Introduction » Parts JAWA 50 type 05,20-23 » Cylinder-Crank mechanism
Parts JAWA 50 type 05,20-23 / Cylinder-Crank mechanism
Sprocket wheel of crank with nut 11t - Pionýr
Our Price 14.01 EUR
Sprocket wheel of crank with nut 9t - Pionýr
Our Price 17.61 EUR
Stones for honing cylinders tool (32-90mm) for drill Note: 50 mm long stones intended for honing tools 32 - 90 mm. Set includes stones (3 pcs) and mounting pins.
Our Price 3.60 EUR
Stud 6- Pin Jawa 550-555,05,20-23,Stadion,Jawetta- cylinder/exhaust Simson cylinder/Carburettor
Our Price 0.69 EUR
Stud-Carburettor Jawa 550-555,20-23 cylinder/Carburettor Babetta 207,210 Stadion 11,22,23 ,Jawetta cylinder/Carburettor
Our Price 0.90 EUR
Thread of spark plug M14, repair - JAWA,ČZ,SIMSON,MZ ČZ ČZ 125 A ČZ ČZ 125 B ČZ ČZ 125 T ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 125,150 C ČZ ČZ 175 rikša type 505 ČZ ČZ 175 skutr type 501 - two exhausts ČZ ČZ 175 skutr type 502 - one exhaust ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ 250 type 455 ČZ
Our Price 1.80 EUR
Threaded stud of cylinder, corrective M6/M8 - Pionýr Lenght: 14 cm
Our Price 1.79 EUR
Tool for honing cylinders (32-90mm) for a drill Note: The honing device is used for honing (cleaning), i.e. finishing processing of very precise surfaces that require a multi-directional surface structure (e.g. cylinders of internal combustion engines) Note: Honing must be done at low speeds and the cylinder must be lubricated with oil. At the same time, it is necessary to be careful not to get a
Our Price 10.60 EUR
