Introduction » New arrivals
New arrivals
Holders of exhausts (set of 4pcs), ZINC - JAWA Californian Can be used for: Jawa 350 type 362 Californian, since 1969
Our Price 21.25 EUR
Holders of headlamp L+R (EU) - ČZ 350 472 Can be used for: ČZ 350 472
Our Price 97.00 EUR
STOCK
Holders of rubber seat, machined castings - ČZ 125/150 Can be used for: ČZ 125 T rok 1947-1950 ČZ 125 C rok 1950-1952 ČZ 150 C rok 1950-1953 ČZ 150 C Rikša, rok 1951-
Our Price 38.00 EUR
Hook of luggage carrier tape - Simson Can be used for: Simson
Our Price 1.82 EUR
Horn 12V (JAWA) - JAWA 350 OHC Can be used for: JAWA 350 OHC type 845 JAWA 350 OHC type 845 Special JAWA 350 OHC type 845 Scrambler Original product of JAWA Moto spol s r. o.
Our Price 7.01 EUR
Horn 12V - JAWA 350 638-640 Can be used for: JAWA 350 type 638 TS JAWA 350 type 639 TS JAWA 350 type 640 JAWA 350 type 640 Tramp JAWA 350 type 693 (640 Chopper)
Our Price 14.55 EUR
Horn 12V, CHROME (MZA) - Simson The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 12.94 EUR
Hose end of fuel valve (MZA) - Simson Note: This is an original spare part from EHR company (supplier MZA). Can be used for: Simson The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 4.31 EUR
Housing of speedometer drive pinion - JAWA 350 Kývačka, Panelka Lze použít pro: JAWA 350 typ 360 (Panelka) JAWA 350 typ 354 (Kývačka) JAWA 350 typ 361 (Sport)
Our Price 8.81 EUR
STOCK
Idle nozzle 40 - JAWA 50 05, 20-23, Stadion S22,S23 Can be used for: Jawa 50 type 05 Jawa 50 type 20 Jawa 50 type 21 Jawa 50 type 23 Mustang Stadion S22 Stadion S23
Our Price 2.70 EUR
Idling nozzle M4x0,7 (45) - JAWA 350 638-640 Can be used for: JAWA 350 type 638 TS JAWA 350 type 639 TS JAWA 350 type 640 JAWA 350 type 640 Tramp JAWA 350 type 693 (640 Chopper)
Our Price 1.12 EUR
Idling nozzle M4x0,7 (50) - JAWA 350 638-640 Can be used for: JAWA 350 type 638 TS JAWA 350 type 639 TS JAWA 350 type 640 JAWA 350 type 640 Tramp JAWA 350 type 693 (640 Chopper)
Our Price 1.12 EUR
Ignition cam felt - ČZ 125/150 Can be used for: ČZ 125 B ČZ 125 T ČZ 125/150 C
Our Price 4.13 EUR
Ignition coil (JAWA) - JAWA 350 OHC Can be used for: JAWA 350 OHC type 845 Original product of JAWA Moto spol s r. o.
Our Price 116.78 EUR
Ignition coil 6V 20 + 10W, BIG - Babetta Can be used for: Babetta
Our Price 9.70 EUR
STOCK
Ignition coil Z55-1 (VAPE) - JAWA 50 Pionýr, Stadion Ignition coil with integrated electronic switch, for capacitive ignition systems with charging coil and starter winding on alternator stator. Includes one high voltage terminal. It is part of the set SZ86, SZ87 and SZ93.
