Introduction » Parts TATRAN
Parts TATRAN
- Accessories
- Bowdens
- Carburettor
- Wheels-Brakes
- Engine-Bearings-Seals
- Fuel tank
- Front fork-Steering
- Gears-Transmission
- Frame
- Handlebars
- Seats
- Clutch
- Stand-Footrests
- Lighting
- Suction
- Exhaust muffler with knee
- Cylinder-Crankshaft
- Rear shocks
- Ignition-Electrical
Headlight adjusting screw (shorter thread), CHROME - JAWA, ČZ Note: The chrome part may carry slight scratches from storage.
Our Price 4.69 EUR
STOCK
Heat shrink - insulating thin wall heat 0.25 m
Our Price 0.18 EUR
High voltage terminal, straight - JAWA 500 OHC, ČZ 501-505 Can be used for: Jawa 500 OHC type 15/00 1952- Jawa 500 OHC type 15/01 1952- Jawa 500 OHC type 15/02 1953- ČZ 175 type 501, year 1958- ČZ 175 type 502, year 196- ČZ 175 type 505 Manet S 100 Tatran S 125 Velorex 250, 350
Our Price 1.65 EUR
Key ring - Spark plug Note.: Total length approx. 13 cm (Spark plug approx. 5 cm)
Our Price 4.76 EUR
STOCK
Light switch - JAWA, ČZ Can be used for: JAWA 250 type 10 JAWA 250 type 11 Pérák JAWA 350 type 18 Pérák JAWA Ogar 350 type 12 JAWA 250 type 559 Panelka JAWA 250 type 592 JAWA 250 type 590 Sport JAWA 350 type 360 Panelka JAWA 350 type 361 Sport JAWA 350 type 362 Californian JAWA-ČZ 125 type 351 JAWA-ČZ 150 type 352 JAWA-ČZ 125 type 355 Kývačka JAWA-ČZ 175 type 356 Kývačka JAWA 250 type 353
Our Price 7.19 EUR
Light switch cover, CHROME - JAWA, ČZ Can be used for: JAWA 250 type 10 JAWA 250 type 11 Pérák JAWA 350 type 18 Pérák JAWA Ogar 350 type 12 JAWA 250 type 559 Panelka JAWA 250 type 592 JAWA 250 type 590 Sport JAWA 350 type 360 Panelka JAWA 350 type 361 Sport JAWA 350 type 362 Californian JAWA-ČZ 125 type 351 JAWA-ČZ 150 type 352 JAWA-ČZ 125 type 355 Kývačka JAWA-ČZ 175 type 356 Kývačka JAWA 250
Our Price 7.19 EUR
Magnetic bowl 150mm The product makes it possible to store various types of metal elements during repairs. The magnet allows you to stick the bowl in a suitable place and protects the bowl and the components stored in it from falling and spilling. The magnet of the bowl is secured with rubber, which protects the paint from scratches. The bowl is made of double stamped sheet metal, chromed and
Our Price 4.32 EUR
Mirror round (M8x1,25), CHROME - UNI Note.: Can be used on right and left side. Length 250mm
Our Price 14.69 EUR
Mirror, round (M10) "type 1" - UNI Note.: Mirror diameter: 115 mm
Our Price 3.46 EUR
STOCK
Mirror, round (M10) "type 2" - UNI Note.: Mirror diameter: 120 mm
Our Price 6.10 EUR
STOCK
MOTIP - Alu zinc spray MoTip Alu Zinc Spray for zinc-plated parts and surfaces, which have been damaged by welding, sanding, drilling, transportation etc., and which have to repaired or adapted to colour shade.Also suitable as excellent corrosion protection for metal surfaces and blanc iron metals. Suitable for only a limited extend on aluminium QUALITY AND PROPERTIES Excellent corrosion
Our Price 9.35 EUR
MOTIP - Carburettor cleaner Cleaner for the interior and the exterior of carburettors and valves, without disassembly. Carburettor cleaner has high dissolving properties and leaves no residue. MoTip Carburettor Cleaner is non corrosive and has a directed jetspray. QUALITY AND PROPERTIES Directed jetspray High dissolving properties Leaves no residue Non-corrosive 360° valve PHYSICAL AND CHEMICAL
Our Price 7.09 EUR
MOTIP - Chrome effect spray High-gloss effect spray that gives flat surfaces a shiny effect. It is suitable for use on metal, wood, glass and various plastics. Limited weather and smear resistance. QUALITY AND PROPERTIES High-quality acrylic Good coverage Brilliant shine Excellent adhesion Fast drying time Good flow, flat surface Not weather or smear resistant! PHYSICAL AND CHEMICAL DATA
Our Price 11.86 EUR
