Introduction » Parts SIMSON
Spare parts SIMSON
Type S50, S51 Enduro/Elektronik, S70
- Accessories
- Bowdens & Rods
- Carburettor
- Cylinder-Crank mechanism
- Wheels-Brakes
- Engine-Bearings-Seals
- Fuel tank
- Front fork-Steering
- Gears / Shifting
- Frame-Stand-Footrests
- Handlebars
- Seats
- Clutch
- Lighting
- Exhaust muffler with knee
- Rear shocks
- Suction
- Ignition-Electrical
Cable 1.5 mm - WHITE (price per meter) For longer length, add to basket more pieces. ( 2 pcs = 2 meters of cable on the whole)
Our Price 0.37 EUR
Cable 1.5 mm - YELLOW (price per meter) For longer length, add to basket more pieces. ( 2 pcs = 2 meters of cable on the whole)
Our Price 0.37 EUR
Capacitor (MZA) - Simson, MZ Note: 0,22µF / 250V DC Can be used: Simson S50, S51, S70, SR50, SR80, KR51, Mofa SL 1, MZ ETZ The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 2.60 EUR
Capture of wheel reaction, POLISHED (MZA) - Simson Can be used for: Simson S50, S51, S53, S70, S83, SR50, SR80, Schwalbe KR51, Star SR4-2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 9.89 EUR
Capture of wheel reaction, UNPOLISHED (MZA) - Simson Can be used for: Simson S50, S51, S53, S70, S83, SR50, SR80, Schwalbe KR51, Star SR4-2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 8.27 EUR
Carburetor cap AMAL - Simson Note: The carburetor cap is designed for the AMAL carburetor. This is an original spare part.
Our Price 2.34 EUR
Carburetor cap BVF 16N1 (MZA) - Simson Note: The upper part of carburetor cover is provided with thread for the adjusting screw. The carburettor cover fits the BVF 16N1 carburetor series. This is an original spare part.
Our Price 4.76 EUR
Carburetor cap BVF 16N3 (MZA) - Simson Note: The upper part of carburetor cover is provided with thread for the adjusting screw. The carburettor cover fits the BVF 16N3 carburetor series. This is an original spare part.
Our Price 6.14 EUR
Carburetor float (BVF) - Simson Note.: Carburetor float is designed for all BFV carburetors: 16N1, 16N3, 19N1. It is an original spare part.
Our Price 3.78 EUR
Carburetor float AMAL - Simson Note: The carburetor float is designed for the AMAL carburetor. This is an original spare part.
Our Price 6.48 EUR
Carburetor float BING - Simson, Korádo Note: The carburetor float is designed for the BING carburetor. This is an original spare part. Can be used for: Simson Korádo Carburetors BING for motorcycles ... BING produces carburettors for motorcycles from 50 to more than 1000 ccm for over 70 years. Experienced engineers optimize the development of carburettors for fuel consumption and exhaust emissions
Our Price 22.37 EUR
Carburetor slider AMAL - Simson Note: The carburetor slider is designed for the AMAL carburetor. This is an original spare part.
Our Price 9.08 EUR
Carburetor slider BING - Simson, Manet Korádo Note: Slider is designed for the BING carburetor. This is an original spare part. Can be used for: Simson Manet korádo Carburetors BING for motorcycles ... BING produces carburettors for motorcycles from 50 to more than 1000 ccm for over 70 years. Experienced engineers optimize the development of carburettors for fuel consumption and exhaust emissions
Our Price 14.26 EUR
Carburetor slider BVF 16N1 (MZA) - Simson Note: Only for carburettor type BVF 16N1. This is an original spare part.
Our Price 3.96 EUR
Carburetor slider BVF 16N3 (MZA) - Simson Note: Only for carburettor type BVF 16N3. This is an original spare part.
