Introduction » Parts JAWA 250/350 PANEL./KÝV. » Engine-Bearings-Seals
Motor-Gufera-Ložiska-Těsnění - Díly JAWA 250/350 Panelka/Kývačka
Pattern steel stamp 6mm, numbers 0-9 (red set) Note: Professional punches for metal, for castings - a set of number punches.The red and blue die sets differ in the font of the numbers. The red set has wider numbers, the blue set, on the other hand, narrower, see photo. Set includes: numbers ( 0-9 )Size: 6 mmSquare: 9.6mmPunch length: 68mm Phosphated, hardened, nickel plated.Hardness: 59-63 HRC
Our Price 10.07 EUR
PAULIN - Gasket maker (85g) -30°C to +180°C Universal high-elastic putty based on acrylonitrile rubber, which dries quickly and vulcanizes to a solid mass similar to rubber. It serves as a seal or a seal replacement. It is especially suitable for sealing gears, gearboxes, differentials, wedge boxes, water pumps, etc. Paulin Sealant resists oils, diesel, lyes, acids and coolants at temperature
Our Price 2.70 EUR
Seal of carburetor flange - JAWA, ČZ Can be used for: ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 175 rikša type 505 ČZ ČZ 175 skutr type 501 ČZ ČZ 175 skutr type 502 ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ 250 type 455 ČZ ČZ 250 type 471 ČZ ČZ 250 type 475 ČZ ČZ 350 type 472 JAWA - ČZ Jawa - ČZ
Our Price 0.18 EUR
Seal of carburetor flange, thermal - JAWA, ČZ Can be used for: ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 175 rikša type 505 ČZ ČZ 175 skutr type 501 ČZ ČZ 175 skutr type 502 ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ 250 type 455 ČZ ČZ 250 type 471 ČZ ČZ 250 type 475 - Sport ČZ ČZ 350 type 472 JAWA
Our Price 0.90 EUR
Sealing wristband of starting lever - JAWA, ČZ ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 175 rikša type 505 ČZ ČZ 175 skutr type 501 - two exhausts ČZ ČZ 175 skutr type 502 - one exhasut ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ 250 type 455 ČZ ČZ 250 type 471 - two exhausts ČZ ČZ 250 type 475 - Sport
Our Price 0.27 EUR
Set of engine mounting bolts (M8x1x46) - JAWA, ČZ Note Made according to the original. The set contains 6 pcs of screws, 12 pcs of washers and 6 pcs of nuts. Screw design OK14, M8x1x46.
Our Price 14.26 EUR
STOCK
Simmering 25x62x8 (MVQ), SILICONE NOTE.: (MVQ) SILICONE Operating temperature: – 60 to +210 °C Resistant to mineral oils and lubricants It is not resistant to water, acids, synthetic automotive brake fluids Can be used for: ČZ ČZ 250 type 471 ČZ ČZ 350 type 472 JAWA 250 Bizon type 623 JAWA 250 type 11 (Pérák) JAWA 250 type 353 (Kývačka) JAWA 250 type 559 (Panelka) JAWA 250 type 590 (Sport) JAWA
Our Price 1.30 EUR
Simmering 25x62x8 - JAWA ČZ ČZ 250 type 471 - two cylinders ČZ ČZ 350 type 472 - two cylinders JAWA 250 Bizon type 623 JAWA 250 type 11 (Pérák) JAWA 250 type 353 (Kývačka) JAWA 250 type 559 (Panelka) JAWA 250 type 590 (Sport) JAWA 350 Bizon type 633 JAWA 350 type 18 (Pérák) JAWA 350 type 354 (Kývačka) JAWA 350 type 360 (Panelka) JAWA 350 type 361 (Sport) JAWA 350 type 362 (Californian) JAWA 350
Our Price 1.07 EUR
Simmering 30x52x8 (MVQ), SILICONE NOTE.: (MVQ) SILICONE Operating temperature: – 60 to +210 °C Resistant to mineral oils and lubricants It is not resistant to water, acids, synthetic automotive brake fluids Can be used for: JAWA 250 Bizon type 623 JAWA 250 type 11 (Pérák) JAWA 250 type 353 (Kývačka) JAWA 250 type 559 (Panelka) JAWA 250 type 590 (Sport) JAWA 350 Bizon type 633 JAWA 350 type 18
Our Price 1.30 EUR
STOCK
Speedometer drive (N-N) 1030mm - JAWA, ČZ DIAMETERS: Drive ends: square Bowden cable length: 1030 mm Cable end design: NUT - NUT Aluminum nuts Can be used for: JAWA JAWA-ČZ ČZ
Our Price 6.65 EUR
Speedometer drive (N-N) 765mm - JAWA, ČZ DIAMETERS: Drive ends: square Bowden cable length: 765 mm Cable end design: NUT - NUT Aluminum nuts Can be used for: JAWA JAWA-ČZ ČZ
Our Price 6.65 EUR
Speedometer drive (N-N) 810mm - JAWA, ČZ DIAMETERS: Drive ends: square Bowden cable length: 765 mm Cable end design: NUT - NUT (N-N) Aluminum nuts Can be used for: JAWA JAWA-ČZ ČZ
Our Price 6.65 EUR
Speedometer drive (N-N) 950mm - JAWA, ČZ DIAMETERS: Drive ends: square Bowden cable length: 950 mm Cable end design: NUT - NUT Aluminum nuts Can be used for: JAWA JAWA-ČZ ČZ
