Introduction » Parts SIMSON
Spare parts SIMSON
Type S50, S51 Enduro/Elektronik, S70
- Accessories
- Bowdens & Rods
- Carburettor
- Cylinder-Crank mechanism
- Wheels-Brakes
- Engine-Bearings-Seals
- Fuel tank
- Front fork-Steering
- Gears / Shifting
- Frame-Stand-Footrests
- Handlebars
- Seats
- Clutch
- Lighting
- Exhaust muffler with knee
- Rear shocks
- Suction
- Ignition-Electrical
Clutch carrier (QMP) - Simson Can be used for: Simson S50, S51, S53, S70, S83, SR50, SR80, SD50, KR51/2, Sperber
Our Price 15.99 EUR
Clutch control lever (MZA) - Simson Note: The clutch lever is located in the engine. This is an original spare part. Can be used: Simson S51, S53, S70, S83, SR50, SR80, SD50, KR51, Sperber The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 21.02 EUR
Clutch cover gasket (MZA) - Simson Note.: Thickness 0,7 mm Can be used: Simson S51, S53, S70, S83, SR50, SR80, SD50, KR51/2, Sperber The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 1.98 EUR
Clutch cover gasket (MZA) - Simson Can be used: Simson S51, S53, S70, S83, SR50, SR80, SD50, KR51/2, Sperber The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 2.16 EUR
Clutch drive pinion 20t. (MZA) - Simson S51, S53 Note: Clutch drive pinion is intended for revcounter drive. Designed for 50cc engine and for clutch basket with 65 teeth. Can be used: Simson S51, S53 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 11.32 EUR
Clutch drive pinion 21t. (MZA) - Simson S70, S83 Note: Clutch drive pinion is intended for revcounter drive. Designed for 70ccc engine and for clutch basket with 62 teeth. Can be used: Simson S70, S83 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 18.33 EUR
Clutch plate, sheet metal 0,6 mm (MZA) - Simson S51, S70, SR50, KR51/2 Note.: 0,6 mm thick clutch plate. Standard clutch with 4 clutch plates - 3 clutch plates (sheet metal) Tuning coupling with 5 clutch plates - 4 clutch plates (sheet metal) Can be used: Simson S51, S53, S70, S83, SR50, SR80, KR51/2, Sperber The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 6.14 EUR
Clutch plate, sheet metal 1,0 mm (MZA) - Simson S51, S70, SR50, KR51/2 Note.: 1,0 mm thick clutch plate. Standard clutch with 4 clutch plates - 3 clutch plates (sheet metal) Tuning coupling with 5 clutch plates - 4 clutch plates (sheet metal) Can be used: Simson S51, S53, S70, S83, SR50, SR80, KR51/2, Sperber The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 4.15 EUR
Clutch plates 4pcs (MZA) - Simson Note.: Set includes 4 pcs of clutch plates A12. Can be used: Simson S50, S51, S70, S53, S83, SR50/80, KR51 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 7.00 EUR
Clutch plates 4pcs (TWN) - Simson Note.: Set includes 4 pcs of clutch plates A12. Can be used: Simson S50, S51, S70, S53, S83, SR50/80, KR51
Our Price 5.27 EUR
Clutch rod, long (MZA) - Simson S50, KR51/1, SR4-2/3/4, Duo 4/1 Note: This is an original spare part. Can be used for: Simson S50, KR51/1, SR4-2/3/4, Duo 4/1 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 7.78 EUR
Clutch rod, long (MZA) - Simson S51, S53, S70, SR50, KR51/2 Note: This is an original spare part. Can be used for: Simson S51, S53, S70, SR50, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 5.95 EUR
Clutch rods, set (MZA) - Simson S51, S53, S70, S83, SR50, SR80 Can be used for: Simson S51, S53, S70, S83, SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 14.56 EUR
Clutch shaft (MZA) - Simson Note.: The clutch shaft is designed for Simson motorcycles with 3 and 4 speed gearboxes. This is an original spare part. Can be used: Simson S51, S53, S70, S83, SR50, SR80, SD50, KR51/2, Sperber The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 32.04 EUR
Clutch, complete (MZA) - Simson S51, S53, S70, SR50, KR51/2 Note: The clutch is pre-assembled with a 1.6 m clutch disc spring and is ready for installation. The clutch kit is designed for the clutch shaft for M531, M541 and M741 engines. This is an original spare part. Can be used for: Simson S51, S53, S70, SR50, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 99.90 EUR
Connecting rod bearing 12x16x13, upper (MZA) - Simson Can be used for: Simson S50, S51, S53, S70, S83, SR50, SR80, SD50, KR51, Sperber The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 3.42 EUR