Our Price 3.78 EUR
Carburetor Ø16 mm (AMAL) - Simson (50ccm) Note: Carburettor AMAL is suitable for motorcycles SIMSON. The carburettor is optimal for tuning cylinders, but can also be used with standard cylinders. It is suitable for the Simson flange. Now with reinforced SIMSON flange. This is an original spare part. Built-in main nozzle: 6516,00 mm - for standard and tunning cylinders (50 ccm) Can be used
Our Price 42.94 EUR
Carburetor Ø18 mm (AMAL) - Simson (60ccm - 70 ccm) Note: Carburettor AMAL is suitable for motorcycles SIMSON. The carburettor is optimal for tuning cylinders, but can also be used with standard cylinders. It is suitable for the Simson flange. Now with reinforced SIMSON flange. This is an original spare part. Built-in main nozzle: 7518,00 mm - for standard and tunning cylinders (60ccm - 70ccm)
Our Price 42.94 EUR
Carburetor Ø19 mm (AMAL) - Simson (60ccm - 70ccm) Note: Carburettor AMAL is suitable for motorcycles SIMSON. The carburettor is optimal for tuning cylinders, but can also be used with standard cylinders. It is suitable for the Simson flange. Now with reinforced SIMSON flange. This is an original spare part. Built-in main nozzle: 8019,00 mm - for standard and tunning cylinders (60-70 ccm) Can
Our Price 42.94 EUR
Carburetor Ø21 mm (AMAL) - Simson (60ccm - 70ccm) Note: Carburettor AMAL is suitable for motorcycles SIMSON. The carburettor is optimal for tuning cylinders, but can also be used with standard cylinders. It is suitable for the Simson flange. Now with reinforced SIMSON flange. This is an original spare part. Built-in main nozzle: 9021,00 mm - for standard and tunning cylinders (60ccm - 70ccm)
Our Price 42.94 EUR
Carburettor 1101 (BING) - Simson S70, S83 Note: Carburettor Bing 17/15/1101 is certified by TÜV for models Simson S51, S70, SR50, SR80. Others models are without a certificate TÜV. German installation instructions are available. This is an original spare part. Package contents:Bing Carburetor 1pcsBing carburetor flange (complete with sealing ring)Screws 2pcsRubber guards 2pcsClamp 1pcs
Our Price 132.06 EUR
Carburettor 1103 (BING) - Simson S51, S53, S60 Note: Carburettor Bing 17/15/1103 is certified by TÜV for models Simson S51, S70, SR50, SR80. Others models are without a certificate TÜV. German installation instructions are available. This is an original spare part. Package contents:Bing Carburetor 1pcsBing carburetor flange (complete with sealing ring)Screws 2pcsRubber guards 2pcsClamp 1pcs
Our Price 132.06 EUR
STOCK
Carburettor 16N1-11 (BVF) - Simson S51,S70 Note.: BVF carburetor for Simson motorcycles. The carburetor is complete, ready to be assembled. It is supplied with installation instructions in the German language. This is an original spare part. Main nozzle: 72 Idle nozzle: 35 starting nozzle 50
Our Price 49.59 EUR
Carburettor 16N1-8 (BVF) - Simson S50 Note.: BVF carburetor for Simson motorcycles. The carburetor is complete, ready to be assembled. It is supplied with installation instructions in the German language. This is an original spare part. Main nozzle: 70 Idle nozzle: 35 starting nozzle 50
Our Price 50.13 EUR
Carburettor 16N3-2 (BVF) - Simson SR50 Note.: BVF carburetor for Simson motorcycles. The carburetor is complete, ready to be assembled. It is supplied with installation instructions in the German language. This is an original spare part. Main nozzle: 70 Idle nozzle: 35 Starting nozzle: 60
Our Price 48.15 EUR
Carburettor 16N3-4 (BVF) - Simson S51, S53, S83, S70 Note.: BVF carburetor for Simson motorcycles. The carburetor is complete, ready to be assembled. It is supplied with installation instructions in the German language. This is an original spare part. Main nozzle: 70 Idle nozzle: 35 Starting nozzle: 60
Our Price 48.15 EUR
Carburettor 16N3-5 (BVF) - Simson S70, S83 Note.: BVF carburetor for Simson motorcycles. The carburetor is complete, ready to be assembled. It is supplied with installation instructions in the German language. This is an original spare part. The carburetor is designed for the S70 and S83 Enduro, but can also be used with normal models. Main nozzle: 72 Idle nozzle: 35 Starting nozzle: 60
Our Price 49.04 EUR
Carburettor 21N1-11 (BVF), TUNNING - Simson S51,S70 Note.: The BVF carburetor with more peak power due to a larger cross section of 21mm passage (22mm throttle) in a completely new housing (new mold). The BVF carburetor has a much better and cleaner mixture preparation (throttle response & part load behavior) due to a completely new part-load needle shape in connection with a suitable atomizer
Our Price 53.72 EUR
CARLSON - Brake cleaner Brake cleaner is designed for efficient cleaning of disc and drum brakes, linings, clutches, brake cylinders and bushings. Effectively removes grease, brake fluid, oil, grease, tar, etc.
Our Price 3.23 EUR
CARLSON - Chain cleaner Chain Cleaner removes oil residues and old lubricants. Provides good adhesion of the lubricant.
Our Price 4.50 EUR
CARLSON - Chain spray Chain spray lubricates twowheeler driving chains. Protects against friction and prolongs the service time of the chain. Apply on a clean chain.
