Introduction » Parts SIMSON
Spare parts SIMSON
Type S50, S51 Enduro/Elektronik, S70
- Accessories
- Bowdens & Rods
- Carburettor
- Cylinder-Crank mechanism
- Wheels-Brakes
- Engine-Bearings-Seals
- Fuel tank
- Front fork-Steering
- Gears / Shifting
- Frame-Stand-Footrests
- Handlebars
- Seats
- Clutch
- Lighting
- Exhaust muffler with knee
- Rear shocks
- Suction
- Ignition-Electrical
Disc spring of clutch 1,5 mm (MZA) - Simson S51, S53, SR50 Note.: The disc spring is 1,5 mm thick. Can be used: Simson S51, S53, SR50 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 13.12 EUR
Disc spring of clutch 1,6 mm (MZA) - Simson S70, S83, SR80 Note.: The disc spring is 1,6 mm thick. Can be used: Simson S70, S83, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 10.63 EUR
Disc spring of clutch 1,8 mm SPORT (MZA) - Simson S70, S83, SR80 Note.: The disc spring is 1,8 mm thick. Can be used: Simson S70, S83, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 10.98 EUR
Double button (DE) - Simson, MZ, JAWA, ČZ Note: The double button is for a combination of switches - horn and high beam. Can be used: Simson S51, S53, S70, SR50, SR80 MZ ETZ JAWA 350 ty 634, 638, 639, 640 ČZ typ 488, 487
Our Price 6.29 EUR
Drive shaft, 3-speed (MZA) - Simson Note.: The drive shaft has 9 large holes and 2 small holes. It suitable with 3-speed gearbox. Can be used for: Simson S51, S53, S70, S83, SR50, SR80, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 35.76 EUR
Drive shaft, 4-speed (MZA) - Simson Note.: The drive shaft has 12 large holes and 3 small holes. It suitable with 4-speed gearbox. Can be used for: Simson S51, S53, S70, S83, SR50, SR80, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 44.02 EUR
Drive shaft, 5-speed (MZA) - Simson Note.: The drive shaft has 15 large holes and 3 small holes. It suitable with 5-speed gearbox. Can be used for: Simson S51, S53, S70, S83, SR50, SR80, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 32.22 EUR
Carrier of starter with pin (MZA) - Simson S51, S53, S70, SR Note: It is original spare part. Can be used for: Simson S51, S53, S70, S83, SR50, SR80, SD50, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 21.38 EUR
Voltage regulator Elba 12V 2x21W 2,5A, SEGU (DE) - Simson Note.: The spare part is suitable for SIMSON motorbikes. The product is from PKC GROUP from Germany. This is an original spare part. Can be used: Simson S51, S53, S70, SR50
Our Price 71.86 EUR
Voltage regulator Elba 12V 2x21W 5A (MZA) - Simson Note.: The spare part is suitable for SIMSON motorbikes. The product is from PKC GROUP from Germany. This is an original spare part. Can be used: Simson S51, S53, S70, SR50 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 28.57 EUR
Voltage regulator Elba 6V 2x21W 5A (MZA) - Simson Note.: The spare part is suitable for SIMSON motorbikes. The product is from MZA from Germany. This is an original spare part. Can be used: Simson S51,S70, SR50 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 30.00 EUR
Voltage regulator Elba 6V 2x21W 5A, SEGU (DE) - Simson Note.: The spare part is suitable for SIMSON motorbikes. The product is from PKC GROUP from Germany. This is an original spare part. Can be used: Simson S51,S70, SR50
Our Price 32.22 EUR
STOCK
Electric starter 12V EMZA + PVL, (MZA) - Simson Note: EMZA - electronic simson ignition with stator plate no. 390401 (MZA no. 10245 or 10245-00S) This electric starter (3rd generation) is specially designed for engines M531-M743VAPE with ignition systems EMZA (Electronic ignition) or PVL. The set does not include electrical installation with relay (sold separately). Starter kit is suitable for old
Our Price 268.10 EUR
