Introduction » Parts SIMSON
Spare parts SIMSON
Type S50, S51 Enduro/Elektronik, S70
- Accessories
- Bowdens & Rods
- Carburettor
- Cylinder-Crank mechanism
- Wheels-Brakes
- Engine-Bearings-Seals
- Fuel tank
- Front fork-Steering
- Gears / Shifting
- Frame-Stand-Footrests
- Handlebars
- Seats
- Clutch
- Lighting
- Exhaust muffler with knee
- Rear shocks
- Suction
- Ignition-Electrical
Fender, FRONT (GREY) - Simson Can be used for: Simson S50, S51, S70
Our Price 31.00 EUR
Fender, FRONT (INOX) - Babetta 210, 225 Can be used for: Babetta 210, 225
Our Price 22.10 EUR
Fender, REAR (BLACK) - Simson Can be used for: Simson S50, S51, S70
Our Price 27.00 EUR
Fender, REAR (CHROME) - Babetta 210, 225 Can be used for: Babetta 210, 225
Our Price 28.38 EUR
STOCK
Fender, REAR (GREY) - Simson Can be used for: Simson S50, S51, S70
Our Price 27.50 EUR
Fender, REAR - Babetta 210, 225 Can be used for: Babetta 210, 225
Our Price 26.23 EUR
Filter of fuel valve (MZA) - Simson, MZ Note: This is an original spare part from EHR company (supplier MZA). Can be used for: Simson S50, S51, S70, SR50, SR80, SR2 MZ The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 3.63 EUR
Filter of gasoline valve, drain - Simson, MZ MZ MZ 125 ETZ MZ MZ 125 type TS MZ MZ 150 ETZ MZ MZ 150 type TS MZ MZ 250 ETZ ( standard,luxus ) MZ MZ 250 type TS MZ MZ 251 ETZ MZ MZ 301 ETZ ( 1991 ) Simson Schwalbe Simson Simson S50 Simson Simson S51 type Electronic ( 50,60,70) Simson Simson S51 type Enduro ( 50,60,70) Simson Simson SR - scooter(
Our Price 3.29 EUR
Fixing screw of lever - Simson Simson Simson S50 Simson Simson S51 type Electronic ( 50,60,70) Simson Simson S51 type Enduro ( 50,60,70) Simson Simson SR - scooter ( 50,60,70 )
Our Price 0.69 EUR
Float needle AMAL - Simson, Manet Korádo (SUPER MAXI) Note: The float needle is designed for the AMAL carburetor. This is an original spare part. Can be used for: Simson Manet Korádo (SUPER MAXI)
Our Price 5.93 EUR
Float needle valve for carburetor BING - Simson Note: Float needle valve is designed for the BING carburetor. This is an original spare part. Carburetors BING for motorcycles ... BING produces carburettors for motorcycles from 50 to more than 1000 ccm for over 70 years. Experienced engineers optimize the development of carburettors for fuel consumption and exhaust emissions on modern environmental
Our Price 8.63 EUR
Foam plastic of filter 40x30x10, BLACK - UNI
Our Price 3.63 EUR
Foot pump with manometer, single piston Product Features Pressure range 0 - 7 bar Dual head fits both Schrader and Presta valves Sturdy anti-slip pedal and rubber feet Adaptors for airbeds, cycle valves and balls provided Steel construction Technical Data Operating Pressure: 0 - 7 bar / 0 - 100 psi Hose Length: 600 mm Base Dimensions: 280 x 80 mm
Our Price 15.10 EUR
Footrest holder with rubbers (MZA) - Simson Electronic Can be used for: Simson S50, S51, S53, S70, S83 Electronic The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 32.16 EUR
Footrest holder with rubbers (MZA) - Simson Enduro Note.: The footrest holder is extended by approximately 3 cm on the right side. Can be used for: Simson S51, S53, S70 Enduro The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 28.57 EUR
Fork guide, upper (MZA) - Simson S51, S70 Enduro Note.: It is an original spare part. Can be used for: Simson: S51 Enduro, S70 Enduro The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 71.33 EUR
Fork guide, upper, for screwing (MZA) - Simson S50, S51, S70 Note.: The support tube attachment of the fork guide top is for screwing. It is an original spare part. Can be used for: Simson S50, S51, S70 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 33.24 EUR
Frame label (printed) - Simson S50 Note: The type plate is made of aluminum. The type plate is suitable for collectors! Can be used for: Simson S50
Our Price 6.65 EUR
Frame label (printed) - Simson S51 Note: The type plate is made of aluminum. The type plate is suitable for collectors! Can be used for: Simson S51
Our Price 3.60 EUR
Frame label (printed) - Simson S53 Note: The type plate is made of aluminum. The type plate is suitable for collectors! Can be used for: Simson S53
Our Price 10.63 EUR
Frame label (printed) - Simson S70 Note: The type plate is made of aluminum. The type plate is suitable for collectors! Can be used for: Simson S70
Our Price 6.65 EUR
Frame label (printed) - Simson SR50 Note: The type plate is made of aluminum. The type plate is suitable for collectors! Can be used for: Simson SR50
Our Price 6.65 EUR
Frame label (printed) - Simson SR80 Note: The type plate is made of aluminum. The type plate is suitable for collectors! Can be used for: Simson SR50
Our Price 6.65 EUR
Front fork tubes 29,65mm (MZA) - Simson S50, S51, S70 Electronic Note: Diameter 29,65 mm, length 537 mm Can be used for: Simson S50, S51, S70 Electronic The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 96.30 EUR
Front fork tubes 29,65mm (MZA) - Simson S51, S70 (Enduro), SR50, SR80 Note: Diameter 29,65 mm, length 594 mm Can be used for: Simson SR50, SR80 Simson S51 Enduro, S53 Enduro, S70 Enduro The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 85.70 EUR
Front forks 16 "(disc brake), set (MZA) - Simson S51, S53, S70 Note: The forks are designed for 16" front wheels with disc brake. The forks are complete and intended for installation. it is not necessary to fill with oil. This is the original spare part. Diameter of supporting tubes: 29,95 mm Oil capacity per telescope: 120 ml SAE 5 Color: metallic silver Set includes: complete right fork complete
Our Price 212.14 EUR
Front forks 16 "(drum brake), set (MZA) - Simson S51, S53, S70 Note: The forks are designed for 16" front wheels with drum brake with possible conversion to a disc brake with brackets included. The original variant for the drum brake without the drum brake holders is not available. The forks are complete and intended for installation. it is not necessary to fill with oil. This is the original
Our Price 212.14 EUR
STOCK
Front light casing (MZA) - Simson SR50, SR80 Note: This is an original spare part. Can be used for: Simson SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 23.24 EUR
Fuel filter (paper insert), ROUND (small) - UNI
Our Price 1.30 EUR
Fuel filter of carburetor BING - Simson, Manet Korádo Note: Fuel filter is designed for the BING carburetor. This is an original spare part. Can be used for: Simson Manet korádo Carburetors BING for motorcycles ... BING produces carburettors for motorcycles from 50 to more than 1000 ccm for over 70 years. Experienced engineers optimize the development of carburettors for fuel consumption and
Our Price 11.68 EUR
Fuel filter with magnet (paper insert), ROUND (big) - UNI Note: The fuel filter includes a magnet for capturing corrosion particles.
