Introduction » New arrivals
New arrivals
Plexiglass holders - JAWA, ČZ It is not possible to apply a registered discount for this product. Can be used for: Jawa 250 type 559 Panelka, since 1962 Jawa 250 type 592, since 1969 Jawa 350 type 360 Panelka, since 1964 Jawa,ČZ 125 type 351 since 1954 Jawa,ČZ 150 type 352 since 1954 Jawa,ČZ 125 type 355 Kývačka since 1956 Jawa,ČZ 175 type 356 Kývačka since 1956 Jawa,ČZ 250 type 353 Kývačka since
Our Price 172.30 EUR
Plexiglass shield, low - Velorex 562 Can be used for: Velorex 562
Our Price 35.73 EUR
Pliers for brake shoe springs - UNI Made specifically for mounting and dismounting brake shoe return springs. Asymmetrically shaped pliers, where one is a support and the other with a hook serves to capture the spring. On one handle there is a special head for releasing brake shoe fuses with application on practically all hydraulic brakes. They can also be used to mount/dismount springs from pins.
Our Price 8.99 EUR
Poweroff switch (JAWA) - JAWA 350 OHC Can be used for: JAWA 350 OHC type 845 Original product of JAWA Moto spol s r. o.
Our Price 17.07 EUR
Pressure ring of clutch (MZA) - Simson S51, S70, SR50, KR51/2 Note.: It is an original spare part. Can be used: Simson S51, S53, S70, S83, SR50, SR80, KR51/2, Sperber The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 14.26 EUR
PRESTO - Paint scratch remover (kit) Note: The set contains: 25 g scratch remover - REPAIR (tube),25 g scratch remover - FINISH (tube) 1 polishing cloth, 2 special sand papers The DEKRA-approved presto Scratch Remover removes scratches, minor scrapes and paint traces from paintwork (also metallic) quickly and reliably.With two different special polishes, both minor and deep scratches can be
Our Price 12.94 EUR
Primary wheel 22t. (CZ) - JAWA 250 Kývačka, Panelka, Pérák Can be used for: JAWA 250 Kývačka JAWA 250 Panelka JAWA 250 Pérák
Our Price 24.25 EUR
Card game Quartet - Veteran motorcyclec Note: The cards contain technical information about motorcycles
Our Price 3.07 EUR
Rear brake pedal, ZINC - JAWA 350 634-640 Can be used for: JAWA 350 type 634 JAWA 350 type 638 TS JAWA 350 type 639 TS JAWA 350 type 640 JAWA 350 type 640 Tramp JAWA 350 type 693 (640 Chopper)
Our Price 9.40 EUR
Rear brake rod (JAWA) - JAWA 350 OHC Can be used for: JAWA 350 OHC type 845 Original product of JAWA Moto spol s r. o.
Our Price 10.60 EUR
Rear brake rod, bare 500mm (M6), CHROME - JAWA 500 OHC 01 Can be used for: JAWA 500 OHC type 01 (1955-1956)
Our Price 6.11 EUR
Rear brake shield, CHROME (CZ) - JAWA 500 OHC 00,01 Can be used for: JAWA 500 OHC type 00 JAWA 500 OHC type 01
Our Price 121.81 EUR
Rear brake switch with bracket for conversion (MZA) - Simson S50, S51, S70 Note: The brake light switch set with mounting bracket allows for easy maintenance, as it replaces the original rear wheel mount, which is subject to high wear. With this set, time-consuming maintenance and adjustment work are a thing of the past. Thanks to more precise adjustment and better response, you will gain greater
Our Price 14.20 EUR
Rear footrest holder for welded, bare - JAWA, ČZ Can be used for: ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 250 type 455 ČZ ČZ 250 type 475 - Sport JAWA - ČZ Jawa - ČZ 125 type 351 JAWA - ČZ Jawa - ČZ 125 type 355 JAWA - ČZ Jawa - ČZ 150 type 352 JAWA - ČZ Jawa - ČZ 175 type 356 JAWA 250 type 353 (Kývačka) JAWA 250 type 559 (Panelka) JAWA
Our Price 3.95 EUR
Rear footrest holder for welded, complete - JAWA, ČZ Can be used for: ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 250 type 455 ČZ ČZ 250 type 475 - Sport JAWA - ČZ Jawa - ČZ 125 type 351 JAWA - ČZ Jawa - ČZ 125 type 355 JAWA - ČZ Jawa - ČZ 150 type 352 JAWA - ČZ Jawa - ČZ 175 type 356 JAWA 250 type 353 (Kývačka) JAWA 250 type 559 (Panelka)
Our Price 17.61 EUR
Rear footrest with bracket, LEFT (JAWA) - JAWA 350 OHC Can be used for: JAWA 350 OHC type 845 Original product of JAWA Moto spol s r. o.