Our Price 6.65 EUR
Speedometer drive (N-S) 1000mm - JAWA, ČZ DIAMETERS: Drive ends: square Bowden cable length: 1000 mm Cable end design: NUT - SOCKET (N-S) Aluminum nut Can be used for: JAWA JAWA-ČZ ČZ
Our Price 6.48 EUR
Speedometer drive (N-S) 1030mm - JAWA, ČZ DIAMETERS: Drive ends: square Bowden cable length: 1030 mm Cable end design: NUT - SOCKET Aluminum nut Can be used for: JAWA JAWA-ČZ ČZ
Our Price 6.83 EUR
Speedometer drive (N-S) 1300mm - JAWA, ČZ DIAMETERS: Drive ends: square Bowden cable length: 1300 mm Cable end design: NUT - SOCKET (N-S) Aluminum nut Can be used for: JAWA JAWA-ČZ ČZ
Our Price 6.48 EUR
Speedometer drive (N-S) 810mm - JAWA, ČZ DIAMETERS: Drive ends: square Bowden cable length: 810 mm Cable end design: NUT - SOCKET (N-S) Aluminum nut Can be used for: JAWA JAWA-ČZ ČZ
Our Price 6.83 EUR
Speedometer drive (N-S) 900mm - JAWA, ČZ DIAMETERS: Drive ends: square Bowden cable length: 900 mm Cable end design: NUT - SOCKET Aluminum nut Can be used for: JAWA JAWA-ČZ ČZ
Our Price 6.48 EUR
Speedometer drive (N-S) 950mm - JAWA, ČZ DIAMETERS: Drive ends: square Bowden cable length: 950 mm Cable end design: NUT - SOCKET (N-S) Aluminum nut Can be used for: JAWA JAWA-ČZ ČZ
Our Price 6.65 EUR
Speedometer drive pinion 11t. (SK) - JAWA 250 Panelka, Kývačka (2nd type) Note: Tachometer drive pinion suitable for JAWA 250 Panelka and 250 Kývačka 2.Typ engines - with external outlet for the tachometer. Total length 220mm. Can be used for: Jawa 250 type 559 Panelka Jawa 250 type 592 Jawa 250 type 590 Sport Jawa,ČZ 250 type 353 Kývačka Jawa 250 type 553,579 Libeňák Velorex 250, 350
Our Price 17.06 EUR
Speedometer drive pinion 11t., outlet 8mm (SK) - JAWA 250 Pérák, Kývačka Note: Tachometer drive pinion suitable for JAWA 250 Pérák and 250 Kývačka. Total length 180mm. Can be used for: Jawa 250 type 10,11 Pérák, year 1946-7 Jawa 250 type 11 Pérák, year 1948-9 Jawa 250 type 11 Pérák, year 1950-4 Jawa 250 type 353 Kývačka since 1954 Jawa 250 type 553,579 Libeňák Velorex 250, 350
Our Price 23.53 EUR
Speedometer drive pinion 12t. - JAWA 350 Kývačka, Panelka, 634 Can be used for: JAWA 350 type 634 JAWA 350 Californian JAWA 350 type 354 (Kývačka) JAWA 350 type 360 (Panelka) JAWA 350 type 361 (Sport)
Our Price 26.77 EUR
Speedometer drive pinion 14t., outlet 6mm (178mm) - JAWA, ČZ Note: It is an original unused part. Can be used for: JAWA-ČZ 125 type 355 Kývačka since 1956 JAWA-ČZ 175 type 356 Kývačka since 1956 ČZ 125 type 453, since 196- ČZ 125 type 473, since 196- ČZ 175 type 450, since 196- ČZ 175 type 470, since 196- ČZ 250 type 455, since 196- ČZ 250 type 475, since 196- ČZ 125 type 476 ČZ 175 type 477 ČZ
Our Price 17.78 EUR
Spring for carburetor cover - set 2 pcs Perak250
Our Price 3.63 EUR
STOCK
Spring for carburetor cover - set 2 pcs Perak350
Our Price 3.63 EUR
Stopper of oil, filling ,STEEL M14x1,5 - Jawa/ČZ
Our Price 1.30 EUR
Stopper of oil, filling, AL POLISHED M14x1,5 - Jawa/ČZ
Our Price 2.15 EUR
ZOLLEX - Gasket maker (85g), BLACK (260℃) ZOLLEX Black gasket maker is suitable for gaskets used in high temperature applications up to 260°C. Safe for oxygen sensor equipped vehicles. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. DIRECTIONS: Remove old gaskets
Our Price 3.78 EUR
ZOLLEX - Gasket maker (85g), CLEAR (260℃) ZOLLEX Clear gasket maker is suitable for gaskets used in high temperature applications up to 260°C. Safe for oxygen sensor equipped vehicles. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. DIRECTIONS: Remove old gaskets
Our Price 3.78 EUR
ZOLLEX - Gasket maker (85g), GRAY (350℃) ZOLLEX Gray gasket maker is suitable for gaskets used in high temperature applications up to 350°C. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. DIRECTIONS: Remove old gaskets and clean all surfaces thoroughly. Remove cap,
Our Price 3.78 EUR
ZOLLEX - Gasket maker (85g), RED (350℃) ZOLLEX Red gasket maker is suitable for gaskets used in high temperature applications up to 350°C. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. DIRECTIONS: Remove old gaskets and clean all surfaces thoroughly. Remove cap,
Our Price 3.78 EUR
