Introduction » New arrivals
New arrivals
Fender, REAR - Babetta 210, 225 Can be used for: Babetta 210, 225
Our Price 26.23 EUR
Filter of fuel valve (MZA) - Simson, MZ Note: This is an original spare part from EHR company (supplier MZA). Can be used for: Simson S50, S51, S70, SR50, SR80, SR2 MZ The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 3.63 EUR
Float needle valve for carburetor BING - Simson Note: Float needle valve is designed for the BING carburetor. This is an original spare part. Carburetors BING for motorcycles ... BING produces carburettors for motorcycles from 50 to more than 1000 ccm for over 70 years. Experienced engineers optimize the development of carburettors for fuel consumption and exhaust emissions on modern environmental
Our Price 8.63 EUR
Floor of front cover, RIGHT - JAWA 50 05,20 Can be used for: JAWA 50 type 05 JAWA 50 type 20
Our Price 36.66 EUR
Flywheel - Babetta 206, 207, 208 Can be used for: Babetta type 206, 207, 208
Our Price 19.26 EUR
Foot pump with manometer, single piston Product Features Pressure range 0 - 7 bar Dual head fits both Schrader and Presta valves Sturdy anti-slip pedal and rubber feet Adaptors for airbeds, cycle valves and balls provided Steel construction Technical Data Operating Pressure: 0 - 7 bar / 0 - 100 psi Hose Length: 600 mm Base Dimensions: 280 x 80 mm
Our Price 15.10 EUR
Footrest holder for welding - JAWA-ČZ 355-356 Can be used for: JAWA-ČZ 125 type 355 JAWA-ČZ 175 type 356
Our Price 9.70 EUR
STOCK
Footrest holder with rubbers (MZA) - Simson Electronic Can be used for: Simson S50, S51, S53, S70, S83 Electronic The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 32.16 EUR
Footrest holder with rubbers (MZA) - Simson Enduro Note.: The footrest holder is extended by approximately 3 cm on the right side. Can be used for: Simson S51, S53, S70 Enduro The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 28.57 EUR
Fork guide, upper (MZA) - Simson S51, S70 Enduro Note.: It is an original spare part. Can be used for: Simson: S51 Enduro, S70 Enduro The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 71.33 EUR
Fork of gear shift- Stadion, Jawetta Can be used for: Jawetta, Stadion
Our Price 25.00 EUR
Frame label (etched), POVAŽSKÉ STROJÁRNE - Babetta 228 Note: The type plate is made of aluminum. The type plate is suitable for collectors! Can be used for: Babetta 228
Our Price 4.33 EUR
Frame label (printed) - Simson S50 Note: The type plate is made of aluminum. The type plate is suitable for collectors! Can be used for: Simson S50
Our Price 6.65 EUR
Frame label (printed) - Simson S51 Note: The type plate is made of aluminum. The type plate is suitable for collectors! Can be used for: Simson S51
Our Price 3.60 EUR
Frame label (printed) - Simson S53 Note: The type plate is made of aluminum. The type plate is suitable for collectors! Can be used for: Simson S53
Our Price 10.63 EUR
Frame label (printed) - Simson S70 Note: The type plate is made of aluminum. The type plate is suitable for collectors! Can be used for: Simson S70
Our Price 6.65 EUR
Frame label (printed) - Simson SR50 Note: The type plate is made of aluminum. The type plate is suitable for collectors! Can be used for: Simson SR50
Our Price 6.65 EUR
Frame label (printed) - Simson SR80 Note: The type plate is made of aluminum. The type plate is suitable for collectors! Can be used for: Simson SR50
Our Price 6.65 EUR
Frame label (printed), BLACK - ČZ 125 B,T Note.: Printed frame label in Czech languague.
Our Price 2.94 EUR
Frame label (printed), BLACK - Ogar Note.: Printed frame label in Czech languague.
Our Price 2.94 EUR
Frame label (printed), BLACK - Stadion S23 Note.: Printed frame label in English languague.
