Introduction » Parts SIMSON
Spare parts SIMSON
Type S50, S51 Enduro/Elektronik, S70
- MZA parts
- Recommended sets
- Accessories
- Bowdens & Rods
- Carburettor
- Cylinder-Crank mechanism
- Wheels-Brakes
- Engine-Bearings-Seals
- Fuel tank
- Front fork-Steering
- Gears / Shifting
- Frame-Stand-Footrests
- Handlebars
- Seats
- Clutch
- Lighting
- Exhaust muffler with knee
- Rear shocks
- Stickers
- Suction
- Ignition-Electrical
MOTIP - Copper grease Spray with a high copper content to prevent wear and sticking of screwed connections which are exposed to very high temperatures. Copper spray has high thermal stability and is corrosion preventive. Copper spray is resistant to chemicals and weather influences and prevents wear and sticking. MoTip Copper Spray is resistant to temperatures of - 40°C up to + 1.100°C. For use:
Our Price 8.27 EUR
MOTIP - Engine paint, BLACK MOTIP - Engine paint can be used to coat engine blocks and other parts that have been exposed to strong vibrations and heat stress (up 110°C). The lacquer coating retains the required level of elasticity. QUALITY AND PROPERTIES Good filling power Long-lasting high gloss Elastic, resistant to change in temperature Scratch and shockproof Good protection against
Our Price 12.96 EUR
MOTIP - Engine paint, SILVER MOTIP - Engine paint can be used to coat engine blocks and other parts that have been exposed to strong vibrations and heat stress (up 110°C). The lacquer coating retains the required level of elasticity. QUALITY AND PROPERTIES Good filling power Long-lasting high gloss Elastic, resistant to change in temperature Scratch and shockproof Good protection against
Our Price 12.96 EUR
MOTIP - Foam cleaner Spray to protect textile and leather from moisture and the adhesion of dirt. As a result of the unique formula, an invisible, protecting film is formed, which is water-repellent, however, breathing and effectively prevents renewed adhesion of dirt. MoTip Impregnation Spray gives lasting protection and is user-friendly. QUALITY AND PROPERTIES Water-repellent Breathing Invisible
Our Price 9.17 EUR
MOTIP - Gasket remover Spray for the fast and easy removal of dried adhesives and seals, as well as hardened sealing material from car and machine parts. Gasket remover has high dissolving properties and is non-conductive and non-corrosive. In view of the high viscosity, gasket remover has optimum effect. MoTip Gasket Remover is user-friendly and has a directed jetspray. For use on: Metal, wood,
Our Price 6.65 EUR
STOCK
MOTIP - Oil stain remover Highly effective foam cleaner which can help to easily remove stains and dirt from nearly all surfaces without leaving a residue. For use on: Car: seats, floor mats, door and roof trims, discs, rims Home: furniture, garden furniture, blinds QUALITY AND PROPERTIES Highly solvent Very effective Pleasant smell Water-based Sprayable from any angle due to a special 360° valve.
Our Price 8.27 EUR
STOCK
MOTIP - Refractory paint for cylinders and exhausts, BLACK (HEAT RESISTANT) MOTIP HEAT RESISTANT Spray can be used to repair surfaces that have been exposed to very high temperatures. Suitable for use on exhaust pipes, ovens, grill etc. They can be sprayed on bare metal. No primer necessary! QUALITY AND PROPERTIES High temperature resistance to 800°C Good coverage and filling power Excellent
Our Price 11.86 EUR
MOTIP - Refractory paint for cylinders and exhausts, SILVER (HEAT RESISTANT) MOTIP HEAT RESISTANT Spray can be used to repair surfaces that have been exposed to very high temperatures. Suitable for use on exhaust pipes, ovens, grill etc. They can be sprayed on bare metal. No primer necessary! QUALITY AND PROPERTIES High temperature resistance to 800°C Good coverage and filling power Excellent
Our Price 11.17 EUR
