We use cookies to give you the best customer experience possible. If you continue to use our web, we will assume that you agree to the use of such cookies.
Seal of float chamber for carburetor AMAL - Simson Note: The seal is designed for the float chamber. The seal is designed for the AMAL carburetor. This is an original spare part.
Seal of float chamber for carburetor BING - Simson, Manet Korado Note: The seal is designed for the float chamber. The seal is designed for the BING carburetor. This is an original spare part. Can be used for: Simson Manet korádo Carburetors BING for motorcycles ... BING produces carburettors for motorcycles from 50 to more than 1000 ccm for over 70 years. Experienced engineers optimize the
Seal of float chamber for carburetor BVF (16N/19N) - Simson Note: The seal is designed for the float chamber. The seal is designed for the BVF (16N/19N) carburetor. This is an original spare part.
Seal of float chamber for carburetor BVF (16N/19N), RUBBER - Simson Note: The seal is designed for the float chamber. The seal is designed for the BVF (16N/19N) carburetor. This is an original spare part.
Seal of fuel valve 16x3 mm, 4 holes (MZA) - Simson Note: For EHR petrol valves. Can be used for: Simson S50, S51, S53, S70, S83 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Seal of fuel valve 17,7x3 mm, 4 holes (MZA) - Simson SR, MZ Note: For EHR petrol valves. Can be used for: Simson SR50, SR80, Schwalbe KR51, Schwalbe KR51/2 MZ ETZ 125, 150, 250, 251, 301 MZ TS 250, 250/1 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Sealing ring for M14 oil drain plug (MZA) - Simson S51, S70, SR50, KR51/2 Note: The sealing ring is for the M14 oil drain plug. Dimensions A14x18x1,5. Can be used for: Simson S51, S70, SR50, SR80, Schwalbe KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Seat BLACK, complete (MZA) - S50, S51, S70 Electronic Note: The seat is complete (sheet, foam, seat cover) Can be used: S50, S51, S70 Electronic The product of the MZA, which is the exclusive holder of the SIMSON brand.
Seat BLACK, complete (MZA) - S50, S51, S70 Enduro Note: The seat is complete (sheet, foam, seat cover) Can be used: S50, S51, S70 Enduro The product of the MZA, which is the exclusive holder of the SIMSON brand.
Seat BLACK-BLUE, complete (MZA) - S50, S51, S70 Enduro Note: The seat is complete (sheet, foam, seat cover) Can be used: S50, S51, S70 Enduro The product of the MZA, which is the exclusive holder of the SIMSON brand.
Seat BLACK-RED, complete (MZA) - S50, S51, S70 Enduro Note: The seat is complete (sheet, foam, seat cover) Can be used: S50, S51, S70 Enduro The product of the MZA, which is the exclusive holder of the SIMSON brand.
Seat BLACK-YELLOW, complete (MZA) - S50, S51, S70 Enduro Note: The seat is complete (sheet, foam, seat cover) Can be used: S50, S51, S70 Enduro The product of the MZA, which is the exclusive holder of the SIMSON brand.
Seat cover, BLACK (MZA) - S50, S51, S70 Electronic Can be used: S50, S51, S70 Electronic The product of the MZA, which is the exclusive holder of the SIMSON brand.
Seat cover, BLACK (MZA) - S50, S51, S70 Enduro Can be used: S50, S51, S70 Enduro The product of the MZA, which is the exclusive holder of the SIMSON brand.
Seat cover, BLACK (MZA) - Simson SR50, SR80 Note: Black seat cover with white SIMSON writing. Can be used: Simson SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Seat cover, BLACK-BLUE (MZA) - S50, S51, S70 Enduro Can be used: S50, S51, S70 Enduro The product of the MZA, which is the exclusive holder of the SIMSON brand.
Seat cover, BLACK-RED (MZA) - S50, S51, S70 Enduro Can be used: S50, S51, S70 Enduro The product of the MZA, which is the exclusive holder of the SIMSON brand.
Seat cover, BLACK-YELLOW (MZA) - S50, S51, S70 Enduro Can be used: S50, S51, S70 Enduro The product of the MZA, which is the exclusive holder of the SIMSON brand.