Our Price 2.94 EUR
Frame label (printed), KOLÁROVO - Babetta Note: The type plate is made of aluminum. The type plate is suitable for collectors! Can be used for: Babetta 210 Babetta 225
Our Price 3.60 EUR
Frame label (printed), POVAŽSKÉ STROJÁRNE - Babetta 207 Note: The type plate is made of aluminum. The type plate is suitable for collectors! Can be used for: Babetta 207
Our Price 3.79 EUR
Frame label (printed), POVAŽSKÉ STROJÁRNE - Babetta 210 Note: The type plate is made of aluminum. The type plate is suitable for collectors! Can be used for: Babetta 210
Our Price 4.13 EUR
Frame label (printed), RED - Stadion S23 Note.: Printed frame label in English languague.
Our Price 2.94 EUR
Frame label (printed), ZVL - Babetta Note: The type plate is made of aluminum. The type plate is suitable for collectors! Can be used for: Babetta 207 Babetta 210 Babetta 225
Our Price 3.41 EUR
Front brake cable sleeve for welding on fender - JAWA, ČZ
Our Price 3.12 EUR
Front brake cable sleeve for welding on fender, pressed - JAWA, ČZ
Our Price 2.34 EUR
Front brake disc (JAWA) - JAWA 350 OHC Note: This is an original part JAWA Moto spol s r. o. Can be used for: JAWA 350 OHC type 845 JAWA 350 OHC type 845 Special JAWA 350 OHC type 845 Scrambler
Our Price 38.18 EUR
Front brake disc 300mm, floating (JAWA) - JAWA 350 640 (newer version) Note.: Disc diameter 300 mm Can be used for: JAWA 350 640 (newer version with brake disc diameter 300mm)
Our Price 57.44 EUR
Front carrier (CZ) - JAWA 50 555 Note: Assembly instructions are included. Can be used for: JAWA 50 type 555
Our Price 27.67 EUR
Front cover doors "Breast" - JAWA 50 555 Deluxe It is not possible to apply a registered discount to this product. Note: New production according to the original. The covers are supplied in the base color. Can be used for: JAWA 50 type 555 Deluxe (with rheumatic covers)
Our Price 89.48 EUR
Front cover doors (left side carburettor) - JAWA 50 550 It is not possible to apply a registered discount to this product. Note: New production according to the original. The covers are supplied in the base color. Can be used for: JAWA 50 type 550 (1st type)
Our Price 89.48 EUR
Front cover doors (right side carburettor) - JAWA 50 550-555 It is not possible to apply a registered discount to this product. Note: New production according to the original. The covers are supplied in the base color. Can be used for: JAWA 50 type 550 (right side carburettor) JAWA 50 type 555 (right side carburettor)
Our Price 89.48 EUR
Front cover with doors (left side carburettor) - JAWA 50 550 It is not possible to apply a registered discount to this product. Note: New production according to the original. The covers are supplied in the base color. Can be used for: JAWA 50 type 550 (1st type)
Our Price 168.52 EUR
Front cover with doors (right side carburettor) - JAWA 50 550-555 It is not possible to apply a registered discount to this product. Note: New production according to the original. The covers are supplied in the base color. Can be used for: JAWA 50 type 550 (right side carburettor) JAWA 50 type 555 (right side carburettor)
Our Price 168.52 EUR
STOCK
Front cover with doors (right side carburettor) - JAWA 50 555 Deluxe It is not possible to apply a registered discount to this product. Note: New production according to the original. The covers are supplied in the base color. Can be used for: JAWA 50 type 555 Deluxe (with rheumatic covers)
Our Price 168.52 EUR
Front footrest holder (67mm), knurling - ČZ 477
Our Price 1.82 EUR
Front footrest with catch on the brake cable - JAWA 350 634 Can be used for: JAWA 350 type 634
Our Price 19.87 EUR
STOCK
Front fork spring cup, lower - JAWA 350 634-639, ČZ 487 Can be used for: JAWA 350 type 634 JAWA 350 type 638 JAWA 350 type 639 ČZ 175 type 487
Our Price 5.03 EUR
Front fork spring cup, upper - JAWA 350 634-639 Cam be used for: JAWA 350 type 634 JAWA 350 type 638 JAWA 350 type 639
Our Price 2.70 EUR