Our Price 44.19 EUR
Ignition cover (ventilated), TUNING (CZ) - JAWA 50 20,21,23 Can be used for: JAWA 50 type 20 JAWA 50 type 21 JAWA 50 type 23 (Mustang) Ribbed for better air circulation and ignition cooling Especially suitable for races where you drive at full speed for a long time The ribbed style is chosen so that it can suck in air and at the same time not collect all the dust and mud The cap can be mounted
Our Price 13.30 EUR
Ignition cover, RED - Babetta Can be used for: Babetta type 207 Babetta type 210 Babetta type 225
Our Price 2.70 EUR
Ignition switch key 8629.4, BLACK (MZA) - MZ ETZ Can be used for: MZ ETZ125, ETZ150, ETZ250, ETZ251 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 3.23 EUR
Ignition terminal block - JAWA 50 550-555 Can be used: JAWA 50 550 JAWA 50 555
Our Price 3.30 EUR
Indicator light - ČZ 476-477, 471-472 Can be used for: ČZ 175 typ 477 ČZ 125 typ 476 ČZ 250 typ 471 ČZ 350 typ 472
Our Price 7.01 EUR
Indicator lights, set - JAWA Californian, 634 Can be used for: JAWA 350 type 362 Californian JAWA 350 type 634
Our Price 8.63 EUR
Induction coil 6V (interupter), long (MZA) - Simson Note: The induction coil (8351. 1/2) can be used only for 6V contact (interrupter) ignition - SLPZ. It is intended for an older modem motorcycles Simson. The induction coil is in long version. Product from the German company MZA, PLITZ quality. SLPZ - contact ignition (interupter) with stator plate no. 390071, (MZA no. 50750). Can be used:
Our Price 26.70 EUR
Induction coil 6V/12V (interupter), long (MZA) - Simson Note: The induction coil (8352.1/2) can be used for 6V or 12V contact (interrupter) ignition - SLPZ. The induction coil is in long version. Product from the German company MZA, PLITZ quality. SLPZ - contact ignition (interupter) with stator plate no. 390071, (MZA no. 50750). Can be used: Simson S50, S51, S70, SR50, SR80, Schwalbe KR51/1,
Our Price 21.43 EUR
Inner strut of rear fender, LONG - JAWA Pérák Can be used for: Jawa 250 type 10,11 Pérák, year 1946-7 Jawa 250 type 11 Pérák, year 1948-9 Jawa 250 type 11 Pérák, year 1950-4 Jawa 350 type 18 Pérák, ryearok 1948-55 Jawa Ogar 350 type 12, year 1948
Our Price 19.76 EUR
Inner strut of rear fender, SHORT - JAWA Pérák Can be used for: Jawa 250 type 10,11 Pérák, year 1946-7 Jawa 250 type 11 Pérák, year 1948-9 Jawa 250 type 11 Pérák, year 1950-4 Jawa 350 type 18 Pérák, ryearok 1948-55 Jawa Ogar 350 type 12, year 1948
Our Price 8.08 EUR
Inner tube 3.00 - 10" (KENDA), straight valve - Stella Can be used for: JAWA Stella (134)
Our Price 6.47 EUR
Inner tube 3.00 - 4" (KABAT), bent valve Note: Tube suitable for tire size 3.00 - 4" (bent valve) Can be used for: PAV 40 PAV 41
Our Price 6.28 EUR
Inner tube 3.00 / 3.25 - 16" Note: Tube suitable for tire size 3.00 / 3.25 - 16" Valve TR-4.
Our Price 5.39 EUR
Inner tube 3.00 / 3.25 - 19" Note: Tube suitable for tire size 3.00 / 3.25 - 19" (straight valve)
Our Price 6.29 EUR
Inner tube 3.50 - 16" Note: Tube suitable for tire size 3.50 - 16" Valve TR-4.
Our Price 6.83 EUR
Insert of brake shield for speedometer drive gear - Babetta Can be used for: Babetta
Our Price 1.47 EUR
Instrument cover with indicators, upper (JAWA) - JAWA 350 640 Can be used for: JAWA 350 type 640 The product of the JAWA Moto spol s r. o..