Connecting rod bearing 18x24x13, lower (MZA) - Simson Can be used for: Simson S50, S51, S53, S70, S83, SR50, SR80, SD50, KR51, Sperber The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 3.12 EUR
Connecting rod pin, lower (MZA) - Simson Can be used for: Simson S51, S53, S70, S83, SR50, SR80, SD50, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 4.93 EUR
Connecting rod, Set (MZA) - Simson Note: Connecting rod is suitable for cylinders 50-70ccm. The set includes, connecting rod, 2pcs of needle bearings and piston pin. Can be used for: Simson S51, S53, S70, S83, SR50, SR80, SD50, Sperber The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 76.35 EUR
Connecting rod, Set (MZA) - Simson S50, KR 51/1 Can be used for: Simson S50, KR 51/1, SR4-3, SR4-4 kpl. The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 26.95 EUR
Contactless ignition 12V CDI (TWN) - Simson S51, S53, S70, S83, SR50, SR80 Note.: Wiring diagram is only available in German language. The set includes: Contactless stator (equivalent to VAPE A70S-3) Rotor (equivalent to VAPE A70R-3C) Holder with ignition module (equivalent to VAPE Z71) AC-DC regulator (equivalent to VAPE R54) Color circuit diagram for S51 and SR50 Can be used for: Simson S51,
Our Price 143.80 EUR
STOCK
Set of contactless ignition 12V VAPE, TUNING (MZA), complete - Simson S50, S51, S70 Note: This is the contactless ignition VAPE A70S3 12V-system with 100W and 16000 rpm. The package includes installation instructions with pictures and connection diagram.This is an original spare part. Instructions are only available in German language. This product is not eligible for a registered discount. The
Our Price 307.05 EUR
Contactless ignition VAPE-Simson 12V S51,Enduro Elektronik,Scooter Complete Set of ignition,spark-coil, Part of Set is electrical wiring harness. All together you connect without probHems. Part of Set is connection diagram Installation Instructions for Set SZ 10 -Simson S 51. Set of ignition SZ 10 is designated as REPLACEMENT the original ignition, lighting and charging system. If you do not have
Our Price 227.10 EUR
Cover for seal of output shaft - Simson S51 Simson Simson S51 type Electronic ( 50,60,70) Simson Simson S51 type Enduro ( 50,60,70)
Our Price 5.96 EUR
Cover of clutch (4-Speed, IFA), ALUMINIUM - Simson S51,S53,S70,SR50 Note: The clutch cover is manufactured to the highest quality. The material is aluminum with a polished surface. The clutch cover is marked "IFA & 4". It is designed for the left side of the engine. It is an original spare part. Can be used for: Simson S51, S70, SR50, SR80, Schwalbe KR51/2
Our Price 38.00 EUR
Cover of clutch (DZM Drive, 4-Speed), POLISHED (MZA) - Simson S51, S53, S70, SR50 Note: The clutch cover is manufactured to the highest quality. The material is aluminum with a polished surface. The clutch cover is marked "4". It is designed for the left side of the engine. It is an original spare part. Can be used for: Simson S51, S70, SR50, SR80, Schwalbe KR51/2. The product of the MZA, which
Our Price 73.48 EUR
Cover of frame (MZA) - Simson SR50, SR80 Note.: The frame cover is black and made of plastic. This is an original spare part. Can be used for: Simson SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 16.24 EUR
Cover of front light - Simson S50, S51, S70 Note: Cable entry hole is located on cover of front light. Can be used for: Simson S50, S51, S70
Our Price 10.24 EUR
Cover of ignition, ALUMINIUM (MZA) - Simson S51,S70,SR50,SR80, Schwalbe KR51/2 Note: The Ignition cover is manufactured to the highest quality. The material is aluminum with. The ignition cover is marked "SIMSON". It is designed for the right side of the engine. It is an original spare part. Can be used for: Simson S51, S70, SR50, SR80, Schwalbe KR51/2 The product of the MZA, which is the
Our Price 40.25 EUR
Cover of ignition, POLISHED (MZA) - Simson S51, S70, SR50, SR80, Schwalbe KR51/2 Note: The Ignition cover is manufactured to the highest quality. The material is aluminum with a polished surface. The ignition cover is marked "SIMSON". It is designed for the right side of the engine. It is an original spare part. Can be used for: Simson S51, S70, SR50, SR80, Schwalbe KR51/2 The product of the
Our Price 49.59 EUR