Front fork spring suspension (CZ) - Stadion S1 Can be used for: Stadion S1 (1st type)
Our Price 213.08 EUR
Front fork tube (SK) - JAWA 350 638-640 Note.: Front fork tube made in Slovakia. This is a new production. Can be used for: JAWA 350 type 638, 639, 640
Our Price 55.00 EUR
Front fork tube with bushings, upper - JAWA 50 550 Note: The tube is the same for the left and right side. Can be used for: JAWA 50 type 550
Our Price 20.84 EUR
Front fork tubes 29,65mm (MZA) - Simson S50, S51, S70 Electronic Note: Diameter 29,65 mm, length 537 mm Can be used for: Simson S50, S51, S70 Electronic The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 96.30 EUR
Front fork tubes 29,65mm (MZA) - Simson S51, S70 (Enduro), SR50, SR80 Note: Diameter 29,65 mm, length 594 mm Can be used for: Simson SR50, SR80 Simson S51 Enduro, S53 Enduro, S70 Enduro The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 85.70 EUR
Front forks 16 "(disc brake), set (MZA) - Simson S51, S53, S70 Note: The forks are designed for 16" front wheels with disc brake. The forks are complete and intended for installation. it is not necessary to fill with oil. This is the original spare part. Diameter of supporting tubes: 29,95 mm Oil capacity per telescope: 120 ml SAE 5 Color: metallic silver Set includes: complete right fork complete
Our Price 212.14 EUR
Front forks 16 "(drum brake), set (MZA) - Simson S51, S53, S70 Note: The forks are designed for 16" front wheels with drum brake with possible conversion to a disc brake with brackets included. The original variant for the drum brake without the drum brake holders is not available. The forks are complete and intended for installation. it is not necessary to fill with oil. This is the original
Our Price 212.14 EUR
STOCK
Front forks, complete (CZ) - JAWA 50 555, 05,20-23 (Mustang) Lze použít pro: JAWA 50 type 555 JAWA 50 type 05 JAWA 50 type 20 JAWA 50 type 21 JAWA 50 type 23 (Mustang)
Our Price 64.86 EUR
Front forks, complete - JAWA 50 23 Mustang Note.: The registered discount cannot be applied to the goods. Not intended for wholesale sale. Can be used for: JAWA 50 type 23 Mustang
Our Price 192.24 EUR
STOCK
Front light bulb socket, SHEET (set) - Stadion, Jawetta Can be used for: Jawa 50 type551 Jawetta, since 1959 Jawa 50 type 551 Jawetta Sport, since 1960 Stadion S11 Stadion S22 Stadion S23
Our Price 12.75 EUR
Front light, complete (SK) - Stadion S22-S23, Jawetta Note: The light is complete including bulbs. Can be used for: Jawa 50 typ 551 Jawetta, since 1959 Jawa 50 typ 551 Jawetta Sport, since 1960 Stadion S22 Stadion S23
Our Price 124.15 EUR
Front seat bracket for welding to the frame (locking with a lock) - JAWA Panelka, Sport, Californian Note.: Without surface treatment. For welding to the frame. Can be used for: JAWA Panelka JAWA Sport JAWA Californian
Our Price 20.67 EUR
Front shock absorber spring catch, long with rod - JAWA Pérák Lze použít pro: Jawa 250 type 10,11 Pérák, year 1946-7 Jawa 250 type 11 Pérák, year 1948-9 Jawa 250 type 11 Pérák, year 1950-4 Jawa 350 type 18 Pérák, year 1948-55 Jawa Ogar 350 type 12, year 1948
Our Price 13.57 EUR
Front wheel hub, diameter 160mm - JAWA Pérák Can be used for: Jawa 250 type 10,11 Pérák, year 1946-7 Jawa 250 type 11 Pérák, year 1948-9 Jawa 250 type 11 Pérák, year 1950-4 Jawa 350 type 18 Pérák, year 1948-55 Jawa Ogar 350 type 12, year 1948
Our Price 262.85 EUR
Fuel filter of carburetor BING - Simson, Manet Korádo Note: Fuel filter is designed for the BING carburetor. This is an original spare part. Can be used for: Simson Manet korádo Carburetors BING for motorcycles ... BING produces carburettors for motorcycles from 50 to more than 1000 ccm for over 70 years. Experienced engineers optimize the development of carburettors for fuel consumption and
Our Price 11.68 EUR
Fuel filter with magnet (paper insert), ROUND (big) - UNI Note: The fuel filter includes a magnet for capturing corrosion particles.
