Introduction » Parts ČZ type 476-488 /471,472
Spare parts ČZ 125/175
ČZ 125 type 476, ČZ 175 type 477, ČZ 175 type 487, ČZ 125 type 488 / ČZ 250 type 471,ČZ 350 type 472
- Accessories
- Bowdens
- Carburettor
- Wheels-Brakes
- Engine-Bearings-Seals
- Fuel tank
- Front fork-Steering
- Gears-Transmission
- Frame
- Handlebars
- Seats
- Clutch
- Stand-Footrests
- Lighting
- Suction
- Exhaust muffler with knee
- Cylinder-Crankshaft
- Rear shocks
- Ignition-Electrical
Rubber under ČZ lower glasses with a narrow groove (only for ČZ) Note: Rubber into which the cover of the front shock absorber is inserted.
Our Price 3.23 EUR
Safety spring of front shock pump - JAWA, ČZ (since 1956) Lze použít pro: Jawa 250 type 559 Panelka, since 1962 Jawa 250 type 592, since 1969 Jawa 250 type 590 Sport, since 1965 Jawa 350 type 360 Panelka, since 1964 Jawa 350 type 361 Sport, since 1965 Jawa 350 type 362 Californian,since 1969 Jawa,ČZ 125 type 351 since 1954 Jawa,ČZ 150 type 352 since 1954 Jawa,ČZ 125 type 355 Kývačka since 1956
Our Price 0.53 EUR
Screw (worm) M6x6 of throttle sleeve - JAWA, ČZ
Our Price 0.27 EUR
STOCK
Screw of starter kickstarter lever M7 - JAWA, ČZ ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 175 scooter type 501 - two exhausts ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ 250 type 455 ČZ ČZ 250 type 471 - two cylinders ČZ ČZ 250 type 475 - Sport ČZ ČZ 350
Our Price 0.18 EUR
Screw of left glider M8x1 - JAWA, ČZ Note: for 14 key
Our Price 2.34 EUR
Screw of number plate with reflector, M6X20 - RED
Our Price 2.34 EUR
Screw of number plate with reflector, M6X20 - WHITE
Our Price 2.34 EUR
Screw of rotor M6x100 mm - Jawa, ČZ Jawa 250/350 Pérák Jawa 350 634-640 Jawa - ČZ 125/175 ČZ 125,175/250 ČZ 125/175
Our Price 0.53 EUR
Screw, worm to ensure of speedometer drive - JAWA ČZ ČZ 250 typ 471 - two cylinders ČZ ČZ 350 type 472 - two cylinders JAWA 250 Bizon type 623 JAWA 350 Bizon type 633 JAWA 350 type 18 (Pérák) JAWA 350 type 360 (Panelka) JAWA 350 type 361 (Sport) JAWA 350 type 362 (Californian) JAWA 350 type 634 JAWA 350 type 638 TS JAWA 350 type 639 TS JAWA 350 type
Our Price 0.19 EUR
Screws of horn cover (set), POLISHED STAINLESS STEEL - JAWA, ČZ Note.: The set contains 6 screws with washers and nuts.
Our Price 7.95 EUR
Screws of horn grid (set of 6 pcs), flat head - JAWA, ČZ Note: The set contains 6 screws with washers and nuts.
