Introduction » Parts SIMSON » Engine-Bearings-Seals
Parts SIMSON / Engine-Bearings-Seals
Simmering 20x35x7 (MVQ), SILICONE NOTE.: (MVQ) SILICONE Operating temperature: – 60 to +210 °C Resistant to mineral oils and lubricants It is not resistant to water, acids, synthetic automotive brake fluids
Our Price 0.96 EUR
Simmering 20x47x7 (NBR) NOTE.: (NBR) ACRYLONITRILE BUTADIENE RUBBER Operating temperature: –30 to +110°C Resistant to mineral oils and lubricants, water and many other chemicals, hydrocarbon fuels, etc. It is not resistant to synthetic automotive brake fluids
Our Price 1.12 EUR
Simmering of FRONT telescope 30x40x7 - Simson
Our Price 0.69 EUR
Simmerings of engine, set (MZA) - Simson S51 S53, S70, SR50, SR80, KR51/2 Note: Set contains 4pcs. Seals are two-layer (two inner sealing surfaces). 20x47x7 (crankshaft right)20x35x7 (crankshaft left)22x35x7 (clutch cover)20x30x7 (drive shaft) Can be used for: Simson S51 S53, S70, SR50, SR80, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 6.29 EUR
Speedometer / rev-counter drive pinion housing (MZA) - Simson S51, S70, SR50 Note: This is an original spare part. Can be used: Simson S51, S70, SR50, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 4.14 EUR
Speedometer drive gear for 14t. wheel (MZA) - Simson S51, S70, SR50, KR51/2 Note: The speedometer drive gear is complete. The parts are made of metal and plastic. Speedometer drive is designed for 14t. wheel. This is an original spare part. Can be used: Simson S51, S70, SR50, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 25.70 EUR
Speedometer drive gear for 15t. wheel (MZA) - Simson S51, S70, SR50, KR51/2 Note: The speedometer drive gear is complete. The parts are made of metal and plastic. Speedometer drive is designed for 15t. wheel. This is an original spare part. Can be used: Simson S51, S70, SR50, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 24.98 EUR
Speedometer drive gear for 16t. wheel (MZA) - Simson S51, S70, SR50, KR51/2 Note: The speedometer drive gear is complete. The parts are made of metal and plastic. Speedometer drive is designed for 16t. wheel. This is an original spare part. Can be used: Simson S51, S70, SR50, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 26.41 EUR
Speedometer pinion 10t. (MZA) - Simson S51, S70, SR50, KR51/2 Note: The speedometer drive gear is complete. The parts are made of metal and plastic. Speedometer drive is designed for 14t. wheel. This is an original spare part. Can be used: Simson S51, S70, SR50, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 7.91 EUR
ZOLLEX - Gasket maker (85g), BLACK (260℃) ZOLLEX Black gasket maker is suitable for gaskets used in high temperature applications up to 260°C. Safe for oxygen sensor equipped vehicles. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. DIRECTIONS: Remove old gaskets
Our Price 3.78 EUR
ZOLLEX - Gasket maker (85g), CLEAR (260℃) ZOLLEX Clear gasket maker is suitable for gaskets used in high temperature applications up to 260°C. Safe for oxygen sensor equipped vehicles. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. DIRECTIONS: Remove old gaskets
Our Price 3.78 EUR
ZOLLEX - Gasket maker (85g), GRAY (350℃) ZOLLEX Gray gasket maker is suitable for gaskets used in high temperature applications up to 350°C. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. DIRECTIONS: Remove old gaskets and clean all surfaces thoroughly. Remove cap,
Our Price 3.78 EUR
ZOLLEX - Gasket maker (85g), RED (350℃) ZOLLEX Red gasket maker is suitable for gaskets used in high temperature applications up to 350°C. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. DIRECTIONS: Remove old gaskets and clean all surfaces thoroughly. Remove cap,
Our Price 3.78 EUR
