Introduction » Parts JAWA 50 type 05,20-23 » PRESTO - Acrylic scratch remover
PRESTO - Acrylic scratch remover
STOCK
Full specifications
PRESTO - Acrylic scratch remover
Note: The set contains: 50 g scratch remover (tube), 1 polishing cloth, 2 special sand papers
Acrylic and Plexiglas® objects, e.g. rear lights, windows of convertibles, caravans, windscreens, shields of helmets and covers for instruments etc., scratch very easy and, thus, lose their appearance and, thus, their value.
Using the presto Acrylic Scratch Remover, these scratches can be easily, quickly and reliably disposed of: New from old! Thus, an expensive repair, or even replacement, can often be prevented.
QUALITY AND PROPERTIES
- Reliably removes scratches from acrylic and Plexiglas® surfaces of the car,
motorcycle, caravan, boat, furniture etc. - Quick and easy application
- All-inclusive kit contains everything required for application
- Attains results in professional quality, also for deeper scratches
PHYSICAL AND CHEMICAL DATA
- Chemical base: Mixture of the substances listed in the safety data sheet.
- Consistency: firm
- Colour: white
- Odour: characteristic
- Density: 1,294 g/cm³
- pH-value: not determinable
- Flashpoint: 270°C
- Storage stability:
36 months in the closed original package if cool and dry storage provided (=5°-25°C, relative air humidity of max. 60%). Protect from direct sunlight, frost and humidity. - Size: PLASTIC POLISH 50g tube, 1 polishing cloth, 2 special sand papers
INSTRUCTION MANUEL
Before use, carefully read and observe the warning texts on the label!
Application:
- 1. Clean the surface and apply a little paste.
- 2. Using a soft, clean cotton cloth or pad polish the scratched areas using heavy pressure for 2-3 minutes. Do not use on any printed, varnished or coated surfaces.
- 3. For deep scratches repeat application several times.
- 4. Remove residue with a cloth.
- 5. Very deep scratches should be treated beforehand with special abrasive paper (granularity: 1500) and a little water. Polish afterwards with presto Acrylic Scratch Remover.
Warning: Do not use on any printed, varnished or coated surfaces. Do not use on Polycarbonate (PC). To be on the safe side, first test the polish on an unexposed surface.