Cover of ignition, PVC (MZA) - Simson S51,S70,SR50,SR80, Schwalbe KR51/2 Can be used for: Simson S51, S70, SR50, SR80, Schwalbe KR51/2
Our Price 16.85 EUR
Cover of rear lamp, 100 mm (MZA) - Simson, MZ Note.: Product of the German company MZA. The product conforms to the E homologation. The diameter of rear lamp cover is 100 mm. The light cover is supplied with screws for a flat screwdriver. Can be used: Simson S50 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 10.96 EUR
Cover of rear lamp, 120 mm (MZA) - Simson, MZ Note.: Product of the German company MZA. The product conforms to the E24 homologation. The diameter of rear lamp cover is 120 mm. The light cover is supplied with screws for a flat screwdriver. Can be used: Simson S50, S51, S70, SR50, SR80 MZ ETZ: 125, 150, 250 MZ TS 250 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 12.94 EUR
Cover of rear shock absorbers (length 14,6cm), BLACK (MZA) - Simson Note.: Length of the cover is 14,6 cm and diameter is 4,6 cm. Plastic design. This is an original spare part. Can be used for: Simson
Our Price 6.14 EUR
STOCK
Cover of rear shock absorbers (length 14,6cm), CHROME (MZA) - Simson Note.: Length of the cover is 14,6 cm and diameter is 4,5 cm. Chome / steel design. This is an original spare part. Can be used for: Simson
Our Price 11.57 EUR
STOCK
Cover of rear shock absorbers (length 17,0cm), CHROME (MZA) - Simson Note.: Length of the cover is 17,0 cm and diameter is 4,5 cm. Chome / steel design. This is an original spare part. Can be used for: Simson
Our Price 11.92 EUR
STOCK
Cover of rear shock absorbers (length 17,5cm), BLACK (MZA) - Simson Note.: Length of the cover is 17,5 cm and diameter is 4,6 cm. Plastic design. This is an original spare part. Can be used for: Simson
Our Price 6.48 EUR
STOCK
Cover of speedometer (MZA) - Simson SR50, SR80 Note: This is an original spare part. The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 24.98 EUR
Cover of speedometer / rev-counter, D=60mm (MZA) - Simson S51, S53, S70, S83 Note: The cover is designed for speedometer / rev-counter with a diameter of 60 mm. This is an original spare part. Can be used for: Simson S51, S53, S70, S83 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 3.42 EUR
Cover of speedometer, D=48mm (MZA) - Simson S50, S51 Note: The cover is designed for speedometer with a diameter of 48 mm. This is an original spare part. Can be used for: Simson S50, S51 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 2.60 EUR
Cover of wheel hub, ALUMINUM (MZA) - Simson DIMENSIONS: outer diameter: 128 mm hole diameter (on the axis): 12 mm axle bore height: 11 mm Can be used for: Simson S50, S51, S53, S70, S83, SR50, SR80, Schwalbe KR51, Schwalbe KR51/2, Star SR4-2, Sperber SR4-3, Habicht SR4-4, Duo 4/1 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 14.56 EUR
Cover of wheel hub, POLISHED ALUMINUM (MZA) - Simson Note: Polished aluminum (outside) DIMENSIONS: outer diameter: 128 mm hole diameter (on the axis): 12 mm axle bore height: 11 mm Can be used for: Simson S50, S51, S53, S70, S83, SR50, SR80, Schwalbe KR51, Schwalbe KR51/2, Star SR4-2, Sperber SR4-3, Habicht SR4-4, Duo 4/1 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 16.40 EUR
Cover of winkers with seal "E"-mark, FRONT - Simson, MZ Note.: The product conforms to the E homologation. Can be used for: Simson S50, S51, S70, SR50, SR80 MZ ETZ: 125, 150, 250 MZ TS 250
Our Price 2.34 EUR
Cover of winkers with seal "E"-mark, REAR - Simson, MZ Note.: The product conforms to the E homologation. Can be used for: Simson S50, S51, S70, SR50, SR80 MZ ETZ: 125, 150, 250 MZ TS 250
Our Price 2.34 EUR
Cover plate of clutch (MZA) - Simson S51, S70, SR50, KR51/2 Note.: It is an original spare part. Can be used: Simson S51, S53, S70, S83, SR50, SR80, KR51/2, Sperber The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 6.31 EUR
Covers of levers - Simson Note: Black color made of reinforced plastic. The set includes a right + left cover, screws for mounting. total length: 21cm length without handle: 16 cm height: 14cm depth (without handle): 7 cm
Our Price 8.09 EUR
Crankshaft (MZA) - Simson S50 Note: The crankshaft is balanced. Crankshaft includes 1pcs of needle roller bearing. Can be used for: Simson S50, KR51/1, Duo, SR4-3 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 80.13 EUR