Our Price 1.65 EUR
Fuel tank (replica) - JAWA Panelka, Sport Note.: Replica of fuel tank, new chrome, without internal surface treatment Can be used for: Jawa 250 type 559 Panelka, since 1962 Jawa 250 type 592, since 1969 Jawa 250 type 590 Sport, since 1965 Jawa 350 type 360 Panelka, since 1964 Jawa 350 type 361 Sport, since 1965 Jawa,ČZ 250 type 353 Kývačka since 1954 Jawa,ČZ 350 type 354 Kývačka since 1954
Our Price 431.48 EUR
STOCK
Fuel tank - JAWA 50 05,20-21 Note: This is a new product. The tank is painted (gray lacquer). Thread for fuel valve M14 x 1.5 Can be used for: JAWA 50 type 05, 20, 21
Our Price 68.06 EUR
Fuel tank cap (MZA) - Simson Note: The fuel tank cap includes a rubber seal. Can be used for: Simson S50, S51, S70, SR50, SR80, SR2, Star SR4-2/1, KR50, Schwalbe KR51/1, Schwalbe KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 8.09 EUR
Fuel tank cap (TWN) - Simson Note: The fuel tank cap includes a rubber seal. Can be used for: Simson S50, S51, S70, SR50, SR80, SR2, Star SR4-2/1, KR50, Schwalbe KR51/1, Schwalbe KR51/2
Our Price 5.21 EUR
Fuel tank cap (type E) "1:50 MIXTURE" (MZA) - Simson Note: Polished aluminum fuel tank cap with a diameter of 40 mm (E40) for Simson motorcycles. The fuel tank cap includes a rubber seal. The cap is imprinted with the inscription "1:50 MIXTURE". Can be used for: Simson S50, S51, S70, SR50, SR80, SR2, Star SR4-2/1, KR50, Schwalbe KR51/1, Schwalbe KR51/2 The product of the MZA, which is the
Our Price 16.41 EUR
STOCK
Fuel tank cap (type F) "1:50 MIX" (MZA) - Simson Note: Polished aluminum fuel tank cap with a diameter of 40 mm (E40) for Simson motorcycles. The fuel tank cap includes a rubber seal. The cap is imprinted with the inscription "1:50 MIX". Can be used for: Simson S50, S51, S70, SR50, SR80, SR2, Star SR4-2/1, KR50, Schwalbe KR51/1, Schwalbe KR51/2 The product of the MZA, which is the exclusive
Our Price 16.41 EUR
STOCK
Fuel tank cap - Stadion S22, S23 Parameters: exact replica according to the original - identical characteristics identical plastic to the original - with the same technological process of production vents same color as unused original fuel tank cap Can be used for: Stadion type S22, S23
Our Price 20.16 EUR
Fuel tank cap with lock (TWN) - Simson Can be used for: Simson
Our Price 12.40 EUR
Fuel tank cap, CHROME - Stadion S11 Can be used for: Stadion S11
Our Price 6.83 EUR
Fuel tank cap, YELLOW - Stadion S11 Can be used for: Stadion S11
Our Price 6.11 EUR
Fuel tank covers L+R, CHROME - JAWA Panelka, Sport Note: This is a set of 2 pcs. Can be used for: JAWA 250 type 559 (Panelka) JAWA 250 type 590 (Sport) JAWA 350 type 360 (Panelka) JAWA 350 type 361 (Sport)
Our Price 86.43 EUR
Fuel tank knee pads, set L+R - JAWA Californian, Panelka Can be used for: JAWA 350 Californian type 362 JAWA 250 Panelka type 592 JAWA 350 Panelka type 360
Our Price 30.67 EUR
Fuel tank neck, sheet metal - JAWA, ČZ Note: Fuel tank neck for welding on the fuel tank. Can be used for: Jawa 250 type 10,11 Pérák, year 1946-7 Jawa 250 type 11 Pérák, year 1948-9 Jawa 250 type 11 Pérák, year 1950-4 Jawa 350 type 18 Pérák, year 1948-55 Jawa Ogar 350 type 12, rok 1948 Jawa 250 type 559 Panelka, since 1962 Jawa 250 type 592, since 1969 Jawa 250 type 590 Sport, since 1965 Jawa 350
Our Price 31.26 EUR
