Introduction » Parts STADION / JAWETTA » Cylinder-Crank mechanism
Parts STADION / JAWETTA / Cylinder-Crank mechanism
Suction insert "tunning" (16mm) - Stadion S11 Note: Hole diameter 16mm
Our Price 5.79 EUR
Suction insert (12mm) - Stadion S11 Note: Hole diameter 12mm
Our Price 6.47 EUR
Thermal insulation between cylinder and carburetor (PROFI) - Stadion S22, S23 Note: It is a precise PROFI replica according to the unused original part for the last series S23, where the aluminum cylinder liner was not used (can also be used on S22 or S11) - thickness 6mm. Parameters: ensures smooth flow of the mixture one passage is therefore eliminated and therefore the seal you don't have to
Our Price 11.68 EUR
Thermal insulation between cylinder and carburetor - Stadion S22, S23 Parameters: ensures smooth flow of the mixture one passage is therefore eliminated and therefore the seal you don't have to look for an aluminum cylinder in the cylinder used material: THERMAL INSULATING PLASTIC Can be used for: Stadion type S22, S23
Our Price 1.80 EUR
Thread of spark plug M14, repair - JAWA,ČZ,SIMSON,MZ ČZ ČZ 125 A ČZ ČZ 125 B ČZ ČZ 125 T ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 125,150 C ČZ ČZ 175 rikša type 505 ČZ ČZ 175 skutr type 501 - two exhausts ČZ ČZ 175 skutr type 502 - one exhaust ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ 250 type 455 ČZ
Our Price 1.80 EUR
Tool for honing cylinders (32-90mm) for a drill Note: The honing device is used for honing (cleaning), i.e. finishing processing of very precise surfaces that require a multi-directional surface structure (e.g. cylinders of internal combustion engines) Note: Honing must be done at low speeds and the cylinder must be lubricated with oil. At the same time, it is necessary to be careful not to get a
Our Price 15.10 EUR