MOTIP - Copper grease Spray with a high copper content to prevent wear and sticking of screwed connections which are exposed to very high temperatures. Copper spray has high thermal stability and is corrosion preventive. Copper spray is resistant to chemicals and weather influences and prevents wear and sticking. MoTip Copper Spray is resistant to temperatures of - 40°C up to + 1.100°C. For use:
Our Price 8.27 EUR
MOTIP - Engine paint, BLACK MOTIP - Engine paint can be used to coat engine blocks and other parts that have been exposed to strong vibrations and heat stress (up 110°C). The lacquer coating retains the required level of elasticity. QUALITY AND PROPERTIES Good filling power Long-lasting high gloss Elastic, resistant to change in temperature Scratch and shockproof Good protection against
Our Price 12.96 EUR
MOTIP - Engine paint, SILVER MOTIP - Engine paint can be used to coat engine blocks and other parts that have been exposed to strong vibrations and heat stress (up 110°C). The lacquer coating retains the required level of elasticity. QUALITY AND PROPERTIES Good filling power Long-lasting high gloss Elastic, resistant to change in temperature Scratch and shockproof Good protection against
Our Price 12.96 EUR
MOTIP - Foam cleaner Spray to protect textile and leather from moisture and the adhesion of dirt. As a result of the unique formula, an invisible, protecting film is formed, which is water-repellent, however, breathing and effectively prevents renewed adhesion of dirt. MoTip Impregnation Spray gives lasting protection and is user-friendly. QUALITY AND PROPERTIES Water-repellent Breathing Invisible
Our Price 9.17 EUR
MOTIP - Gasket remover Spray for the fast and easy removal of dried adhesives and seals, as well as hardened sealing material from car and machine parts. Gasket remover has high dissolving properties and is non-conductive and non-corrosive. In view of the high viscosity, gasket remover has optimum effect. MoTip Gasket Remover is user-friendly and has a directed jetspray. For use on: Metal, wood,
Our Price 6.65 EUR
MOTIP - Oil stain remover Highly effective foam cleaner which can help to easily remove stains and dirt from nearly all surfaces without leaving a residue. For use on: Car: seats, floor mats, door and roof trims, discs, rims Home: furniture, garden furniture, blinds QUALITY AND PROPERTIES Highly solvent Very effective Pleasant smell Water-based Sprayable from any angle due to a special 360° valve.
Our Price 8.27 EUR
MOTIP - Refractory paint for cylinders and exhausts, BLACK (HEAT RESISTANT) MOTIP HEAT RESISTANT Spray can be used to repair surfaces that have been exposed to very high temperatures. Suitable for use on exhaust pipes, ovens, grill etc. They can be sprayed on bare metal. No primer necessary! QUALITY AND PROPERTIES High temperature resistance to 800°C Good coverage and filling power Excellent
Our Price 11.86 EUR
MOTIP - Refractory paint for cylinders and exhausts, SILVER (HEAT RESISTANT) MOTIP HEAT RESISTANT Spray can be used to repair surfaces that have been exposed to very high temperatures. Suitable for use on exhaust pipes, ovens, grill etc. They can be sprayed on bare metal. No primer necessary! QUALITY AND PROPERTIES High temperature resistance to 800°C Good coverage and filling power Excellent
Our Price 11.17 EUR
MOTIP - Releaser of rusted parts (SHOCK OIL) Effective tool to loosen rusted parts. As a result of the fierce decrease in temperature to –30°C and the lubricating properties of shock oil, the screwed connection can be loosed. MoTip Shock Oil has excellent lubricating properties and a directed jetspray. QUALITY AND PROPERTIES Very effective Directed jetspray Briefly decreases the temperatur to
Our Price 5.41 EUR
MOTIP - Zinc repair MoTip Zinc Coating is excellent for mending and color harmonization small damage on hot-dip galvanized steel substrates. Especially suitable for protecting welds and for severe corrosive metals. Zinc coating with approximately 90% zinc dust content in the dry film.Fields of application:Doors, fittings, fences, gutters, drainpipes, guardrails, containers INSTRUCTION MANUEL