Our Price 1.62 EUR
Seal of carburetor flange - JAWA, ČZ Can be used for: ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 175 rikša type 505 ČZ ČZ 175 skutr type 501 ČZ ČZ 175 skutr type 502 ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ 250 type 455 ČZ ČZ 250 type 471 ČZ ČZ 250 type 475 ČZ ČZ 350 type 472 JAWA - ČZ Jawa - ČZ
Our Price 0.18 EUR
Seal of carburetor flange, thermal - JAWA, ČZ Can be used for: ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 175 rikša type 505 ČZ ČZ 175 skutr type 501 ČZ ČZ 175 skutr type 502 ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ 250 type 455 ČZ ČZ 250 type 471 ČZ ČZ 250 type 475 - Sport ČZ ČZ 350 type 472 JAWA
Our Price 0.90 EUR
Seal of wheel with hub (14,8mm), set 3pcs - ČZ Note: Note: Seal dimensions: plug of wheel hub - sealing (CZ) d=14,6 mm / plug of wheel hub - sealing with recess (CZ) d=14,8 mm / O-ring 4,6x2,3 Can be used for: ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 125 type 476 ČZ ČZ 175 rikša type 505 ČZ ČZ 175 type 501 ČZ ČZ 175 type 502 ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 175
Our Price 1.43 EUR
Seal of wheel with hub (16mm), set 3pcs - JAWA 634-640, Kývačka, Panelka Note.: Plugs of wheel with hub - external dimension: 16 mm Can be used for: ČZ ČZ 125 type 488 ČZ ČZ 175 type 487 ČZ ČZ 250 type 471 ČZ ČZ 350 type 472 JAWA 250 Bizon type 623 JAWA 250 type 11 (Pérák) JAWA 250 type 353 (Kývačka) JAWA 250 type 559 (Panelka) JAWA 250 type 590 (Sport) JAWA 350 Bizon type 633 JAWA 350 type 18
Our Price 1.12 EUR
Sealing of petrol valve - JAWA, ČZ ČZ ČZ 125 A ČZ ČZ 125 B ČZ ČZ 125 T ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 125,150 C ČZ ČZ 175 rikša type 505 ČZ ČZ 175 skutr type 502 - one silincer ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ 250 type 455
Our Price 0.43 EUR
Sealing wristband of starting lever - JAWA, ČZ ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 175 rikša type 505 ČZ ČZ 175 skutr type 501 - two exhausts ČZ ČZ 175 skutr type 502 - one exhasut ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ 250 type 455 ČZ ČZ 250 type 471 - two exhausts ČZ ČZ 250 type 475 - Sport
Our Price 0.27 EUR
Seat foam (TUR) - ČZ 476-488 Note.: Seat foam made in form. Can be used for: ČZ 125 typ 476 ČZ 125 typ 488 ČZ 175 typ 477 ČZ 175 typ 487
Our Price 25.02 EUR
Seat, BLACK (EU) - ČZ 476-477, 471-472 Can be used for: ČZ 125 type 476 ČZ 175 type 477 ČZ 250 type 471 ČZ 350 type 472
Our Price 152.17 EUR
Seat, RED-BLACK (EU) - ČZ 476-477, 471-472 Can be used for: ČZ 125 type 476 ČZ 175 type 477 ČZ 250 type 471 ČZ 350 type 472
Our Price 152.17 EUR
Semi-automatic gearshift - ČZ 175 ČZ ČZ 175 type 477 ČZ ČZ 175 type 487
Our Price 14.26 EUR
Set for aluminum and other nonferrous metals, type C (100 mm) Used for polishing HARDLY oxidized aluminum and other non-ferrous metals. For each type of paste, we recommend your own disc. Do not confuse disks that are used for sanding with discs that you use to polish!!! The paste is applied to the spinning wheel and gently applying to the disc for about 4sec. The application time affects the
Our Price 23.35 EUR
Set for aluminum and other nonferrous metals, type C (130 mm) Used for polishing HARDLY oxidized aluminum and other non-ferrous metals. For each type of paste, we recommend your own disc. Do not confuse disks that are used for sanding with discs that you use to polish!!! The paste is applied to the spinning wheel and gently applying to the disc for about 4sec. The application time affects the
Our Price 24.07 EUR
Set of bulbs, TYPE A - ČZ 125/175 ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 Set includes:bulb 6V 45/40W P45Tbulb 6V 4W BA9Sbulb 6V 5W BA15Sbulb 6V 21W BA15Sbulb 6V 2W BA7Sfuse - 16A
Our Price 3.81 EUR
STOCK
Set of engine mounting bolts (M8x1x46) - JAWA, ČZ Note Made according to the original. The set contains 6 pcs of screws, 12 pcs of washers and 6 pcs of nuts. Screw design OK14, M8x1x46.