Our Price 1.65 EUR
Fuel tank - Simson S51, S70 Note.: Fuel tank is primed with gray paint. The tank is designed for Simson S51 and S70, but can also be used for the S50. Can be used for: Simson S50, S51 S70
Our Price 71.86 EUR
Fuel tank cap (MZA) - Simson Note: The fuel tank cap includes a rubber seal. Can be used for: Simson S50, S51, S70, SR50, SR80, SR2, Star SR4-2/1, KR50, Schwalbe KR51/1, Schwalbe KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 8.09 EUR
Fuel tank cap (TWN) - Simson Note: The fuel tank cap includes a rubber seal. Can be used for: Simson S50, S51, S70, SR50, SR80, SR2, Star SR4-2/1, KR50, Schwalbe KR51/1, Schwalbe KR51/2
Our Price 5.21 EUR
Fuel tank cap (type E) "1:50 MIXTURE" (MZA) - Simson Note: Polished aluminum fuel tank cap with a diameter of 40 mm (E40) for Simson motorcycles. The fuel tank cap includes a rubber seal. The cap is imprinted with the inscription "1:50 MIXTURE". Can be used for: Simson S50, S51, S70, SR50, SR80, SR2, Star SR4-2/1, KR50, Schwalbe KR51/1, Schwalbe KR51/2 The product of the MZA, which is the
Our Price 16.41 EUR
STOCK
Fuel tank cap (type F) "1:50 MIX" (MZA) - Simson Note: Polished aluminum fuel tank cap with a diameter of 40 mm (E40) for Simson motorcycles. The fuel tank cap includes a rubber seal. The cap is imprinted with the inscription "1:50 MIX". Can be used for: Simson S50, S51, S70, SR50, SR80, SR2, Star SR4-2/1, KR50, Schwalbe KR51/1, Schwalbe KR51/2 The product of the MZA, which is the exclusive
Our Price 16.41 EUR
STOCK
Fuel tank cap with lock (TWN) - Simson Can be used for: Simson
Our Price 12.40 EUR
Fuel tank sieve, 40 mm (MZA) - Simson, MZ ETZ Note: The strainer is designed for all Simson and MZ models with a 40 mm hole in the tank. This is an original spare part. Can be used for: Simson, MZ ETZ The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 3.95 EUR
Fuel valve (MZA) - Simson S50, S51, S53, S70, S83 Note: This is an original spare part from EHR company (supplier MZA). The fuel valve is complete. Can be used for: Simson S50, S51, S53, S70, S83 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 9.53 EUR
Fuel valve (MZA) - Simson SR50, SR80 Note: This is an original spare part from EHR company (supplier MZA). The fuel valve is complete. Can be used for: Simson SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 13.84 EUR
Fuel valve (TWN) - Simson S50, S51, S53, S70, S83 Can be used for: Simson S50, S51, S53, S70, S83
Our Price 9.00 EUR
Fuel valve (TWN) - Simson SR50, SR80 Can be used for: Simson SR50, SR80
Our Price 10.44 EUR
Fuse of clutch basket nut (MZA) - Simson Can be used for: Simson S50, S51, S70, S53, SR50, KR51, SR4-2/3/4 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 1.09 EUR
Fuse of damper needle - Simson S51 Simson Simson S51 type Electronic ( 50,60,70) Simson Simson S51 type Enduro ( 50,60,70) Simson Simson SR - scooter ( 50,60,70 )
Our Price 0.35 EUR
Fuse of exhaust nut (MZA) - Simson Can be used for: Simson The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 1.65 EUR
Fuse of rear shock absorber, springy - Simson
Our Price 1.47 EUR
Fuse of speedometer drive (MZA) - Simson Can be used: Simson The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 0.96 EUR
Fuse of sprocket wheel driver (MZA) - Simson S50, KR51/1 Star Can be used: Simson S50, KR51/1 Star The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 1.30 EUR
Fuse of sprocket wheel driver (MZA) - Simson S51, S53, S70, SR50, KR51/2 Can be used: Simson S51, S53, S70, S83, SR50, SR80, SD50, KR51, Sperber The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 1.62 EUR
Gasket of carburettor – insulating-Simson.
Our Price 0.35 EUR