Electric starter 12V VAPE, (MZA) - Simson Note: This electric starter (3rd generation) is specially designed for engines M531-M743VAPE with ignition systems VAPE, because the starter wheel was adapted to a series of VAPE A70-R3 rotors. The set does not include electrical installation with relay (sold separately). Starter kit is suitable for old and new 50-70cc motor covers M531, M541 and M741. The
Our Price 233.79 EUR
STOCK
A set of cable connectors - 315 pieces 35ks faston male 2,8mm35ks faston male 4,8mm (vodič 0,35–1,5mm2)35ks faston male 6,3mm (vodič 0,75–2,5mm2)35ks faston female 2,8mm35ks faston female 4,8mm (vodič 0,35–1,5mm2)35ks faston female 6,3mm (vodič 0,75–2,5mm2)35ks cover 2,8mm35ks cover 4,8mm35ks cover 6,3mm
Our Price 7.91 EUR
End of bowden cable length 7,5mm diameter of the hole 4 mm
Our Price 0.43 EUR
STOCK
End of bowden cable length 5,4 mm diameter of the hole 2 mm CZ CZ - předválečné (1930-1939) CZ CZ 125 A CZ CZ 125 B CZ CZ 125 T CZ CZ 125 type 453 CZ CZ 125 type 473 - Sport CZ CZ 125 type 476 CZ CZ 125 type 488 CZ CZ 125 type 511 cross CZ CZ 125 type 516 cross CZ CZ 125 type 519 cross CZ CZ 125,150 C CZ CZ 175 rikša type 505 CZ CZ 175 skutr
Our Price 0.27 EUR
End of bowden cable length 5,4mm diameter of the hole 3mm CZ CZ - předválečné (1930-1939) CZ CZ 125 A CZ CZ 125 B CZ CZ 125 T CZ CZ 125 type 453 CZ CZ 125 type 473 - Sport CZ CZ 125 type 476 CZ CZ 125 type 488 CZ CZ 125 type 511 cross CZ CZ 125 type 516 cross CZ CZ 125 type 519 cross CZ CZ 125,150 C CZ CZ 175 rikša type 505 CZ CZ 175 skutr type
Our Price 0.22 EUR
Ending of exhaust-Simson Značka type Simson Schwalbe Simson Simson S 50 Simson Simson S 51 type Electronic ( 50,60,70) Simson Simson S 51 type Enduro ( 50,60,70) Simson Simson SR - skutr ( 50,60,70 ) Simson Star
Our Price 24.43 EUR
Ending of spark plug, interference free (CZ) - UNI
Our Price 1.82 EUR
Engine 50ccm, 4-speed (MZA) - Simson S51, S53, SR50, KR51/2 Note.: This is a new 4-speed 50ccm engine for the Simson motorcycle. The engine was professionally assembled and passed a final exam in the test department of the company MZA in Suhl (Germany). The engine installation Simson using only new parts and original tools. The engine housing was made on a five-axis / precision boring machine. The
Our Price 952.21 EUR
Engine 60ccm, 4-speed (MZA) - Simson S51, S53, SR50, KR51/2 Note.: This is a new 4-speed 60ccm engine for the Simson motorcycle. The engine was professionally assembled and passed a final exam in the test department of the company MZA in Suhl (Germany). The engine installation Simson using only new parts and original tools. The engine housing was made on a five-axis / precision boring machine. The
Our Price 1,041.86 EUR
Engine 70ccm, 4-speed (MZA) - Simson S70, S83, SR80 Note.: This is a new 4-speed 70ccm engine for the Simson motorcycle. The engine was professionally assembled and passed a final exam in the test department of the company MZA in Suhl (Germany). The engine installation Simson using only new parts and original tools. The engine housing was made on a five-axis / precision boring machine. The case is
Our Price 1,077.80 EUR
Engine and frame screws, set (MZA) - Simson S51, S70 Note: It is a set of screws, nuts, rivets and washers. Set suited to the engine, frame, chassis and body parts for Simson S51, S70. The set is divided into 22 foil bags with description (in German languague). Can be used for: Simson S51, S70 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 60.91 EUR
STOCK
Engine block seal, crankcase (MZA) - Simson Note.: Thickness 0,8 mm Can be used: Simson S51, S53, S70, S83, SR50, SR80, SD50, KR51/2, Sperber The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 1.57 EUR