Our Price 4.32 EUR
CARLSON - Chromium polish (CREAM) Cleaning agent for chromium and chromium-plated parts. Effectively removes tough dirt and rust. Restores the original shine of surface and has and antistatic effect. Covers the surface with a weather-proof film.
Our Price 6.11 EUR
CARLSON - Contact spray Spray clean the contacts of all kinds. Protects of friction surfaces, dissolves the oxide layers, dirt, grease and rust, displaces water and moisture, and restores low contact resistance.
Our Price 4.49 EUR
CARLSON - Engine cleaner Ava Plus Highly effective agent for cleaning car engines. Perfectly removes any dirt and grease from engines and other machines.
Our Price 6.11 EUR
CARLSON - Old paint polish Old paint polish removes dirt and oxide layer of the paint. Forms a smooth, water-repellent film and restores the original colour and shine of old paints. Contains an UV protection filter that protects the paint from the effects of sun rays. Restores shine of older and a bit weathered paints.
Our Price 5.75 EUR
CARLSON - Screw and rust remover Agent for rust removal on metal parts of machines, pipes and metal sheets. Leaves a protecting layer, helps restore material.
Our Price 3.63 EUR
CARLSON - Tyre care, aerosol Agent for restoring a protection of tyres. Penetrates the tyre to protect it from aging and cracking, dries quickly and leaves gloss.
Our Price 5.03 EUR
CARLSON - Tyre care, cream The agent provides protection and refreshes colours of tyres. Creates a long lasting protective weather-proof film in a minute.
Our Price 6.11 EUR
CARLSON - Tyre repair Intended for all types of tubeless tyres. Suitable for motorcycles, cars, caravans and small vans. Emergency aid for the flat tyre, seals the holes and re-in flates the tyre. Suitable for tyres up to 15“.
Our Price 7.52 EUR
Catch of rod and spring - nut Simson S51
Our Price 3.46 EUR
STOCK
Chain case cover, BLACK (EU) - Simson S50, S51, S70, Schwalbe Can be used: Simson S50, S51, S70, Schwalbe
Our Price 5.39 EUR
Chain case cover, BLACK (MZA) - Simson S50, S51, S70, Schwalbe Can be used: Simson S50, S51, S70, Schwalbe The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 17.79 EUR
Chain case cover, BLACK (MZA) - Simson SR50, SR80 Can be used: Simson SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 5.96 EUR
Chain case cover, CHROMED LOOK (MZA) - Simson S50, S51, S70, Schwalbe Can be used: Simson S50, S51, S70, Schwalbe The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 16.89 EUR
Chain case cover, CHROMED LOOK (MZA) - Simson SR50, SR80 Can be used: Simson SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 13.91 EUR
Chain coupling, secondary 1/2 x 5/2 (CZ) - JAWA Pionýr, Babetta, Simson Can be used for: JAWA 50 type 550, 555 JAWA 50 type 05, 20, 21, 23 Babetta type 207, 210, 225 Simson S50, S51, S70, S53, S83, SR50, SR80
Our Price 0.72 EUR
Chain tensioner (MZA) - Simson Can be used for: Simson S50, S51, S70, SR50, SR80, KR51 The product of the MZA, which is the exclusive holder of the SIMSON brand
Our Price 2.16 EUR
Chain tensioner - Simson Can be used for: Simson S50, S51, S70, SR50, SR80, KR51
Our Price 0.96 EUR
STOCK
Chain wheel 11t. - Simson S50 Simson Schwalbe Simson Simson S50 Simson Star
Our Price 7.95 EUR
Chain wheel 14t. - Simson S50 Simson Schwalbe Simson Simson S50 Simson Star
Our Price 7.95 EUR
Chain wheel 13t. - Simson S50 Simson Schwalbe Simson Simson S50 Simson Star
Our Price 7.95 EUR
Chain wheel 16t. - Simson S50 Simson Schwalbe Simson Simson S50 Simson Star
Our Price 7.95 EUR
Chain, secondary 110 links 1/2 x 5,4 (MZA) - Simson S51, S53, S70, S83 Note: The chain has 110 links 1/2 x 5,4. Chain coupling included. The chain is from the German manufacturer METEOR. This is an original spare part. Can be used for: Simson S51, S53, S70, S83 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 14.56 EUR
STOCK
Chain, secondary 112 links 1/2 x 5,4 (MZA) - Simson S50 Note: The chain has 112 links 1/2 x 5,4. Chain coupling included. The chain is from the German manufacturer METEOR. This is an original spare part. Can be used for: Simson S50, KR51/2, Duo Simson S51*, S53*, S70*, S83* (*recommended length for larger gears - 17, 18) The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 15.45 EUR
