Introduction » Parts BABETTA 207, 210, 225
Spare parts BABETTA 207, 210, 225
Type 207, 210, 225
- Accessories
- Bowdens
- Carburettor
- Wheels-Brakes
- Engine-Bearings-Seals
- Fuel tank
- Front fork
- Gears-Transmission
- Frame
- Handlebars
- Seats
- Clutch
- Starter mechanism
- Lighting
- Pedal transfer
- Exhaust muffler with knee
- Cylinder-Crank mechanism
- Ignition-Electrical
Girder of stator, sensor of impulses (SK) - Babetta JAWA Babetta type 207 (1-speed.) JAWA Babetta type 210 (2-speed.) JAWA Babetta type 225
Our Price 16.00 EUR
STOCK
Girder of stator, sensor of impulses (TWN) - Babetta JAWA Babetta type 207 (1-speed.) JAWA Babetta type 210 (2-speed.) JAWA Babetta type 225
Our Price 10.63 EUR
STOCK
Grip of handlebars LEFT - (BAB 210,225) Domino
Our Price 3.05 EUR
STOCK
Grip of handlebars RIGHT - gas (BAB 210,225) Domino
Our Price 3.03 EUR
Grip rubber (black), LEFT - JAWA, ČZ Note. Internal diameter 20 mm Can be used for: ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 175 rikša type 505 ČZ ČZ 175 skutr type 501 - two cylinders ČZ ČZ 175 skutr type 502 - one exhaust ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 250 type 455 ČZ ČZ 250 type 471 - two cylinders ČZ ČZ 250 type 475 - Sport ČZ ČZ 350 type 472 - two cylinders
Our Price 2.45 EUR
Grip rubber (black), RIGHT - JAWA, ČZ Note. Internal diameter 20 mm Can be used for: ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 175 rikša type 505 ČZ ČZ 175 skutr type 501 - two cylinders ČZ ČZ 175 skutr type 502 - one exhaust ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 250 type 455 ČZ ČZ 250 type 471 - two cylinders ČZ ČZ 250 type 475 - Sport ČZ ČZ 350 type 472 - two cylinders
Our Price 2.45 EUR
Grip rubber (grey), LEFT - JAWA, ČZ Note. Internal diameter 20 mm Can be used for: ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 175 rikša type 505 ČZ ČZ 175 skutr type 501 - two cylinders ČZ ČZ 175 skutr type 502 - one exhaust ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 250 type 455 ČZ ČZ 250 type 471 - two cylinders ČZ ČZ 250 type 475 - Sport ČZ ČZ 350 type 472 - two cylinders
Our Price 2.86 EUR
Grip rubber (grey), RIGHT - JAWA, ČZ Note. Internal diameter 27 mm Can be used for: ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 175 rikša type 505 ČZ ČZ 175 skutr type 501 - two cylinders ČZ ČZ 175 skutr type 502 - one exhaust ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 250 type 455 ČZ ČZ 250 type 471 - two cylinders ČZ ČZ 250 type 475 - Sport ČZ ČZ 350 type 472 - two cylinders
Our Price 2.86 EUR
Grommet of engine (harness) - JAWA 50 Pionýr, Babetta Can be used for: JAWA 50 type 550,555 JAWA 50 type 05, 23, 21, 23 Babetta
Our Price 1.30 EUR
Guard of carburetor cable lead - Babetta
Our Price 1.04 EUR
STOCK
Guide of chain pulley - Babetta Lze použít pro: JAWA Babetta typ 207 (1-rychl.) JAWA Babetta typ 210 (2-rychl.) JAWA Babetta typ 225 (2-rychl.)