Our Price 8.27 EUR
MOTO Repair string, black + Vulcanizing fluid FERDUS MOTO Repair string 100/10-3,5 MOTO, black Repair strings are intended for quick repairs of tyre punctures. A puncture is defined as a hole in the tyre tread up to 6 mm dia. caused mostly by driving over a nail or other sharp and thin object.VELO-MOTO-AUTO Thin repair stringsDiameter: 3.5 mmLength: 100 mm Vulcanizing fluid D 100 ml - For cold
Our Price 1.65 EUR
Nut of carburetor cover (width 48mm / height 12mm) - JAWA, ČZ Note.: Diameter: 48 mm, Height: 22 mm Can be used for: Jawa 250 type 559 Panelka, since 1962 Jawa 250 type 590 Sport, since 1965 Jawa 250 type 592, since 1969 Jawa,ČZ 125 type 355 Kývačka since 1956 Jawa,ČZ 175 type 356 Kývačka since 1956 Jawa,ČZ 250 type 353 Kývačka since 1954 ČZ 125 type 453, since 196- ČZ 125 type 473, since 196- ČZ
Our Price 10.42 EUR
Nut of exhaust elbow, ZINC - ČZ 450-475 Can be used for: ČZ 125 type 453, since 196- ČZ 125 type 473, since 196- ČZ 175 type 450, since 196- ČZ 175 type 470, since 196- ČZ 250 type 455, since 196- ČZ 250 type 475, since 196- ČZ 175 type 502 scooter, ear 196- ČZ 175 type 505 Manet S 100 scooter Tatran S 125 scooter
Our Price 7.60 EUR
STOCK
Oil drain pan with spout, 6L Built-in raised rim handles provide ease of use Features unique oversized pouring spout which makes recycling easier
Our Price 4.32 EUR
Pattern steel stamp 3mm, numbers 0-9 (red set) Note: Professional punches for metal, for castings - a set of number punches.The red and blue die sets differ in the font of the numbers. The red set has wider numbers, the blue set, on the other hand, narrower, see photo. Set includes: numbers ( 0-9 )Size: 3 mmSquare: 6,4mmPunch length: 62,5mm Phosphated, hardened, nickel plated.Hardness: 59-63 HRC
Our Price 8.62 EUR
Pattern steel stamp 6mm, numbers 0-9 (red set) Note: Professional punches for metal, for castings - a set of number punches.The red and blue die sets differ in the font of the numbers. The red set has wider numbers, the blue set, on the other hand, narrower, see photo. Set includes: numbers ( 0-9 )Size: 6 mmSquare: 9.6mmPunch length: 68mm Phosphated, hardened, nickel plated.Hardness: 59-63 HRC
Our Price 10.07 EUR
PAULIN - Gasket maker (85g) -30°C to +180°C Universal high-elastic putty based on acrylonitrile rubber, which dries quickly and vulcanizes to a solid mass similar to rubber. It serves as a seal or a seal replacement. It is especially suitable for sealing gears, gearboxes, differentials, wedge boxes, water pumps, etc. Paulin Sealant resists oils, diesel, lyes, acids and coolants at temperature
Our Price 2.70 EUR
Plastic lubricant (115g) Smarol Nano - ORLEN OIL SMAROL NANO for mowers and brushcutters is designed for lubricating the angular gears of petrol brushcutters and trimmers. The lubricant is made from high quality base oil thickened with complex lithium soaps. The lubricant is enriched with anti-corrosion additives and EP. Due to the thickener used, it is characterized by a high pour point and high
Our Price 2.70 EUR
Plastic Petrol Can 5L Plastic Fuel Can with a capacity of 5 liters. Comes with easy to use flexible spout and ergonomic handle. Suitable for petrol, oil and water. Technical Data Capacity: 5 liters Colour: Red Measurements [W x D x H]: 250 x 130 x 250 mm Material: HDPE (High Density Polyethylene)
Our Price 5.03 EUR
Pliers for brake shoe springs - UNI Made specifically for mounting and dismounting brake shoe return springs. Asymmetrically shaped pliers, where one is a support and the other with a hook serves to capture the spring. On one handle there is a special head for releasing brake shoe fuses with application on practically all hydraulic brakes. They can also be used to mount/dismount springs from pins.