MOTIP - Releaser of rusted parts (SHOCK OIL) Effective tool to loosen rusted parts. As a result of the fierce decrease in temperature to –30°C and the lubricating properties of shock oil, the screwed connection can be loosed. MoTip Shock Oil has excellent lubricating properties and a directed jetspray. QUALITY AND PROPERTIES Very effective Directed jetspray Briefly decreases the temperatur to
Our Price 5.41 EUR
MOTIP - Zinc repair MoTip Zinc Coating is excellent for mending and color harmonization small damage on hot-dip galvanized steel substrates. Especially suitable for protecting welds and for severe corrosive metals. Zinc coating with approximately 90% zinc dust content in the dry film.Fields of application:Doors, fittings, fences, gutters, drainpipes, guardrails, containers INSTRUCTION MANUEL
Our Price 8.27 EUR
MOTO Repair string, black + Vulcanizing fluid FERDUS MOTO Repair string 100/10-3,5 MOTO, black Repair strings are intended for quick repairs of tyre punctures. A puncture is defined as a hole in the tyre tread up to 6 mm dia. caused mostly by driving over a nail or other sharp and thin object.VELO-MOTO-AUTO Thin repair stringsDiameter: 3.5 mmLength: 100 mm Vulcanizing fluid D 100 ml - For cold
Our Price 1.65 EUR
Motorcycle carpet with rubber mat (200x103cm) BLACK (MZA) - Simson Carpet mat suitable not only for the workshop, but also for the living room or showroom. color: black with white Simson motifs dimensions: approx. 200x103 cm high quality workmanship bottom made of strong 100% PVC that does not let liquids through front made of 100% polyester (absorbent surface) The product of the MZA, which is
Our Price 50.13 EUR
Neckerchief (multifunctional scarf), BLUE (MZA) - Simson Note: Multifunctional neck scarf (blue) with SIMSON logo print. Material: 100% polyester (microfiber), quick-fastening, stretchable Washable at 40 ° C The size of the tunnel after sewing is approx. 24.5 x 49 cm Unisex The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 9.08 EUR
Needle Bearing hold the strap piece of connecting rod Značka type Simson Simson S 51 type Electronic ( 50,60,70) Simson Simson S 51 type Enduro ( 50,60,70) Simson Simson SR - skutr ( 50,60,70 )
Our Price 0.18 EUR
Needle for carburetor BVF 16N3, complete - Simson Note: BVF 16N3 carburetor repair kit. This is an original spare part. The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 4.67 EUR
Needle jet (215), for carburetor BVF 16N1 (TWN) - Simson Note: BVF 16N1 carburetor needle housing
Our Price 1.82 EUR
Needle of carburetor (MZA / BING) - Simson, Manet Korádo Note: Needle is designed for the BING carburetor. This is an original spare part. Can be used for: Simson S53, S83, SC-050, SD 50, Sperber-BR, SR50, SR80, TS050, MS50, Manet korádo Carburetors BING for motorcycles ... BING produces carburettors for motorcycles from 50 to more than 1000 ccm for over 70 years. Experienced engineers optimize
Our Price 7.73 EUR
Needle of carburetor AMAL (A) - Simson Note: Needle types for AMAL carburetor A = S1 for very lean mixtureA0 = E1 for normal mixtureA1 = E for a leaner mixtureA2 = E2 for rich mixture
Our Price 3.46 EUR
Needle of carburetor AMAL (A0) - Simson Note: Needle types for AMAL carburetor A = S1 for very lean mixtureA0 = E1 for normal mixtureA1 = E for a leaner mixtureA2 = E2 for rich mixture
Our Price 5.57 EUR
Needle of carburetor AMAL (A1) - Simson Note: Needle types for AMAL carburetor A = S1 for very lean mixtureA0 = E1 for normal mixtureA1 = E for a leaner mixtureA2 = E2 for rich mixture
Our Price 3.46 EUR
Needle of carburetor AMAL (A2) - Simson Note: Needle types for AMAL carburetor A = S1 for very lean mixtureA0 = E1 for normal mixtureA1 = E for a leaner mixtureA2 = E2 for rich mixture
Our Price 3.46 EUR
Needle of carburetor BVF 16N1-11 (MZA) - Simson Note: Needle for carburettors type BVF 16N1-11. This is an original spare part.
Our Price 2.51 EUR
Needle of carburetor BVF 16N1-8 /09/ (MZA) - Simson Note: Needle for carburettors type BVF 16N1-8. This is an original spare part.