Our Price 1.47 EUR
Guiding of throttle cable (Dellorto) - Babetta
Our Price 1.47 EUR
GusSet of crank Stadion,Babetta. GusSet of starting lever Jawa 550/555,05,20-23
Our Price 0.94 EUR
Hand of speedometer, RED - JAWA 50 Pionýr, Babetta, Stadion Can be used for: Jawa 50 - Babetta 207 Jawa 50 - Babetta 210 Jawa 50 type 05, since 1962 Jawa 50 type 20, since 196- Jawa 50 type 21, since 196- Jawa 50 type 23 Mustang, since 1969 Jawa 50 type 550, since 1954 Jawa 50 type 555, since 1958 Jawa 50 type 551 Jawetta, since 1959 Jawa 50 type 551 Jawetta Sport, since 1960 Jawa 90 type 30,31
Our Price 3.80 EUR
Hand of speedometer, WHITE - JAWA 50 Pionýr, Babetta, Stadion Can be used for: Jawa 50 - Babetta 207 Jawa 50 - Babetta 210 Jawa 50 type 05, since 1962 Jawa 50 type 20, since 196- Jawa 50 type 21, since 196- Jawa 50 type 23 Mustang, since 1969 Jawa 50 type 550, since 1954 Jawa 50 type 555, since 1958 Jawa 50 type 551 Jawetta, since 1959 Jawa 50 type 551 Jawetta Sport, since 1960 Jawa 90 type 30,31
Our Price 3.80 EUR
Hand pump with manometer 38x530mm Product Features Integrated 2" easy-to-read gauge Oversized handle provides a comfortable grip Dual head fits both Schrader and Presta valves Very tough aluminium barrel Inflates up to 160 psi / 11 bar Wide plastic base with gripper plates Technical Data Recommended Pressure: 0 - 8 bar Height: 530 mm Hose Length: 630 mm
Our Price 14.20 EUR
Handle of throttle, SLIDER - JAWA, ČZ Can be used for: Jawa 250 type 10,11 Pérák, year 1946-7 Jawa 250 type 11 Pérák, year 1948-9 Jawa 250 type 11 Pérák, year 1950-4 Jawa 350 type 18 Pérák, year 1948-55 Jawa Ogar 350 type 12, year 1948 Jawa 250 type 559 Panelka, since 1962 Jawa 250 type 592, since 1969 Jawa 350 type 360 Panelka, since 1964 Jawa,ČZ 125 type 351 since 1954 Jawa,ČZ 150 type 352 since
Our Price 16.17 EUR
Handlebar - Babetta 228, 206, 207 Can be used for: Babetta type 228 Babetta type 206 Babetta type 207
Our Price 71.51 EUR
Handlebar plug, LEFT (polished) - JAWA, ČZ
Our Price 2.90 EUR
Handlebar plug, RIGHT (unpolished) - JAWA, ČZ Note: Some plugs may be marked P or R.
Our Price 1.60 EUR
Handlebar plug, RIGHT (polished) - JAWA, ČZ Note: Some plugs may be marked P or R.
Our Price 2.90 EUR
Handlebar plug, RIGHT (unpolished) - JAWA, ČZ Note: Some plugs may be marked P or R.
Our Price 1.62 EUR
Handlebar with crossbar, CHROME (CZ) - Babetta Note: Bar diameter 14mm
Our Price 30.41 EUR
STOCK
Handlebar with holder, CHROME (CZ) - Babetta Can be used for: Babetta type 207 Babetta type 210 Babetta type 225
Our Price 32.33 EUR
Headlamp cover (SK) - Babetta 207 Note: This is a replica. Can be used for: Babetta 207
Our Price 21.92 EUR
Headlamp cover - Babetta 207 Note: This is a replica. Can be used for: Babetta 207
Our Price 3.12 EUR
Headlamp frame (SK) - Babetta 210, 225, Manet Korádo Can be used for: Babetta 210 Babetta 225 Manet Korádo
Our Price 35.40 EUR
Headlamp front, round (replacement) - Babetta 210 Note.: Must be used bulb 6V 15/15W (product no.: 6328) JAWA Babetta typ 210 (2-speed)
Our Price 28.20 EUR
Parabola předního světla - Babetta 207 Can be used for: Babetta 207
Our Price 43.11 EUR
Headlamp parabola (SK) - Babetta 210, 225, Manet Korádo Can be used for: Babetta 210 Babetta 225 Manet Korádo
Our Price 38.27 EUR
Headlight grommet, big - Babetta 207 Can be used for: Babetta type 207
Our Price 1.44 EUR
Headlight grommet, small - Babetta 207 Can be used for: Babetta type 207
Our Price 0.90 EUR
Heat shrink - insulating thin wall heat 0.25 m
Our Price 0.18 EUR
Heavy jaws puller - Babetta 210, 225, Stella Note: Service tool for pulling out heavy jaws. Can be used for: Babetta type 210 Babetta type 225 Stella M134
Our Price 3.60 EUR
Holder for attaching coil - Babetta Note.: to welding Can be used for: Babetta
Our Price 2.70 EUR
Holder for attaching frame cover and fender - Babetta Note.: to welding Can be used for: Babetta
Our Price 3.42 EUR
Holder for attaching frame cover, short - Babetta Note.: to welding Can be used for: Babetta
Our Price 1.44 EUR
Holder of pulley holder - Babetta Note.: to welding Can be used for: Babetta
Our Price 1.98 EUR
Holder of rear light - Babetta 210 Can be used for: JAWA Babetta type 210 (2-speed.)