Seat foam (MZA) - Simson S50, S51, S70 Electronic Can be used for: S50, S51, S70 Electronic The product of the MZA, which is the exclusive holder of the SIMSON brand.
Securing of carburetor needle BVF 16N1 - Simson Note: Securing is designed for carburetor needle of the BVF carburetor. This is an original spare part.
Set for aluminum and other nonferrous metals, type C (100 mm) Used for polishing HARDLY oxidized aluminum and other non-ferrous metals. For each type of paste, we recommend your own disc. Do not confuse disks that are used for sanding with discs that you use to polish!!! The paste is applied to the spinning wheel and gently applying to the disc for about 4sec. The application time affects the
Set for aluminum and other nonferrous metals, type C (130 mm) Used for polishing HARDLY oxidized aluminum and other non-ferrous metals. For each type of paste, we recommend your own disc. Do not confuse disks that are used for sanding with discs that you use to polish!!! The paste is applied to the spinning wheel and gently applying to the disc for about 4sec. The application time affects the
Set of main nozzles for carburetor BVF (72-80) - Simson Note: Set of main nozzles for tuning BVF carburetor. This is an original spare part. Set includes: main nozzle 72 main nozzle 73 main nozzle 74 main nozzle 75 main nozzle 76 main nozzle 78 main nozzle 80
Set of rubbers and cuffs (8pcs), BLUE (MZA) - Simson Note.: The set of rubber parts includes 8 pieces: rubbers of handlebars (right + left), front footrest rubbers, rear footrests and telescopic cuffs. Rear footrest is galvanized. All rubber parts in the set are blue. Can be used: Simson S50, S51, S70, S83 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Set of winkers, FRONT (MZA) - Simson, MZ Note.: Product of the German company MZA. The product conforms to the E homologation. The mounting is intended for turn signal holders with a diameter of 10 mm. The approved operating voltage is 12V. Set includes: round direction indicator, left 1 pcs round direction indicator, right 1pcs indicator lamp gasket 3 pcs Bulbs are not included! Can be used:
Set of winkers, REAR (MZA) - Simson, MZ Note.: Product of the German company MZA. The product conforms to the E homologation. The mounting is intended for turn signal holders with a diameter of 10 mm. The approved operating voltage is 12V. Set includes: round direction indicators 2 pcs indicator lamp gasket 3 pcs Bulbs are not included! Can be used: Simson S50, S51, S70, SR50, SR80 MZ ETZ: 125,
Set of winkers, SQUARE (MZA) - Simson, MZ Note.: Product of the German company MZA. The product conforms to the E homologation. The mounting is intended for turn signal holders with a diameter of 15 mm. The approved operating voltage is 12V. Can be used front or rear. Set includes: Round direction indicators 2 pcs Indicator seals Bulbs are not included! Can be used: Simson MZ The product of the
Set screw of bowden M6x30 - slicing through Brand Type ČZ ČZ 125 A ČZ ČZ 125 B ČZ ČZ 125 T ČZ ČZ 125 typ 453 ČZ ČZ 125 typ 473 - Sport ČZ ČZ 125,150 C ČZ ČZ 175 rikša typ 505 ČZ ČZ 175 skutr typ 501 - dvouvýfuk ČZ ČZ 175 skutr typ 502 - jednovýfuk ČZ ČZ 175 typ 450 ČZ ČZ 175 typ 470 - Sport ČZ ČZ 250 typ 455 ČZ ČZ 250 typ 471 - dvouválec ČZ
Shaft of shift, 3. a 4.-speed (MZA) - Simson S51, S53, S70, S83, SR50, SR80, KR51/2 Note .: Designed for 3. and 4.-speed gearbox. It is original spare part. Can be used for: Simson S51, S53, S70, S83, SR50, SR80, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Shaft of shift, 5.-speed (MZA) - Simson S51, S53, S70, S83, SR50, SR80, KR51/2 Note .: Designed for five-speed gearbox. It is original spare part. Can be used for: Simson S51, S53, S70, S83, SR50, SR80, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Shift drum (MZA) - Simson S51, S53, S70, S83, SR50, SR80, KR51/2 Note: The shift drum is designed for engines with a four-speed transmission. Can be used for: Simson S51, S53, S70, S83, SR50, SR80, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Shifting clutch (MZA) - Simson S51, S53, S70, S83, SR50, SR80, KR51/2 Note: This is an original spare part. Can be used for: Simson S51, S53, S70, S83, SR50, SR80, SD50, Schwalbe KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Shift lever, inner (MZA) - Simson Note: It is original spare part. Can be used for: Simson S51, S53, S70, S83, SR50, SR80, SD50, Schwalbe KR51/2, Sperber MS 50 Sperber 25/50/80 Beach Racer The product of the MZA, which is the exclusive holder of the SIMSON brand.