Our Price 38.80 EUR
Rear footrest with bracket, RIGHT (JAWA) - JAWA 350 OHC Can be used for: JAWA 350 OHC type 845 Original product of JAWA Moto spol s r. o.
Our Price 38.80 EUR
Rear footrest, BLACK - ČZ 125/150 Can be used for: ČZ 125 B since 1947 ČZ 125 T year 1947-1950 ČZ 125 C year 1950-1952 ČZ 150 C year 1950-1953
Our Price 6.46 EUR
Rear footrests, complete (MZA) - MZ Note.: Set of 2 pcs of rear footrests. Thread M10. Can be used for: MZ ETZ 125, 150, 250, 251, 301 MZ TS 250/1 MZ ES 175/2, 250/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 17.07 EUR
Rear footrests, complete (MZA) - Simson Note.: Set of 2 pcs of rear footrests. Can be used for: Simson S50, S51, S53, S70, S83, SC-050, SR4-2, SR4-3, SR4-4, TS050, KR51/1, KR51/2, MS50 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 10.60 EUR
Rear handle reinforcement - JAWA 50 20,21 Can be used for: JAWA 50 type 20 JAWA 50 type 21
Our Price 1.26 EUR
Rear handle, for welding - JAWA 50 550 Can be used for: JAWA 50 type 550
Our Price 6.13 EUR
Rear lamp (JAWA) - JAWA 350 OHC Can be used for: JAWA 350 OHC type 845 Original product of JAWA Moto spol s r. o.
Our Price 22.28 EUR
STOCK
Rear light (type JUTE), complete (JAWA) - JAWA 350 638-640 Note.: The last type of rear light used by JAWA Moto spol s.r.o. for motorcycles JAWA 350 type 640 and JAWA 350 634 RETRO. The light is complete with bulb socket and bulb. Can be used for: JAWA 350 638 TS JAWA 350 639 TS JAWA 350 640 JAWA 350 634 Retro
Our Price 34.13 EUR
Rear light and reflector holder (original) - JAWA 350 634, ČZ 476,477,471,472 Note: This is an original unused part. The product may bear traces of storage. Can be used for: JAWA 350 type 634 ČZ type 476,477 ČZ type 471,472
Our Price 10.06 EUR
Rear light base plate, complete - Stadion S11,S22 Can be used for: Stadion S11 Stadion S22
Our Price 9.52 EUR
Rear light bulb holder - Babetta 207 Can be used for: Babetta type 207
Our Price 21.74 EUR
Rear light cover, for original light - Babetta 207 Can be used for: Babetta type 207
Our Price 10.06 EUR
STOCK
Rear light holder - Babetta 207 Can be used for: Babetta type 207
Our Price 9.88 EUR
Rear light, BLACK (1946-1950) - JAWA Pérák, ČZ 125/150 Note: The light consists of a light cover, a bulb holder and a rubber under the light. The bulb is not included. Can be used for: Jawa 250 type 10,11 Pérák, year 1946-7 Jawa 250 type 11 Pérák, year 1948-9 Jawa 250 type 11 Pérák, year 1950-4 Jawa 350 type 18 Pérák, year 1948-55 Jawa Ogar 350 type 12, year 1948 ČZ 125 B since 1947 ČZ 125 T year
Our Price 47.43 EUR
Rear rosette cover, set of 2pcs (JAWA) - JAWA 350 634-640 Note: The set consists of outer and inner cover. Can be used for: JAWA 350 type 634 JAWA 350 type 638 TS JAWA 350 type 639 TS JAWA 350 type 640
Our Price 39.20 EUR
Rear shock absorber holder, LEFT - JAWA 50 20-21,23 (Mustang) Can be used for: JAWA 50 type 20 JAWA 50 type 21 JAWA 50 type 23 (Mustang)
Our Price 1.80 EUR
Rear shock absorber holder, RIGHT - JAWA 50 20-21,23 (Mustang) Can be used for: JAWA 50 type 20 JAWA 50 type 21 JAWA 50 type 23 (Mustang)
Our Price 1.80 EUR
Rear shock absorber mounting bolts M7, ZINC (set 4pcs) - JAWA Pérák, ČZ 125/150C Can be used for: JAWA 250/350 Pérák ČZ 125/150C
Our Price 9.17 EUR
Rear shock absorber piston stop - Stadion S22, S23 Can be used: Stadion S22 Stadion S23 Stop - washer of the piston of the rear shock absorber - telescope for the Stadion S22 and S23 moped. This is a precise molding of high-quality polyamide. Made exactly according to the unused original part. Two stops are needed for the moped - one for each shock absorber. This is a product made in the Czech