Chain, secondary 112 links 1/2 x 5/2 (CZ) - JAWA Pionýr, Babetta, Simson Note: Designation by the manufacturer ČZ 086 Can be used for: JAWA 50 type 550, 555 JAWA 50 type 05, 20, 21, 23 Babetta type 207, 210, 225 Simson S50, S51, S70, S53, S83, SR50, SR80
Our Price 13.12 EUR
Chain, secondary 94 links 1/2 x 5,4 (MZA) - Simson SR50, SR80 Note: The chain has 94 links 1/2 x 5,4. Chain coupling included. The chain is from the German manufacturer METEOR. This is an original spare part. The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 13.30 EUR
Charging coil 12V 21W (MZA) - Simson Note: The light coil is designed for (brake light) with 21W bulb. The light coil is designed for the ignition circuit breaker and is located directly on the engine motherboard. The light coil generates power for the brake light and battery charging system. Light coil is only intended for use with a rectifier or AC voltage regulator. Mounting Screw Thread: M4
Our Price 17.06 EUR
Charging coil 6V 21W (MZA) - Simson Note: The light coil is designed for (brake light) with 21W bulb. The light coil is designed for the ignition circuit breaker and is located directly on the engine motherboard. The light coil generates power for the brake light and battery charging system. Mounting Screw Thread: M4 Distance between mounting bolts (between bolt centers): 40 mm Coil height
Our Price 17.07 EUR
Charging system 6V (8871.6/2) (MZA) - Simson S51, S70 Note.: Charging system (8871.6/2) has 4 cables and 1 coil. Charging is via the rectifier. Can be used for: Simson S51, S70 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 25.02 EUR
Charging system 6V 25W (8871.3) (MZA) - Simson S50B, S50B1 Note: The charging system (8871.3) has 5 cables and 2 coils. The charging system is used to charge the battery. Charging is via the rectifier. Can be used for: Simson S50B, S50 B1 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 21.43 EUR
Charging system 6V 35W (8871.5) (MZA) - Simson S50B2 Note: The charging system (8871.5) has 5 cables and 2 coils. The charging system is used to charge the battery. Charging is via the rectifier. Can be used for: Simson S50 B2, S51 B2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 23.36 EUR
Clamping tape, set (length 5m / width 5mm) - UNI Note .: The use is universal. The tape length is adjusted to a specific diameter. The joint is firm and does not loosen. For example, it can be used on front fork cuffs. Set includes: Motex tape: length 5m, width 5mm Tape clips: 10 pcs Split pins: 10 pcs
Our Price 2.34 EUR
Clipboard lock (MZA) - Simson S50, S51, S70 Note: The side cover lock contains 2 keys. This is an original spare part. Can be used for: Simson S50, S51, S70 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 9.89 EUR
STOCK
Clutch adjusting screw M6x20 with nut - Simson Can be used for: Simson S50, S51, S53, S70, S83, SR50, SR80, Schwalbe KR51, Schwalbe KR51/1, Schwalbe KR51/2, KR50, Spatz SR4-1, Star SR4-2/1
Our Price 0.55 EUR
Clutch basket with pinion (MZA) 62+21 - Simson S70, S83, SR80 Note.: Clutch basket has 62 teeth, the primary pinion has 21 teeth. Clutch basket with a bronze bush and collar bush with additional lubrication grooves. The product matches the original quality. Can be used: Simson S70, S83, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 39.35 EUR
Clutch basket with pinion 62+21 (MZA) - Simson S70, S83, SR80 Note.: Clutch basket has 62 teeth, the primary pinion has 21 teeth. This is a lightweight sports version. Can be used: Simson S70, S83, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 44.92 EUR
Clutch basket with pinion 65+20 (MZA) - Simson S51, S53, SR50, KR51/2 Note.: Clutch basket has 65 teeth, the primary pinion has 20 teeth. This is a lightweight sports version. Can be used: Simson S51, S53, SR50, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 46.54 EUR
Clutch basket with pinion 65+20 (MZA) - Simson S51, S53, SR50, KR51/2 Note.: Clutch basket has 65 teeth, the primary pinion has 20 teeth. Clutch basket with a bronze bush. The product matches the original quality. Can be used: Simson S51, S53, SR50, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 57.49 EUR
Clutch carrier (MZA) - Simson Note.: The spare part is suitable for SIMSON. This is an original spare part. Can be used for: Simson S50, S51, S53, S70, S83, SR50, SR80, SD50, KR51/2, Sperber The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 23.94 EUR
