Introduction » Parts JAWA 50 type 05,20-23 » MOTIP - Releaser of rusted parts (SHOCK OIL)
MOTIP - Releaser of rusted parts (SHOCK OIL)
STOCK
Full specifications
MOTIP - Releaser of rusted parts (SHOCK OIL)
Effective tool to loosen rusted parts. As a result of the fierce decrease in temperature to –30°C and the lubricating properties of shock oil, the screwed connection can be loosed. MoTip Shock Oil has excellent lubricating properties and a directed jetspray.
QUALITY AND PROPERTIES
- Very effective
- Directed jetspray
- Briefly decreases the temperatur to -30°C
- Excellent lubricating properties
PHYSICAL AND CHEMICAL DATA
- Basis: Aliphatic Hydrocarbons
- VOC-content: approximately 95% w/w
- Colour: brownish-transparent
- Smell: Vanilla
- Relative density at 20°C: 0.65 g/ml
- Yield: 1.92 g/sec.
- Vapour pressure at 20°C: 3 - 4 bar
- Storage stability:
10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) - Size:
aerosol can, maximum nominal volume 500 ml
INSTRUCTION MANUEL
Before use, carefully read and observe the warning texts on the label!
Application:
- Bring can to room temperature.
- Operating temperature 5° to 30°C.
- Shake can before use.
- Spray the screws with several short sprays for several seconds.
- The fast temperature drop in combination with the lubrication means screws can be loosened.
- Do not spray on skin or body parts!
TIPS FOR SPRAY PAINTING
Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.
Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!