Our Price 14.26 EUR
STOCK
Set of engine screws - ČZ 476-488 Can be used for: ČZ 125 typ 476 ČZ 125 typ 488 ČZ 175 typ 477 ČZ 175 typ 487
Our Price 11.13 EUR
Set of engine screws (set of 20pcs) - JAWA 350 634, Bizon, ČZ 13 pcs for engine blocks5 pcs for left cover (clutch)2 pcs for right cover (ignition) ČZ ČZ 250 type 471 - two cylinders ČZ ČZ 350 type 472 - two cylinders JAWA 250 Bizon type 623 JAWA 350 Bizon type 633 JAWA 350 type 634
Our Price 2.51 EUR
Set of stickers, BLACK/GOLD - ČZ 472 Size 65,5 x 48,5 cm ČZ ČZ 350 type 472 - two cylinders
Our Price 5.62 EUR
Set of stickers, RED/BLACK - ČZ 472 Size 65,5 x 48,5 cm ČZ ČZ 350 type 472 - two cylinders
Our Price 5.62 EUR
Set of stickers, RED/GOLD - ČZ 472 Size 65,5 x 48,5 cm ČZ ČZ 350 type 472 - two cylinders
Our Price 5.62 EUR
Set screw of bowden M6x30 - slicing through Brand Type ČZ ČZ 125 A ČZ ČZ 125 B ČZ ČZ 125 T ČZ ČZ 125 typ 453 ČZ ČZ 125 typ 473 - Sport ČZ ČZ 125,150 C ČZ ČZ 175 rikša typ 505 ČZ ČZ 175 skutr typ 501 - dvouvýfuk ČZ ČZ 175 skutr typ 502 - jednovýfuk ČZ ČZ 175 typ 450 ČZ ČZ 175 typ 470 - Sport ČZ ČZ 250 typ 455 ČZ ČZ 250 typ 471 - dvouválec ČZ
Our Price 1.43 EUR
Shaft of gear - ČZ 476-488 ČZ ČZ 125 typ 476 ČZ ČZ 125 typ 488 ČZ ČZ 175 typ 477 ČZ ČZ 175 typ 487
Our Price 13.31 EUR
Shaft of gearbox, main 12t - ČZ 476-488 ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 175 type 477 ČZ ČZ 175 type 487
Our Price 16.90 EUR
Shift fork - ČZ 125/175/250 ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 175 rikša type 505 ČZ ČZ 175 skutr type 501 - two exhaust ČZ ČZ 175 skutr type 502 - one exhaust ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ 250 type 455 ČZ ČZ 250 type 475 - Sport
Our Price 4.70 EUR
Shock absorber (REAR), BLACK (CZ) - JAWA 350 638-640, ČZ 476-488 Note.: In the upper part of the schock absorber, there is a ČZ mark on the casting, including the catalog number and type designation. DIMENSIONS: Lenght (to the center of attachment - pitch of holes) 320 mm, average of holes 12 mm Can be used for: ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ
Our Price 53.54 EUR
Shock absorber (rear), CHROME (CZ) - JAWA 350 638-640, ČZ 476-488 Note.: In the upper part of the schock absorber, there is a ČZ mark on the casting, including the catalog number and type designation. DIMENSIONS: Lenght (to the center of attachment - pitch of holes) 320 mm, average of holes 12 mm Can be used for: ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ
Our Price 53.53 EUR
Shock absorber (rear), CHROME (CZ) - JAWA 350 640 Note.: In the upper part of the schock absorber, there is a ČZ mark on the casting, including the catalog number and type designation. DIMENSIONS: Lenght (to the center of attachment - pitch of holes) 320 mm, average of holes 12 mm Can be used for: ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ 250 type 471 ČZ
Our Price 58.03 EUR
Shock absorber oil - MOL Hydro SA 15 (1000 ml) Operating fluid for hydraulic shock absorbers for vehicles. Excellent hydraulic oil of viscosity class ISO VG 15 for equipment where performance level ISO-L-LM (DIN HLP) is required. Product features Low low temperature viscosity / Ensures proper operation of hydraulic controls even in winter Compatible with common sealing materials / Lower
Our Price 6.29 EUR
Shock absorbers REAR, SET (TWN) - JAWA 350 638-640, ČZ 476-488 Note.: Lenght (to the center of attachment - pitch of holes) 320 mm, average of holes 12 mm. Lze použít pro: ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ 250 type 471 - two cylinders ČZ ČZ 350 type 472 - two cylinders JAWA 250 Bizon type 623 JAWA 350 Bizon type 633 JAWA 350 type 634 JAWA 350 type
Our Price 39.35 EUR
Sifter of fuel valve (new valves) - JAWA, ČZ Note: Designed for mounting on fuel valves of new production. It can be mounted on old used fuel valves after slight heating.