Our Price 10.42 EUR
Insulating pad of carbon holder - JAWA Pérák, Kývačka (1st type) Note: Made of 1 mm hardened cardboard
Our Price 1.08 EUR
Insulating pad of dynamo regulator - JAWA Pérák Note: Made of 0.5 mm hardened cardboard
Our Price 0.90 EUR
Insulating pad of dynamo terminal block - JAWA 250 Pérák Note: Made of 0.5 mm hardened cardboard
Our Price 0.90 EUR
Insulating pad of dynamo terminal block - JAWA 350 Pérák Note: Made of 0.5 mm hardened cardboard
Our Price 0.90 EUR
Intake connecting cuff (MZA) - Simson SR50, SR80 Note: length: 50 mm, inner diameter: 30 mm Can be used for: Simson SR50, SR80 Product from the German distributor MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 3.41 EUR
Intake connecting cuff (MZA) - Simson S50, S51, S53, S70, S83 Note: length: 55 mm, inner diameter: 30 mm Can be used for: Simson S50, S51, S53, S70, S83 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 1.98 EUR
Intake filter insert, WIX - JAWA 50 05,20-23 Can be used for: JAWA 50 type 05 JAWA 50 type 20 JAWA 50 type 21 JAWA 50 type 23 (Mustang)
Our Price 4.85 EUR
Intake filter Stadion S11, S22 for carburetor Pionýr This intake filter is ideal for use on Stadion S11 and Stadion S22 mopeds with a Pionýr 20, 21, 23 carburettor and the spigot we offer. Thanks to its ideal size and design, it does not interfere with the pedals, but at the same time allows sufficient air supply, which is reflected in increased performance and better throttle response.
Our Price 15.27 EUR
STOCK
Interrupter of winkers (2 pins) 12V 2x21W (MZA) - Simson, MZ Note: Interrupter of winkers (8582.19/50) 12V 2x21W. Can be used: Simson MZ ETZ The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 7.37 EUR
Isolation of contact / breaker hammer - JAWA Pérák, Kývačka (1st type) Note: Made of hardened cardboard
Our Price 1.08 EUR
Joker cards - Motorcycle veterans Note: Contains 54 playing cards.
Our Price 3.42 EUR
Key of ammeter, CHROME - JAWA, ČZ Can be used for: JAWA 250 type 10,11 Pérák, year 1946-7 JAWA 250 type 11 Pérák, year 1948-9 JAWA 250 type 11 Pérák, year 1950-4 JAWA 350 type 18 Pérák, year 1948-55 JAWA Ogar 350 type 12, year 1948 JAWA-ČZ 125 type 355 Kývačka since 1956 JAWA-ČZ 175 type 356 Kývačka since 1956 JAWA 250 type 353 Kývačka since 1954 JAWA 350 type 354 Kývačka since 1954 JAWA 250 type
Our Price 12.60 EUR
Key of clutch basket - ČZ 125 B,T Can be used for: ČZ 125 B ČZ 125 T
Our Price 4.13 EUR
Key of clutch basket - ČZ 125/150 C Can be used for: ČZ 125 C ČZ 150 C
Our Price 4.13 EUR
Key of switchbox, BLACK (MZA) - Simson Note: Key of switchbox Simson. Can be used: Simson The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 1.30 EUR
Key ring - ČEZETA 501 SCOOTER "PRASE" (profile) Note.: The keychain is made of 2 mm thick stainless steel. Polishing to a deep mirror shine gives a very attractive look that resembles a jewel. Great as a gift or souvenir. Packed in a small gift bag.
Our Price 10.63 EUR
Key ring - ČEZETA 502 SCOOTER "PRASE" (profile) Note.: The keychain is made of 2 mm thick stainless steel. Polishing to a deep mirror shine gives a very attractive look that resembles a jewel. Great as a gift or souvenir. Packed in a small gift bag.
Our Price 10.63 EUR
Key ring - JAWA 350 638 (BOSCH key) Note.: The keychain is made of 2 mm thick stainless steel. Polishing to a deep mirror shine gives a very attractive look that resembles a jewel. Great as a gift or souvenir. Packed in a small gift bag.
Our Price 14.95 EUR
Key ring - JAWA 250 PÉRÁK (profile) Note.: The keychain is made of 2 mm thick stainless steel. Polishing to a deep mirror shine gives a very attractive look that resembles a jewel. Great as a gift or souvenir. Packed in a small gift bag.
Our Price 10.63 EUR
Key ring - JAWA 350 634 KONOPNICE (profile) Note.: The keychain is made of 2 mm thick stainless steel. Polishing to a deep mirror shine gives a very attractive look that resembles a jewel. Great as a gift or souvenir. Packed in a small gift bag.
Our Price 10.63 EUR
Key ring - JAWA 350 638 (profile) Note.: The keychain is made of 2 mm thick stainless steel. Polishing to a deep mirror shine gives a very attractive look that resembles a jewel. Great as a gift or souvenir. Packed in a small gift bag.