Our Price 8.99 EUR
PRESTO - Acrylic scratch remover Note: The set contains: 50 g scratch remover (tube), 1 polishing cloth, 2 special sand papers Acrylic and Plexiglas® objects, e.g. rear lights, windows of convertibles, caravans, windscreens, shields of helmets and covers for instruments etc., scratch very easy and, thus, lose their appearance and, thus, their value.Using the presto Acrylic Scratch Remover, these
Our Price 8.12 EUR
PRESTO - Exhaust assembly paste 170g PRESTO Exhaust Assembly Paste is a putty-like paste to seal joints in the field of exhaust systems, such as sleeves, terminals, clamps etc.For the repair of wholes, cracks etc. in exhaust system we recommend presto Exhaust Repair Paste. INSTRUCTION MANUEL Before use, carefully read and observe the warning texts on the label!
Our Price 4.14 EUR
PRESTO - Exhaust assembly paste 60g PRESTO Exhaust Assembly Paste is a putty-like paste to seal joints in the field of exhaust systems, such as sleeves, terminals, clamps etc.For the repair of wholes, cracks etc. in exhaust system we recommend presto Exhaust Repair Paste. INSTRUCTION MANUEL Before use, carefully read and observe the warning texts on the label!
Our Price 2.70 EUR
PRESTO - Invisible glove 650ml PRESTO Invisible Glove is developed to protect your hands from contamination, such as oil, lacquers and paints, mastic, glue, adhesive, polyurethane foam etc. Very suitable to protect from soiling while working in: Garages and workshops, Printer shops, Chassis construction, Paint-processing industry, Construction, miscellaneous industry etc. QUALITY AND PROPERTIES
Our Price 12.40 EUR
PRESTO - Paint scratch remover (kit) Note: The set contains: 25 g scratch remover - REPAIR (tube),25 g scratch remover - FINISH (tube) 1 polishing cloth, 2 special sand papers The DEKRA-approved presto Scratch Remover removes scratches, minor scrapes and paint traces from paintwork (also metallic) quickly and reliably.With two different special polishes, both minor and deep scratches can be
Our Price 12.94 EUR
Puncture repair kit of MOTO tyres Repair kit include: MOTO Repair string 100/10-3,5, black Repair strings are intended for quick repairs of tyre punctures. A puncture is defined as a hole in the tyre tread up to 6 mm dia. caused mostly by driving over a nail or other sharp and thin object.VELO-MOTO-AUTO Thin repair stringsDiameter: 3.5 mmLength: 100 mm Vulcanizing fluid D 100 ml - For cold
Our Price 5.45 EUR
PVC protective tube for cables 10x0,5 (price per meter) For a longer length, add more pieces to the basket. (e.g. 2 pcs = 2 m of cable in total) Inner diameter: 10mm
Our Price 0.36 EUR
STOCK
PVC protective tube for cables 15x0,5 (price per meter) For a longer length, add more pieces to the basket. (e.g. 2 pcs = 2 m of cable in total) Inner diameter: 15mm
Our Price 0.36 EUR
STOCK
PVC protective tube for cables 3x0,5 (price per meter) For a longer length, add more pieces to the basket. (e.g. 2 pcs = 2 m of cable in total) Inner diameter: 3mm
Our Price 0.36 EUR
PVC protective tube for cables 5x0,5 (price per meter) For a longer length, add more pieces to the basket. (e.g. 2 pcs = 2 m of cable in total) Inner diameter: 5mm
Our Price 0.36 EUR
STOCK
Reduction for the inflator tube from MOTO to VELO - UNI
Our Price 0.90 EUR
Reflector 60mm (round), RED (HELLA), for screw - UNI Note.: Diameter 60 mm
Our Price 1.25 EUR
STOCK
Reflector 60mm (round), RED, self-adhesive - UNI Note.: Diameter 60 mm
Our Price 1.25 EUR
Reflector with screw (51mm), WHITE - UNI
Our Price 4.33 EUR
Rubber of mirror (diameter 120mm) - UNI
Our Price 0.96 EUR
STOCK