Our Price 1.08 EUR
Rear shock absorber springs, REINFORCED - Stadion S22, S23 Reinforced springs of the rear shock absorber - telescope for the Stadion S22 and S23 moped, which are intended for drivers over 90 kg. The springs are made of the highest quality steel alloyed with silicon and chrome, which is directly intended for shock absorbers and for direct contact with oils. This material is used for the production
Our Price 21.92 EUR
Rear shock absorber stop - Babeta inner diameter 10 mm outer diameter 16,5 mm length 35mm
Our Price 0.75 EUR
Rear shock absorber stop - Stadion S22, S23 Rear shock absorber stop - telescope for moped Stadion S22 and S23. This is a very precise casting of extremely high-quality rubber with ideal hardness, which is intended specifically for stops and is resistant to various oils, fuels and solvents. It corresponds exactly to the original in dimensions, manufactured using a professional CNC mold and
Our Price 2.16 EUR
Rear telescope covers (4pcs) - JAWA 50 05,20-23 Note.: Set includes: Rear telescope cover - upper (2pcs) Rear telescope cover - bottom (2pcs) Can be used for: JAWA 50 type 05, 20, 21, 23
Our Price 38.81 EUR
Rear telescope spring, raw - JAWA 50 05,20-23 Can be used for: JAWA 50 type 05 JAWA 50 type 20 JAWA 50 type 21 JAWA 50 type 23 (Mustang)
Our Price 4.14 EUR
Rear wheel driver 31t. with bearing (MZA) - Simson SR50, SR80 Note: Complete rear wheel driver with bearing 6203 C3 and seger protection. Can be used for: Simson SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 27.49 EUR
Rear wheel driver 34t. with bearing (MZA) - Simson S50, S51, S53, S70, S83, KR51 Note: Complete rear wheel driver with bearing 6203 2RS and seger protection. Can be used for: Simson S50, S51, S53, S70, S83, KR51/1, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 24.98 EUR
STOCK
Rear wheel hub dust cover, complete - JAWA Pérák Wheel duster consists of a tin bowl for the felt (2 pcs) and a felt between the sheets (1 pc) Can be used for: JAWA Pérák
Our Price 4.68 EUR
Rear wheel hub, CHROME (CZ) - JAWA Pérák (Komunista) Can be used for: JAWA 250 Pérák (Komunista) JAWA 350 Pérák (Komunista)
Our Price 143.55 EUR
Rear wheel hub, CHROME (CZ) - JAWA Pérák (Zbrojovka) Can be used for: JAWA 250 Pérák (Zbrojovka) JAWA 350 Pérák (Zbrojovka)
Our Price 129.18 EUR
Reduction for the inflator tube from MOTO to VELO - UNI
Our Price 0.90 EUR
Reflector 60mm (round), RED, self-adhesive - UNI Note.: Diameter 60 mm
Our Price 1.25 EUR
Reflector 60mm (round), ORANGE, for screw - UNI Note.: Diameter 61 mm
Our Price 0.72 EUR
Reflector 60mm (round), RED, for screw - UNI Note.: Diameter 61 mm
Our Price 0.72 EUR
Reflector to rubber, PLASTIC - JAWA, ČZ Note.: Diameter 55 mm Can be used for: ČZ ČZ 125 A ČZ ČZ 125 B ČZ ČZ 125 T ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 125,150 C ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 250 type 455 ČZ ČZ 250 type 475 - Sport JAWA - ČZ Jawa - ČZ 125 type 351 JAWA - ČZ Jawa - ČZ 125 type 355 JAWA - ČZ Jawa - ČZ 150 type 352 JAWA - ČZ Jawa - ČZ 175 type
Our Price 1.65 EUR
STOCK
Reflector with screw (51mm), RED - UNI
Our Price 4.33 EUR
STOCK
Reflector with screw (51mm), WHITE - UNI
Our Price 4.33 EUR
Reflector with screw (59mm), RED - UNI
Our Price 1.26 EUR
STOCK
Regulator (JAWA) - JAWA 350 OHC Can be used for: JAWA 350 OHC type 845 Original product of JAWA Moto spol s r. o.