Crankshaft (MZA) - Simson S51, S53, SR50, KR51/2 Note: The crankshaft is designed for 50-61 ccm cylinders. The crankshaft is balanced. Crankshaft includes 1pcs of needle roller bearing. The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 53.72 EUR
Crankshaft (MZA) - Simson S70, S83, SR80 Note: The crankshaft is designed for 70ccm cylinders. The crankshaft is balanced. Crankshaft includes 1pcs of needle roller bearing. The crankshaft can also be used on Simson S51, SR50, KR51, if cylinder of 70 ccm is installed. The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 54.59 EUR
Crankshaft, TUNNING (MZA) - Simson S51, S53, S60, S61, SR50, KR51/2 * Note: The crankshaft is designed for 51-61 ccm cylinders. Needle bearing is also included. The Crankshaft is designed for high speeds in the tuning industry. By using the injected plastic on the crankshaft, precompression is increased and there is about 10% higher cylinder filling. The product of the MZA, which is the
Our Price 83.37 EUR
Crankshaft, TUNNING (MZA) - Simson S70, S83, SR80 Note: The crankshaft is designed for 70ccm cylinders. Needle bearing is also included. The Crankshaft is designed for high speeds in the tuning industry. By using the injected plastic on the crankshaft, precompression is increased and there is about 10% higher cylinder filling. The crankshaft is balanced. Crankshaft includes 1pcs of needle roller
Our Price 78.64 EUR
Cylinder 38,00 (50ccm), complete (ALMOT) - Simson S51 Set includes: Cylinder 38,00 (50ccm) piston 38,00 piston rings (2pcs) piston tenon safety clips of piston tenon (2pcs) gasket under the cylinder Can be used for: Simson S51, SR50 (to year 1993), Schwalbe, KR51/1 ALMOT is a manufacturer of high quality cylinders, heads and pistons for motorcycles with 30 years of experience on the market.
Our Price 79.59 EUR
Cylinder 40,00 (50ccm), complete (ALMOT) - Simson S50 Set includes: Cylinder 40,00 (50ccm) piston 40,00 piston rings (2pcs) piston tenon 12x31,5 safety clips of piston tenon (2pcs) gasket under the cylinder Can be used for: Simson S50 ALMOT is a manufacturer of high quality cylinders, heads and pistons for motorcycles with 30 years of experience on the market.
Our Price 81.57 EUR
Cylinder 41,00 (60ccm), complete (ALMOT) - Simson S60 Set includes: Cylinder 41,00 (60ccm) piston piston rings (2pcs) piston tenon safety clips of piston tenon (2pcs) gasket under the cylinder Can be used for: Simson S51, S61, SR50 (to year 1993), Schwalbe, KR51/1 ALMOT is a manufacturer of high quality cylinders, heads and pistons for motorcycles with 30 years of experience on the market.
Our Price 81.03 EUR
Cylinder 45,00 (70ccm), complete (ALMOT) - Simson S70 Set includes: Cylinder 45,00 (70ccm) piston 45,00 piston rings (2pcs) piston tenon safety clips of piston tenon (2pcs) gasket under the cylinder Can be used for: Simson S51, S70, KR51/2 ALMOT is a manufacturer of high quality cylinders, heads and pistons for motorcycles with 30 years of experience on the market.
Our Price 89.12 EUR
Cylinder head (ALMOT) - Simson S50 Can be used for: Simson S50 ALMOT is a manufacturer of high quality cylinders, heads and pistons for motorcycles with 30 years of experience on the market.
Our Price 31.09 EUR
Cylinder Head (ALMOT) - Simson S51 Can be used for: Simson S51, SR50 (to year 1993), Schwalbe, KR51/1 ALMOT is a manufacturer of high quality cylinders, heads and pistons for motorcycles with 30 years of experience on the market.
Our Price 23.21 EUR
Cylinder Head (ALMOT) - Simson S60 Can be used for: Simson S51, S61, SR50 (to year 1993), Schwalbe, KR51/1 ALMOT is a manufacturer of high quality cylinders, heads and pistons for motorcycles with 30 years of experience on the market.
Our Price 23.21 EUR
Cylinder Head (ALMOT) - Simson S70 Can be used for: Simson S51, S70, KR51/2 ALMOT is a manufacturer of high quality cylinders, heads and pistons for motorcycles with 30 years of experience on the market.
Our Price 26.41 EUR
Dial tire air pressure gauge meter / metal / Simple and accurate pressure reading Measures in both PSI (10 - 100 psi) and BAR (0,5 - 7,5 bar) Pressure release button Fitted with 45° angle chuck to allow easy connection to tire valve Material: metal
Our Price 5.03 EUR