Shock absorber oil - MOL Hydro SA 15 (1000 ml) Operating fluid for hydraulic shock absorbers for vehicles. Excellent hydraulic oil of viscosity class ISO VG 15 for equipment where performance level ISO-L-LM (DIN HLP) is required. Product features Low low temperature viscosity / Ensures proper operation of hydraulic controls even in winter Compatible with common sealing materials / Lower
Shock absorbers, rear (set 2pcs) CHROME (MZA) - Simson Note: Set includes 2pcs of shock absorbers. DIMENSIONS length (between the centers of mounting holes): 365 mm mounting holes (sleeve): internal diameter - 8 mm, length - 20 mm outer diameter of the spring: 54 mm spring diameter: 7 mm TECHNICAL SPECIFICATIONS spring: chromed hardness adjustment: 5 steps Can be used: Simson S50, S51, S53, S70,
Shock absorbers, rear (set 2pcs) CHROME (TWN) - Simson Enduro Note: Set includes 2pcs of shock absorbers. Oil-spring rear shock absorbers for Simson with manual adjustment of hardness, the ability to set the hardness for one person (soft) or for two people (hard) without the use of tools. Factory mounted in Enduro and Comfort versions, can also be fitted to other versions S51 and S70. DIMENSIONS
Side cover of suction, LEFT (MZA) - Simson S50, S51, S70 Note: The side cover is for the left side where is the ignition. This is an original spare part. The product of the MZA, which is the exclusive holder of the SIMSON brand.
Side cover of suction, RIGHT (MZA) - Simson S50, S51, S70 Note: The side cover is for the right side where is the air filter. This is an original spare part. The product of the MZA, which is the exclusive holder of the SIMSON brand.
Side cover of suction, RIGHT (MZA) - Simson S51, S70 Enduro Note: The side cover is for the right side where is the air filter. The side cover is primed. Side cover has recesses for increased exhaust Enduro. This is an original spare part. The product of the MZA, which is the exclusive holder of the SIMSON brand.
Side stand 16" (1 spring), to footrest support (MZA), BLACK - Simson S50, S51, S70 Note: The side stand for Simson for 16-inch wheels is equipped with 1 springs. The attachment is made to the footrest support. Can be used for: Simson S50, S51, S53, S70, S83 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Side stand 16" (2 springs), to footrest support (MZA), BLACK - Simson S50, S51, S70 Note: The side stand for Simson for 16-inch wheels is equipped with 2 springs. The attachment is made to the footrest support. Can be used for: Simson S50, S51, S53, S70, S83 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Sifter of fuel valve - Simson, MZ Can be used for: Simson S50, S51, S70, SR50, SR80, SR1, SR2, KR51/2, Star SR4-2, ETZ 125, 150, 250, 251, 301 TS 250, 250/1 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Silentblock of exhaust silincer (MZA) - Simson SR50, SR80 Can be used for: Simson SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Silentblock of fuel tank, FRONT (MZA) - Simson Can be used for: Simson S51, S50, S70 The product of the MZA, which is the exclusive holder of the SIMSON brand.
SILICHROM EX - Chrome cleaning and polishing paste (120g) Paste for cleaning and polishing chrome, metals and brass. It allows you to effectively clean and polish oxidized, corrosion-damaged chrome and metal parts of cars and motorcycles.