Our Price 77.08 EUR
Reinforcement inserto of front shock absorbers - JAWA 350 638-640 Can be used for: JAWA 350 type 638, 639, 640
Our Price 0.78 EUR
Repair kit of carburettor AMAL (MZA) - Simson Note: Repair kit of carburettors AMAL. This is an original spare part. Set includes: main nozzles 70, 75, 80, 85, 90, 95 idle nozzles 25, 30, 35 needles: A1 (thin), A2 (thick) The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 46.53 EUR
Repair kit of carburettor BVF 16N1-11 (MZA) - Simson Note: Repair kit of carburettors BVF 16N1-11. This is an original spare part. Set includes: float valve main nozzle 72 idle nozzle 35 starting nozzle 50 idle adjusting screw float axle
Our Price 10.24 EUR
Repair kit of carburettor BVF 16N1-8 (MZA) - Simson Note: Repair kit of carburettors BVF 16N1-8. This is an original spare part. Set includes: float valve main nozzle 70 idle nozzle 35 starting nozzle 50 idle adjusting screw float axle
Our Price 8.80 EUR
Repair kit of carburettor BVF 16N3-1/2/4 (MZA / BVF) - Simson Note: Repair kit of carburettors BVF 16N3-1, 16N3-2 and 16N3-4. This is an original spare part. Set includes: float valve main nozzle holder main nozzle 70 idle nozzle 35 starting nozzle 60 idle adjusting screw float axle The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik
Our Price 10.24 EUR
Repair kit of carburettor BVF 16N3-3/5 (MZA / BVF) - Simson Note: Repair kit of carburettors BVF 16N3-3 and 16N3-5. This is an original spare part. Set includes: float valve main nozzle holder main nozzle 72 idle nozzle 35 starting nozzle 60 idle adjusting screw float axle The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH,
Our Price 8.09 EUR
Repair kit of carburettor choke BVF - Simson Note: Repair kit of choke for carburettors BVF. This is an original spare part. Set includes: choke choke rubber choke spring choke body choke adjusting screw The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 8.62 EUR
Repair kit of carburettor slide BVF 16N1-11 (MZA / BVF) - SimsonNote: Carburettor slide repair kit BVF 16N1-11. This is an original spare part.Set includes: carburettor slide 21 mm carburetor slide spring needle 10 (length - 43.5 mm) securing the needle The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62,
Our Price 7.37 EUR
Repair kit of carburettor slide BVF 16N1-8 (MZA) - Simson Note: Carburettor slide repair kit BVF 16N1-8. This is an original spare part. Set includes: carburettor slide 21 mm carburetor slide spring needle 09 (length - 46 mm) securing the needle Product from the German distributor MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr.
Our Price 5.93 EUR
Repair kit of carburettor slide BVF 16N3 (MZA) - Simson Note: Carburettor slide repair kit BVF 16N3. This is an original spare part. Set includes: carburettor slide 18 mm carburetor slide spring needle case of needle securing the needle
Our Price 8.27 EUR
Repair kit of front forks, 3,2mm (MZA) - Simson Note: Repair kit of front forks with hardened springs 3,2 mm for Simson motorcycle. Set includes: spring 3,2 mm (standard) / 2 pcs oil Addinol SAE 5 80 ml / 1 pc front telescope cuff / 2 pcs plastic cap of telescope cuffs / 2 pcs simmering 30x40x7 / 2 pcs bottom bar seal / 2 pcs upper screw seal / 2 pcs circlip W-25 / 2 pcs Can be used for: Simson
Our Price 28.03 EUR
Repair kit of front forks, 3,4mm (MZA) - Simson Note: Repair kit of front forks with hardened springs 3,4 mm for Simson motorcycle. Set includes: spring 3,4 mm / 2 pcs oil Addinol SAE 5 80 ml / 1 pc front telescope cuff / 2 pcs plastic cap of telescope cuffs / 2 pcs simmering 30x40x7 / 2 pcs bottom bar seal / 2 pcs upper screw seal / 2 pcs circlip W-25 / 2 pcs Can be used for: Simson S50, S51,
Our Price 30.73 EUR
Repair kit of speedometer (120km/h) - JAWA 90, 23 Mustang (1.type) Can be used for: Jawa 50 type 23 Mustang, since 1969 Jawa 90 type 30,31 Cross, since 1968 Jawa 90 type 36,37 Roadster, since 1968
Our Price 29.50 EUR
Repair kit of speedometer 60km/h, BLACK DIAL - Babetta Can be used for: Babetta 207 Babetta 210
Our Price 10.62 EUR
Repair kit of speedometer 80km/h, BLACK DIAL - Babetta Can be used for: Babetta 207 Babetta 210
Our Price 10.62 EUR
Repair kit of speedometer 80km/h, WHITE DIAL - Babetta Can be used for: Babetta 207 Babetta 210
Our Price 10.95 EUR
Return spring of clutch shaft - Manet Korádo Can be used for: Manet Korádo
Our Price 0.96 EUR
STOCK
Return spring of shift (MZA) - Simson S50, KR51/1, SR4-2, SR4-3, SR4-4 Note: It is original spare part. Can be used for: Simson S50, KR51/1, SR4-2, SR4-3, SR4-4 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 1.80 EUR