Our Price 2.08 EUR
Sifter of fuel valve (original valves) - JAWA, ČZ Note: Designed for mounting on original original valves. Sieve diameter 11 mm.
Our Price 2.88 EUR
Silentblock of instrument panel - ČZ 477-488 ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ 250 type 471 - two cylinders ČZ ČZ 350 type 472 - two cylinders
Our Price 3.63 EUR
STOCK
Silentblock of rear telescope - JAWA 350 634-640 ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ 250 type 471 - two cylinders ČZ ČZ 350 type 472 - two cylinders JAWA 250 Bizon type 623 JAWA 350 Bizon type 633 JAWA 350 type 634 JAWA 350 type 638 TS JAWA 350 type 639 TS JAWA 350 type 640 JAWA 350 type 640 Tramp
Our Price 1.30 EUR
SILICHROM EX - Chrome cleaning and polishing paste (120g) Paste for cleaning and polishing chrome, metals and brass. It allows you to effectively clean and polish oxidized, corrosion-damaged chrome and metal parts of cars and motorcycles.
Our Price 3.96 EUR
Simmering 25x62x8 (MVQ), SILICONE NOTE.: (MVQ) SILICONE Operating temperature: – 60 to +210 °C Resistant to mineral oils and lubricants It is not resistant to water, acids, synthetic automotive brake fluids Can be used for: ČZ ČZ 250 type 471 ČZ ČZ 350 type 472 JAWA 250 Bizon type 623 JAWA 250 type 11 (Pérák) JAWA 250 type 353 (Kývačka) JAWA 250 type 559 (Panelka) JAWA 250 type 590 (Sport) JAWA
Our Price 1.30 EUR
Simmering 25x62x8 - JAWA ČZ ČZ 250 type 471 - two cylinders ČZ ČZ 350 type 472 - two cylinders JAWA 250 Bizon type 623 JAWA 250 type 11 (Pérák) JAWA 250 type 353 (Kývačka) JAWA 250 type 559 (Panelka) JAWA 250 type 590 (Sport) JAWA 350 Bizon type 633 JAWA 350 type 18 (Pérák) JAWA 350 type 354 (Kývačka) JAWA 350 type 360 (Panelka) JAWA 350 type 361 (Sport) JAWA 350 type 362 (Californian) JAWA 350
Our Price 1.07 EUR
Sleeve of throttle handle (slider) - JAWA, ČZ
Our Price 3.50 EUR
Socks for best motorbike rider (36-41), RED - Black pistons & shock-absorbers Design socks made in Czech republic. Size 36-41. Composition: 80% Cotton / 15% Polyamide / 5% Elastan
Our Price 4.50 EUR
Socks for best motorbike rider (36-41), WHITE - Black pistons & shock-absorbers Design socks made in Czech republic. Size 36-41. Composition: 80% Cotton / 15% Polyamide / 5% Elastan
Our Price 4.50 EUR
Socks for best motorbike rider (42-46), RED - Black pistons & shock-absorbers Design socks made in Czech republic. Size 42-46. Composition: 80% Cotton / 15% Polyamide / 5% Elastan
Our Price 4.50 EUR
Socks for best motorbike rider (42-46), WHITE - Black pistons & shock-absorbers Design socks made in Czech republic. Size 42-46. Composition: 80% Cotton / 15% Polyamide / 5% Elastan
Our Price 4.50 EUR
SOUDAL - Metal plastic extra fine 1kg Extra fine, high quality two component polyester based body filler for the finishing of damaged surfaces prior to painting. The extra fine formulation is very easy to sand and smoothen. Applications: Filling of scratches, tears and dents in metal plates, including zinc and galvanized steel. Reparing scratches and dents in cars. Repairs of metal, polyester and
Our Price 12.24 EUR