Our Price 10.63 EUR
Key ring - JAWA 350 640 (profile) Note.: The keychain is made of 2 mm thick stainless steel. Polishing to a deep mirror shine gives a very attractive look that resembles a jewel. Great as a gift or souvenir. Packed in a small gift bag.
Our Price 10.63 EUR
Key ring - JAWA 50 PIONÝR (profile) Note.: The keychain is made of 2 mm thick stainless steel. Polishing to a deep mirror shine gives a very attractive look that resembles a jewel. Great as a gift or souvenir. Packed in a small gift bag.
Our Price 10.63 EUR
Key ring - Simson S51 Electronic (profile) Note: The SIMSON S51 ELECTRONIC key ring is made of stainless steel with a thickness of 2 mm. The final treatment is polishing to a mirror shine. Suitable as a gift or key decoration from your loved one.
Our Price 10.63 EUR
Key ring - Simson S51 Enduro (profile) Note: The SIMSON S51 ENDURO key ring is made of stainless steel with a thickness of 2 mm. The final treatment is polishing to a mirror shine. Suitable as a gift or key decoration from your loved one.
Our Price 10.63 EUR
Key ring - Simson SR50 (profile) Note: The SIMSON SR50 key ring is made of stainless steel with a thickness of 2 mm. The final treatment is polishing to a mirror shine. Suitable as a gift or key decoration from your loved one.
Our Price 10.63 EUR
Key ring - VELOREX (profile) Note.: The keychain is made of 2 mm thick stainless steel. Polishing to a deep mirror shine gives a very attractive look that resembles a jewel. Great as a gift or souvenir. Packed in a small gift bag.
Our Price 10.63 EUR
Kick starter wheel (MZA) - MZ 125/150 ETZ, TS, ES Can be used for: MZ 125 ETZ, 150 ETZ MZ 125 ES, 150 ES MZ 125 TS, 150 TS The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 15.27 EUR
Kick starter wheel - MZ 150 ETZ Can be used for: MZ MZ 125 ETZ MZ MZ 125 type TS MZ MZ 150 ETZ MZ MZ 150 type TS
Our Price 6.29 EUR
Kick starter wheel 28t. (MZA) - Simson S51, S53, S70, SR50, SR80 Can be used: Simson S51, S53, S70 ,SR50, SR80, Schwalbe KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 12.62 EUR
Kickstarter lever (MZA) - MZ 125/150 ETZ Can be used for: MZ 125 ETZ, 150 ETZ The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 14.19 EUR
Kickstarter lever (MZA) - MZ 250/251/301 ETZ 250 TS Can be used for: MZ ETZ250, ETZ251, ETZ301 MZ TS250 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 20.66 EUR
Kickstarter lever, fixed (MZA) - Simson S50, S51, S53, S70, KR51, SR4-2/3/4 Note: Precision processing, high quality chrome. Rubber is part of the lever. Can be used for: Simson S50, S51, S53, S70, Schwalbe, KR51, SR4-2/3/4 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 21.02 EUR
Kickstarter lever, folding (MZA) - Simson SR50, SR80 Note: Precision processing, high quality chrome. Rubber is part of the lever. Can be used for: Simson SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 14.81 EUR
Kickstarter lever, folding (QMP) - Simson S51, S53, S70 Enduro Note: Rubber is part of the lever. Can be used for: Simson S51, S53, S70
Our Price 9.89 EUR
Clutch carrier (MZA) - MZ 250/251/301 ETZ 250 TS Can be used for: MZ ETZ250, ETZ251, ETZ301 MZ ES175, ES250 MZ ETS250 MZ TS250 The product of the MZA, which is the exclusive holder of the SIMSON brand. GPSR Contact: MZA Meyer–Zweiradtechnik GmbH, Baunsbergstr. 60-62, 34131, Kassel, Germany, gpsr@mza.de
Our Price 3.23 EUR
Kickstarter spring (MZA) - Simson S50, KR51/1, SR4-1/2/3/4 Note: This is an original spare part. Can be used: Simson S50, KR51/1, SR4-1/2/3/4 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 5.79 EUR