Rubber of shift lever, knurled - JAWA 90, Libeňák, ČZ 125/150, Manet 90 Can be used for: Jawa 250 type 553,579 Libeňák Jawa 350 type 554, Libeňák Jawa 90 type 30,31 Cross, since1968 Jawa 90 type 36,37 Roadster, since 1968 ČZ 125 A year 1942-1947 ČZ 125 B year roku 1947 ČZ 125 T year 1947-1950 ČZ 125 C year 1950-1952 ČZ 150 C year 1950-1953 ČZ 150 C Rikša, year 1951- Manet 90, since 1948
Our Price 2.70 EUR
Rubber under light - JAWA 550-555, Pérák, ČZ 125/150 Lze použít pro: Jawa 250 type 10,11 Pérák, year 1946-7 Jawa 250 type 11 Pérák, year 1948-9 Jawa 250 type 11 Pérák, year 1950-4 Jawa 350 type 18 Pérák, year 1948-55 Jawa Ogar 350 type 12, year 1948 Jawa 50 type 550, since 1954 Jawa 50 type 555, since 1958 Jawa 50 type 551 Jawetta, since 1959 Jawa 50 type 551 Jawetta Sport, since 1960 Jawa 500 OHC
Our Price 1.80 EUR
Set for aluminum and other nonferrous metals, type C (100 mm) Used for polishing HARDLY oxidized aluminum and other non-ferrous metals. For each type of paste, we recommend your own disc. Do not confuse disks that are used for sanding with discs that you use to polish!!! The paste is applied to the spinning wheel and gently applying to the disc for about 4sec. The application time affects the
Our Price 23.35 EUR
Set for aluminum and other nonferrous metals, type C (130 mm) Used for polishing HARDLY oxidized aluminum and other non-ferrous metals. For each type of paste, we recommend your own disc. Do not confuse disks that are used for sanding with discs that you use to polish!!! The paste is applied to the spinning wheel and gently applying to the disc for about 4sec. The application time affects the
Our Price 24.07 EUR
Shift lever, CHROME - ČZ 125/150, JAWA-ČZ 351-352 Can be used for: JAWA-ČZ 125 type 351 since 1954 JAWA-ČZ 150 type 352 since 1954 ČZ 125 T year 1947-1950 ČZ 125 C year 1950-1952 ČZ 150 C year 1950-1953 ČZ 150 C Rikša, year 1951- Manet 90, since 1948
Our Price 39.30 EUR
Shift lever, POLISHED STAINLESS STEEL - ČZ 125/150, JAWA-ČZ 351-352 Can be used for: JAWA-ČZ 125 type 351 since 1954 JAWA-ČZ 150 type 352 since 1954 ČZ 125 T year 1947-1950 ČZ 125 C year 1950-1952 ČZ 150 C year 1950-1953 ČZ 150 C Rikša, year 1951- Manet 90, since 1948
Our Price 32.22 EUR
STOCK
Shift of fork shaft - JAWA Pérák, Kývačka (1.type) JAWA 250 type 10,11 Pérák, year 1946-7 JAWA 250 type 11 Pérák, year 1948-9 JAWA 250 type 11 Pérák, year 1950-4 JAWA 350 type 18 Pérák, year 1948-55 JAWA Ogar 350 type 12, year 1948 JAWA-ČZ 125 type 355 Kývačka since 1956 JAWA-ČZ 175 type 356 Kývačka since 1956 JAWA-ČZ 250 type 353 Kývačka since 1954 JAWA-ČZ 350 type 354 Kývačka since 1954 JAWA 250
Our Price 25.33 EUR
Sleeve of front bulb - JAWA, ČZ Can be used for: Jawa 250 type 590 Sport, since 1965 Jawa 350 type 361 Sport, since 1965 Jawa,ČZ 125 type 351 since 1954 Jawa,ČZ 150 type 352 since 1954 Jawa,ČZ 125 type 355 Kývačka since 1956 Jawa,ČZ 175 type 356 Kývačka since 1956 Jawa,ČZ 250 type 353 Kývačka since 1954 Jawa,ČZ 350 type 354 Kývačka since 1954 Jawa 250 type 553, Libeňák Jawa 350 type 554, Libeňák
Our Price 9.16 EUR
Socks for best motorbike rider (36-41), RED - Black pistons & shock-absorbers Design socks made in Czech republic. Size 36-41. Composition: 80% Cotton / 15% Polyamide / 5% Elastan
Our Price 4.50 EUR
Socks for best motorbike rider (36-41), WHITE - Black pistons & shock-absorbers Design socks made in Czech republic. Size 36-41. Composition: 80% Cotton / 15% Polyamide / 5% Elastan
Our Price 4.50 EUR
Socks for best motorbike rider (42-46), RED - Black pistons & shock-absorbers Design socks made in Czech republic. Size 42-46. Composition: 80% Cotton / 15% Polyamide / 5% Elastan
Our Price 4.50 EUR