SOUDAL - Metal plastic standard 250g General purpose, high quality two component polyester body filler for the repair of damaged surfaces (scratches, dents and tears) in metals, polyester or timber. Very easy to mix and apply. Applications: Filling of scratches, tears, dents in metal plates, even zinced and galvanized. Repairing scratches, cracks, dents in cars. Repairs of metal, polyester and
Our Price 5.59 EUR
SOUDAL - Polyfiber 250g High quality, glass fibre reinforced, two component polyester body filler for the repair of damaged surfaces (dents, scratches and tears) in metals, wood or polyester. Very easy to mix and apply. Fast curing and can be sanded after about 20 minutes. The glass fibres add additional strength to weakened car body parts. Applications: Heavy duty filling of scratches, tears,
Our Price 6.31 EUR
STOCK
Spacer of gear sprocket wheel 20x28x10 - ČZ ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 125 type 476 ČZ ČZ 175 rikša type 505 ČZ ČZ 175 scooter type 501 - two exhausts ČZ ČZ 175 skutr type 502 - one exhaus ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 175 type 477 ČZ ČZ 250 type 455 ČZ ČZ 250 type 475 - Sport JAWA - ČZ Jawa - ČZ 125 type 355 JAWA - ČZ Jawa - ČZ 175 type 356
Our Price 1.30 EUR
Spacer of wheel bearings 50 mm - Panelka, 634-640 ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ 250 type 471 - two cylinders ČZ ČZ 350 type 472 - two cylinders JAWA 250 Bizon type 623 JAWA 250 type 559 (Panelka) JAWA 250 type 590 (Sport) JAWA 350 Bizon type 633 JAWA 350 type 360 (Panelka) JAWA 350 type 361 (Sport) JAWA 350 type 362 (Californian) JAWA 350 type
Our Price 1.04 EUR
Spacer tube of front fork bushing - (32x30x47mm) - JAWA, ČZ since 1954 Can be used for: Jawa 250 type 559 Panelka, since 1962 Jawa 250 type 592, since 1969 Jawa 250 type 590 Sport, since 1965 Jawa 350 type 360 Panelka, since 1964 Jawa 350 type 361 Sport, since 1965 Jawa 350 type 362 Californian, since 1969 Jawa,ČZ 125 type 351 since 1954 Jawa,ČZ 150 type 352 since 1954 Jawa,ČZ 125 type 355 Kývačka
Our Price 2.87 EUR
Spark plug (CZ) - BRISK N14C Single-electrode wide-range spark plug with a middle electrode made of a special alloy filled with a copper core with high thermal conductivity. Exchange interval: max. 30.000 km Thread: M 14x1,25 Recommended tightening torque: 20-30 Nm Thread length: 12,7 mm Wrench size: 21 mm NOTICE: The strictly specified tightening torque for mounting the spark plug to the engine
Our Price 2.16 EUR
Spark plug (CZ) - BRISK N15C Single-electrode wide-range spark plug with a middle electrode made of a special alloy filled with a copper core with high thermal conductivity. Exchange interval: max. 30.000 km Thread: M 14x1,25 Recommended tightening torque: 20-30 Nm Thread length: 12,7 mm Wrench size: 21 mm NOTICE: The strictly specified tightening torque for mounting the spark plug to the engine
Our Price 2.16 EUR
Spark plug (CZ) - BRISK N17C Single-electrode wide-range spark plug with a middle electrode made of a special alloy filled with a copper core with high thermal conductivity. Exchange interval: max. 30.000 km Thread: M 14x1,25 Recommended tightening torque: 20-30 Nm Thread length: 12,7 mm Wrench size: 21 mm NOTICE: The strictly specified tightening torque for mounting the spark plug to the engine
Our Price 2.16 EUR
