manufacturer: NL

Description

MOTIP - Carburettor cleaner

Cleaner for the interior and the exterior of carburettors and valves, without disassembly. Carburettor cleaner has high dissolving properties and leaves no residue. MoTip Carburettor Cleaner is non corrosive and has a directed jetspray.

QUALITY AND PROPERTIES

Directed jetspray
High dissolving properties
Leaves no residue
Non-corrosive
360° valve

PHYSICAL AND CHEMICAL DATA

Basis: Hydrocarbons
VOC-content: 100% w/w
Colour: transparent
Smell: characteristic
Relative density at 20°C: 0.84 g/ml
Yield: 3,00 g/sec.
Vapour pressure at 20°C: 3 - 4 bar
Storage stability:
10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
Size:
aerosol can, maximum nominal volume 500 ml

INSTRUCTION MANUEL

Before use, carefully read and observe the warning texts on the label!

Application:

Bring can to room temperature.
Operating temperature 5° to 30°C.
Shake can before use.
Switch off the engine and allow to cool down. Remove the air filter.
Spray the exterior of the carburettor until the contamination has disappeared.
Spray the visible part of the interior of the carburettor and allow to take effect.
Start the engine and let idl with very limited speed. Spray carburettor cleaner several times at the air inlet and increase the speed of the engine. Switch the engine off and install the air filter.

TIPS FOR SPRAY PAINTING

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

Parameters

Supplier	NL
Finish	500 ml / Aerosol
Weight	0,478 kg