Engine box 50 ccm (Ø46,1), bare (MZA) - Simson S51, S53, SR50, KR51/2 Note: The engine case is for 50 ccm cylinders. The engine box has a hole for 46,1 mm diameter cylinders, with an outer diameter of 45 mm. This is an original spare part. The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 201.41 EUR
STOCK
Engine box 70 ccm (Ø50,1), bare (MZA) - Simson S70, S83, SR80 Note: The engine case is for 70 ccm cylinders. The engine housing has a hole for 50,1 mm diameter cylinders, with an outer diameter of 50 mm. This is an original spare part. The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 183.98 EUR
Engine cover (MZA) - Simson SR50, SR80 Note: This is an original spare part. Can be used for: Simson SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 22.68 EUR
STOCK
Engine oil - MOGUL 2T (100 ml) Mogul 2T is an engine oil intended exclusively for the lubrication of older types of two-stroke petrol engines lubricated with a mixture of oil and petrol. Mixing ratio according to the engine manufacturer's recommendations. 1:25 for 2,5 liters of gasoline 1:33 for 3,3 liters of gasoline 1:40 for 4,0 liters of gasoline 1:50 for 5,0 liters of gasoline Flammable liquid
Our Price 1.80 EUR
Engine oil - MOL Dynamic Sprint 2T Red (1000 ml) MOL Dynamic Sprint 2T Red is a high-performance engine oil with a pre-dilution component, compatible with a catalyst for two-stroke engines with gasoline-oil mixture lubrication and oil injection. This is a replacement for the MOGUL TSF. Especially suitable for all two-stroke engines of motorcycles, garden equipment, chainsaws and also for
Our Price 6.83 EUR
Engine oil - Slovnaft Madit M2T (1000 ml) Engine oil for older, two-stroke passenger vehicles and motorbikes. A traditional lubricant for older, two-stroke gasoline and mixture-lubricated passenger cars and motorbikes, keeping the engine parts clean and preventing electrical arc flash in ignition plugs. Mixing ratio according to the engine manufacturer's recommendations. Flammable liquid IV.
Our Price 6.46 EUR
Engine suspension rubber, KOWALIT (MZA) - Simson S50, S51, S53, S70, S83 Note.: Kowalit was the brand name of a tubular tire produced by "VEB Gummikombinat Thüringen" in Waltershausen. Can be used for: Simson S50, S51, S53, S70, S83 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 4.14 EUR
Spoke safety-clip of piston tenon 14 Jawa 05,20-23 Babetta Simson
Our Price 0.15 EUR
Exhaust cover, BLACK (MZA) - Simson Enduro Can be used for: Simson S51 Enduro, S53 Enduro, S70 Enduro, S83 Enduro The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 17.87 EUR
Exhaust cover, BLACK (TWN) - Simson Enduro Can be used for: Simson S51 Enduro, S53 Enduro, S70 Enduro, S83 Enduro
Our Price 14.22 EUR
STOCK
Exhaust cover, CHROME (MZA) - Simson Enduro Can be used for: Simson S51 Enduro, S53 Enduro, S70 Enduro, S83 Enduro The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 19.69 EUR
STOCK
Exhaust cover, CHROME (TWN) - Simson Enduro Can be used for: Simson S51 Enduro, S53 Enduro, S70 Enduro, S83 Enduro
Our Price 17.88 EUR
Exhaust elbow (MZA) - Simson S51, S70 Electronic Note: The outside diameter of the exhaust knees is 28 mm. Can be used: Simson S51, S53, S70 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 14.74 EUR
Exhaust elbow (MZA) - Simson S51, S70 Enduro Note: The outside diameter of the exhaust knees is 28 mm. Can be used: Simson S51E, S53E, S70E, S83E The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 14.01 EUR
Exhaust elbow (MZA) - Simson SR50, SR80 Can be used: Simson SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 16.71 EUR