Our Price 2.34 EUR
Needle valve (BVF) - Simson, MZ Can be used for: Simson S50, S51, S53, S70, S83, SR50, SR80, KR51/2 MZ ETZ 125, 150 MZ ES 175/2, 250/2 MZ TS 125, 150
Our Price 4.14 EUR
STOCK
Nut M6, raised (MZA) - Simson Note: height 10 mm. Can be used for: Simson
Our Price 0.72 EUR
STOCK
Nut of exhaust knee (union nut), ZINC (MZA) - Simson Can be used: Simson S50, S51, S53, S70, SR50, Schwalbe The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 6.11 EUR
Nut of front fork with teflon, UPPER (MZA) - Simson Note: Dimension M24x1,5. Teflon liner prevents loosening. Can be used for: Simson S50, S51, S53, S70, S83, SR50 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 8.12 EUR
Nut of front fork, UPPER (MZA) - Simson Note: Dimension M24x1,5. Can be used for: Simson S50, S51, S53, S70, S83, SR50 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 5.10 EUR
Nut of shift (MZA) - Simson Can be used for: Simson S51, S53, S70, S83, SR50, SR80, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 3.79 EUR
O-ring 18x2 of oil plug - Simson NBR (Perbunan®, Europrene N®, Krynac®) - Nitrile rubber (oil resistant rubber, for standardized sealing technique) An O-ring is a rubber seal that is designed to prevent unwanted gas or liquid leakage or leakage. The sealing ability is not only dependent on the O-ring, but also on the installation space.
Our Price 0.18 EUR
Oil drain pan with spout, 6L Built-in raised rim handles provide ease of use Features unique oversized pouring spout which makes recycling easier
Our Price 4.32 EUR
Oil drain plug with magnet M14x1,5 (MZA) - Simson Can be used for: Simson The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 5.39 EUR
Oil plug, BLACK (MZA) - Simson Can be used for: Simson The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 1.44 EUR
Oil plug, RED (MZA) - Simson Can be used for: Simson S51, S53, S70, S83, SC-050, SD 50, Sperber-BR, SR50, SR80, TS050, KR51/2, MS50 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 0.90 EUR
Parking light bulb holder 8709.22-2 - T4W (MZA) - Simson Can be used for: Simson S51, S53, S70, SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 5.03 EUR
Pattern steel stamp 3mm, numbers 0-9 (red set) Note: Professional punches for metal, for castings - a set of number punches.The red and blue die sets differ in the font of the numbers. The red set has wider numbers, the blue set, on the other hand, narrower, see photo. Set includes: numbers ( 0-9 )Size: 3 mmSquare: 6,4mmPunch length: 62,5mm Phosphated, hardened, nickel plated.Hardness: 59-63 HRC
Our Price 8.62 EUR
Pattern steel stamp 6mm, numbers 0-9 (red set) Note: Professional punches for metal, for castings - a set of number punches.The red and blue die sets differ in the font of the numbers. The red set has wider numbers, the blue set, on the other hand, narrower, see photo. Set includes: numbers ( 0-9 )Size: 6 mmSquare: 9.6mmPunch length: 68mm Phosphated, hardened, nickel plated.Hardness: 59-63 HRC
Our Price 10.07 EUR
PAULIN - Gasket maker (85g) -30°C to +180°C Universal high-elastic putty based on acrylonitrile rubber, which dries quickly and vulcanizes to a solid mass similar to rubber. It serves as a seal or a seal replacement. It is especially suitable for sealing gears, gearboxes, differentials, wedge boxes, water pumps, etc. Paulin Sealant resists oils, diesel, lyes, acids and coolants at temperature
Our Price 2.70 EUR
Pinion drive of speedometer - Simson S50 Simson Simson S50
Our Price 4.32 EUR
STOCK
Piston 38,25 (pin 12) - Simson S51 Note: Piston pin hole 12 mm , groove 2,0 mm Can be used for: Simson S51, S53, SR50, Schwalbe KR51/2
Our Price 8.28 EUR
Piston 38,75 (pin 12) - Simson S51 Note: Piston pin hole 12 mm , groove 2,0 mm Can be used for: Simson S51, S53, SR50, Schwalbe KR51/2
