Introduction » Parts JAWA 50 type 05,20-23 » MOTIP - Copper grease
MOTIP - Copper grease
STOCK
Full specifications
MOTIP - Copper grease
Spray with a high copper content to prevent wear and sticking of screwed connections which are exposed to very high temperatures. Copper spray has high thermal stability and is corrosion preventive. Copper spray is resistant to chemicals and weather influences and prevents wear and sticking. MoTip Copper Spray is resistant to temperatures of - 40°C up to + 1.100°C.
For use:
- Lubricating battery contacts, brake parts, hinges and clutches
- Stopping disc brake pads from squeaking
- Protecting battery contacts and terminals
- On spark plugs, exhaust system joints and attachments and much more
QUALITY AND PROPERTIES
- High thermal stability
- Resistant to chemicals and weather influences
- Corrision preventive
- Excellent adhesion
- Prevents wear and sticking
- Simplifies the future removal
- Directed jetspray
PHYSICAL AND CHEMICAL DATA
- Basis: EP Grease and small copper particles
- VOC-content: approx. 69% w/w
- Colour: coppery
- Smell: characteristic
- Solid content: approx. 31% w/w
- Appearance: pasty
- Relative density at 20°C: 0.767 g/ml
- Yield: 1.26 g/sec.
- Vapour pressure at 20°C: 3 - 4 bar
- Temperature resistant: -40°C to +1.100°C
- Storage stability:
10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) - Size:
aerosol can, maximum nominal volume 500 ml
INSTRUCTION MANUEL
Before use, carefully read and observe the warning texts on the label!
Application:
- Bring can to room temperature.
- Operating temperature 5° to 30°C.
- Clean the surface to be treated of moisture, dust and grease.
- Shake can for 2 minutes before use.
- Apply evenly.
- Optimum lubrication occurs once the solvent has evaporated (ca. 1 minute).
- Screws and nuts should be sprayed before being screwed.
TIPS FOR SPRAY PAINTING
Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.
Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!