Our Price 7.95 EUR
STOCK
Holder of rear mudguard - Babetta 207 Can be used for: Babetta type 207
Our Price 5.03 EUR
Holder of speedometer - Pio, Bab., Stad.
Our Price 3.03 EUR
Holders of blinkers L+R, FRONT - Babetta JAWA Babetta type 207 (1-speed.) JAWA Babetta type 210 (2-speed.) JAWA Babetta type 225 (2-speed.)
Our Price 3.06 EUR
Housing of chain pulley - Babetta Lze použít pro: JAWA Babetta typ 207 (1-rychl.) JAWA Babetta typ 210 (2-rychl.) JAWA Babetta typ 225 (2-rychl.)
Our Price 0.96 EUR
Ignition coil 6V 20 + 10W, BIG - Babetta Can be used for: Babetta
Our Price 7.56 EUR
STOCK
Ignition coil Babetta standard,GYT (LITTLE)
Not in stock
Not in stock
Ignition coil Babetta standard (LITTLE)
Our Price 7.55 EUR
Induction coil 4V, with sleeve JAWA Babetta type 207 (1-speed.) JAWA Babetta type 210 (2-speed.)
Our Price 26.00 EUR
Induction coil 4V, without sleeve JAWA Babetta type 207 (1-speed.) JAWA Babetta type 210 (2-speed.)
Our Price 15.09 EUR
Inner tube 2.25 - 16" (MITAS) Note: Tube suitable for tire size 2.25 - 16" (straight valve) Can be used for: Babetta The history of the Mitas brand dates back to the 1930s, when tires were first produced in Prague, Zlín and later in Otrokovice. In 2016, Mitas became part of the Trelleborg group. Currently, Mitas tyres are manufactured in plants located in three European countries, in Sri Lanka
Our Price 5.75 EUR
STOCK
Inner tube 2.25 / 2.50 - 16" Note: Tube suitable for tire size 2.25 / 2.50 - 16" (straight valve) valve TR-4 Can be used for: Babetta JAWA 50 Pionýr
Our Price 4.32 EUR
Inner tube 2.50 / 2.75 - 10" (KABAT), straight valve Note: Tube suitable for tire size 2.50 / 2.75 - 10" (straight valve) KABAT TYRE, with a tradition since 1983, is a leading European tyre manufacturer and one of the leading tire manufacturers in the world. It exports its products to 80 countries on five continents.
Our Price 9.90 EUR
Inner tube 2.75 / 3.00 - 10", bent valve - Stella Note: Tube suitable for tire size 2.75 / 3.00 - 10" (bent valve) Valve: V1-08-01
Our Price 3.96 EUR
Inner tube 3.00 / 3.50 - 10" (KABAT), bent valve Note: Tube suitable for tire size 3.00 / 3.50 - 10" (bent valve) KABAT TYRE, with a tradition since 1983, is a leading European tyre manufacturer and one of the leading tire manufacturers in the world. It exports its products to 80 countries on five continents.
Our Price 9.17 EUR