Our Price 8.28 EUR
Piston 39,00 (pin 12) - Simson S51 Note: Piston pin hole 12 mm , groove 2,0 mm Can be used for: Simson S51, S53, SR50, Schwalbe KR51/2
Our Price 8.28 EUR
Piston 39,25 (pin 12) - Simson S51 Note: Piston pin hole 12 mm , groove 2,0 mm Can be used for: Simson S51, S53, SR50, Schwalbe KR51/2
Our Price 7.09 EUR
Piston 39,50 (pin 12) - Simson S51 Note: Piston pin hole 12 mm , groove 2,0 mm Can be used for: Simson S51, S53, SR50, Schwalbe KR51/2
Our Price 7.09 EUR
Piston 39,75 (pin 12) - Simson S51 Note: Piston pin hole 12 mm , groove 2,0 mm Can be used for: Simson S51, S53, SR50, Schwalbe KR51/2
Our Price 8.28 EUR
Piston 40,00 (pin 12) - Simson S50 Note: Piston pin hole 12 mm , groove 2,0 mm Can be used for: Simson S50, Star, Schwalbe
Our Price 6.31 EUR
Piston 40,00 (pin 12) - Simson S51 Note: Piston pin hole 12 mm , groove 2,0 mm Can be used for: Simson S51, S53, SR50, Schwalbe KR51/2
Our Price 12.60 EUR
Piston 40,25 (pin 12) - Simson S51 Note: Piston pin hole 12 mm , groove 2,0 mm Can be used for: Simson S51, S53, SR50, Schwalbe KR51/2
Our Price 7.95 EUR
Piston 40,50 (pin 12) - Simson S50 Note: Piston pin hole 12 mm , groove 2,0 mm Can be used for: Simson S50, Star, Schwalbe
Our Price 6.31 EUR
Piston 40,50 (pin 12) - Simson S51 Note: Piston pin hole 12 mm , groove 2,0 mm Can be used for: Simson S51, S53, SR50, Schwalbe KR51/2
Our Price 7.95 EUR
Piston 40,75 (pin 12) - Simson S50 Note: Piston pin hole 12 mm , groove 2,0 mm Can be used for: Simson S50, Star, Schwalbe
Our Price 6.31 EUR
Piston 40,75 (pin 12) - Simson S51 Note: Piston pin hole 12 mm , groove 2,0 mm Can be used for: Simson S51, S53, SR50, Schwalbe KR51/2
Our Price 9.54 EUR
Piston 41,00 (pin 12) - Simson S60 Note: Piston pin hole 12 mm , groove 2,0 mm Can be used for: Simson S51, S53, SR50, Schwalbe KR51/2 (cylinder 60ccm)
Our Price 13.11 EUR
Piston 41,00 (pin 12), (ALMOT) - Simson S60 Note: Piston pin hole 12 mm, groove 2,0 mm Can be used for: Simson S51, S53, SR50, Schwalbe KR51/2 (cylinder 60ccm) ALMOT is a manufacturer of high quality cylinders, heads and pistons for motorcycles with 30 years of experience on the market.
Our Price 10.28 EUR
Piston 41,25 (pin 12) - Simson S50 Note: Piston pin hole 12 mm , groove 2,0 mm Can be used for: Simson S50, Star, Schwalbe
Our Price 6.31 EUR
Piston 41,25 (pin 12) - Simson S60 Note: Piston pin hole 12 mm , groove 2,0 mm Can be used for: Simson S51, S53, SR50, Schwalbe KR51/2 (cylinder 60ccm)
Our Price 7.95 EUR
Piston 41,50 (pin 12) - Simson S50 Note: Piston pin hole 12 mm , groove 2,0 mm Can be used for: Simson S50, Star, Schwalbe
Our Price 6.31 EUR
Piston 41,50 (pin 12) - Simson S60 Note: Piston pin hole 12 mm , groove 2,0 mm Can be used for: Simson S51, S53, SR50, Schwalbe KR51/2 (cylinder 60ccm)
Our Price 7.95 EUR
Piston 41,75 (pin 12) - Simson S60 Note: Piston pin hole 12 mm , groove 2,0 mm Can be used for: Simson S51, S53, SR50, Schwalbe KR51/2 (cylinder 60ccm)
Our Price 9.54 EUR
Piston 45,00 (pin 12) - Simson S70 Note: Piston pin hole 12 mm, groove 2,0 mm Can be used for: Simson S70, S83, SR80 (cylinder 70ccm)
Our Price 11.34 EUR
Piston 45,00 (pin 12), (ALMOT) - Simson S70 Note.: For piston tenon 12,0mm, size for grooves 2,00 mm Can be used for: Simson S70, S83, SR80 (cylinder 70ccm) ALMOT is a manufacturer of high quality cylinders, heads and pistons for motorcycles with 30 years of experience on the market.
Our Price 10.45 EUR
Piston 45,25 (pin 12) - Simson S70 Note: Piston pin hole 12 mm, groove 2,0 mm Can be used for: Simson S70, S83, SR80 (cylinder 70ccm)
Our Price 11.31 EUR
Piston 45,75 (pin 12) - Simson S70 Note: Piston pin hole 12 mm, groove 2,0 mm Can be used for: Simson S70, S83, SR80 (cylinder 70ccm)
Our Price 11.31 EUR