Exhaust holder (strut), BLACK (MZA) - Simson S51, S53, S70 Enduro Note: The holder is designed to mounting of rear exhaust for Simson Enduro. Product of German company MZA. Made according to original shapes and dimensions. Can be used: Simson S51, S53, S70 Enduro The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 10.60 EUR
Exhaust holder (strut), BLACK - Simson S51 Electronic Can be used for: Simson S50, S51, S70
Our Price 3.79 EUR
Exhaust holder (strut), CHROME (MZA) - Simson S51, S53, S70 Enduro Note: The holder is designed to mounting of rear exhaust for Simson Enduro. Product of German company MZA. Made according to original shapes and dimensions. Can be used: Simson S51, S53, S70 Enduro The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 13.84 EUR
Exhaust holder (strut), CHROME - Simson S51 Electronic Simson Simson S51 type Electronic ( 50,60,70)
Our Price 4.67 EUR
Exhaust Insert, thermal insulation (MZA) - Simson S51, S70, S53, S83 Enduro Can be used: Simson S51 Enduro, S70 Enduro, S53 Enduro, S83 Enduro The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 1.98 EUR
Exhaust repair nut 33,30 mm (MZA) - Simson Note: The exhaust nut is used to repair the thread on the cylinder. This is the second smaller size of about 33,30 mm. Screw the repair nut onto the damaged thread. Can be used for: Simson S50, S51, S53, S70, SR50, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 6.65 EUR
Exhaust repair nut 33,80 mm (MZA) - Simson Note: The exhaust nut is used to repair the thread on the cylinder. This is the first smaller size of about 33,80 mm. Screw the repair nut onto the damaged thread. Can be used for: Simson S50, S51, S53, S70, SR50, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 6.47 EUR
Exhaust silencer SPORT, BLACK - JAWA 50 20-23, Simson
Our Price 48.68 EUR
Exhaust silencer SPORT, CHROME - JAWA 50 21-23, Simson
Our Price 71.15 EUR
STOCK
Exhaust silincer (MZA) - Simson S50, S51, S70 Electronic Note: The exhaust is complete. The exhaust sleeve is included. The exhaust is made in original dimensions and original quality. The diameter for the exhaust connection with the elbow is 28mm. DIMENSIONS:Overall length: 88cmEnd length: 25.5 cmEnd diameter: 7 cmInlet diameter (knee inlet): 28 mm (standard) Can be used: Simson S50, S51, S70,
Our Price 59.83 EUR
Exhaust silincer (MZA) - Simson S51, S70 Enduro Note: The exhaust is complete. The exhaust sleeve is included. The exhaust is made in original dimensions and original quality. The diameter for the exhaust connection with the elbow is 28mm. Can be used: Simson S51E, S70E The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 61.80 EUR
Exhaust silincer (MZA) - Simson SR50, SR80, KR51/2 Note: The exhaust is complete. The exhaust sleeve is included. The exhaust is made in original dimensions and original quality. The diameter for the exhaust connection with the elbow is 28mm. DIMENSIONS:Overall length: 88cmEnd length: 25.5 cmEnd diameter: 7 cmInlet diameter (knee inlet): 28 mm (standard) Can be used: Simson SR50, SR80, KR51/2
Our Price 62.89 EUR
Extruder of piston pin (10-18 mm) - UNI ČZ ČZ - prewar (1930-1939) ČZ ČZ 125 A ČZ ČZ 125 B ČZ ČZ 125 T ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 125 type 511 cross ČZ ČZ 125 type 516 cross ČZ ČZ 125 type 519 cross ČZ ČZ 125,150 C ČZ ČZ 175 rikša type 505 ČZ ČZ 175 skutr type 501 ČZ ČZ 175
Our Price 16.16 EUR
Fender strut, FRONT (MZA) - Simson S50,S51,S70,S83 Note: Designed for telescopic fork with enduro fender installation. This is an original spare part. Can be used for: Simson S50, S51, S70, S83 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 21.38 EUR
Fender, FRONT (BLACK) - Simson Can be used for: Simson S50, S51, S70
Our Price 27.13 EUR
Fender, FRONT (CHROME) - Babetta 210, 225 Can be used for: Babetta 210, 225
Our Price 23.35 EUR
STOCK
