Introduction » Parts SIMSON
Spare parts SIMSON
Type S50, S51 Enduro/Elektronik, S70
- Accessories
- Bowdens & Rods
- Carburettor
- Cylinder-Crank mechanism
- Wheels-Brakes
- Engine-Bearings-Seals
- Fuel tank
- Front fork-Steering
- Gears / Shifting
- Frame-Stand-Footrests
- Handlebars
- Seats
- Clutch
- Lighting
- Exhaust muffler with knee
- Rear shocks
- Suction
- Ignition-Electrical
Lid of box, lower (MZA) - Simson Can be used for: Simson S50, S51, S53, S70, S83, Sperber The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 3.96 EUR
Lid of wheel hub, PLASTIC - Simson Simson Simson S50 Simson Simson S51 type Electronic ( 50,60,70) Simson Simson S51 type Enduro ( 50,60,70) Simson Simson SR - scooter ( 50,60,70 )
Our Price 3.63 EUR
Light coil 12V 42W Bilux (MZA) - Simson Note: Mounting Screw Thread: M4 Distance between mounting bolts (between bolt centers): 40 mm Coil height (winding): 30 mm For 12V installation: headlight bulb 12V 35/35W, bulb of rear lamp 12V 5W Coil marking by manufacturer: 203 Can be used: Simson S51, S53, S70, S83, SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 12.06 EUR
Light coil 12V 42W Halogen (MZA) - Simson Note: Light coil for Simson motorcycles. Product of German company MZA, producer PLITZ. Mounting Screw Thread: M4 Distance between mounting bolts (between bolt centers): 40 mm Coil height (winding): 33 mm For 12V installation: halogen headlight bulb 12V 35/35W H4 HS1, bulb of rear lamp 12V 5W Coil marking by manufacturer: 204 Can be used: Simson S51, S53,
Our Price 17.60 EUR
Light coil 6V 35W (MZA) - Simson Note: Light coil for Simson motorcycles. Product of German company MZA, producer PLITZ. Mounting Screw Thread: M4 Distance between mounting bolts (between bolt centers): 40 mm Coil height (winding): 30 mm For 6V installation: headlight bulb 6V 35/35W H4 HS1, bulb of rear lamp 6V 5W Coil marking by manufacturer: 24 Can be used: Simson S51, S70, SR50, SR80, Schwalbe
Our Price 17.79 EUR
Lock insert of side cover (MZA) - Simson S51, S50, S70 Can be used for: Simson S51, S50, S70 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 6.47 EUR
Lock insert of side cover (MZA) - Simson S53, S83 Can be used for: Simson S53, S83 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 12.96 EUR
Locknut of clutch basket bolt (MZA) - Simson Can be used for: Simson
Our Price 1.08 EUR
Locknut of primary wheel pinion (MZA) - Simson Can be used for: Simson
Our Price 1.26 EUR
Luggage carrier, BLACK - Simson Can be used for: Simson Simson S50 Simson Simson S51 type Electronic ( 50,60,70) Simson Simson S51 type Enduro ( 50,60,70)
Our Price 19.59 EUR
Luggage carrier, CHROME (MZA) - Simson S50, S51, S70 Note.: The luggage carrier has a short support bracket. Can be used for: Simson S50, S51, S70 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 29.29 EUR
Luggage carrier, CHROME - Simson Can be used for: Simson Simson S50 Simson Simson S51 type Electronic ( 50,60,70) Simson Simson S51 type Enduro ( 50,60,70)
Our Price 26.23 EUR
Luggage carrier, complete (MZA) - Simson Schwalbe KR51, SR4- Note.: The luggage carrier is chromed. Luggage rack is supplied with a strap, buckle and hook. Can be used for: Simson Schwalbe KR51, SR4- The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 28.68 EUR
Luggage carriers, side L+R (MZA) - Simson S50, S51, S70 Note: The side carriers are complete. Carriers are for right and left side. The struts are chrome and black. Screws for fixing are included in the package. The carriers are not intended for the original suitcase. Can be used for: Simson S50, S51, S70 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 66.48 EUR
Luggage case 30L BLACK REFLECTION Capacity : 1 integral + accessory Dimensions : W- 400/ D-410 / H-300 cm Load capacity: 3 kg
Our Price 41.46 EUR
Luggage case 30L RED REFLECTION Capacity : 1 integral + accessory Dimensions : W- 400/ D-410 / H-300 cm Load capacity: 3 kg
Our Price 41.46 EUR
Magnetic bowl 150mm The product makes it possible to store various types of metal elements during repairs. The magnet allows you to stick the bowl in a suitable place and protects the bowl and the components stored in it from falling and spilling. The magnet of the bowl is secured with rubber, which protects the paint from scratches. The bowl is made of double stamped sheet metal, chromed and
Our Price 4.32 EUR
Main nozzle 60 - Simson Simson Schwalbe Simson Simson S50 Simson Simson S51 type Electronic ( 50,60,70) Simson Simson S51 type Enduro ( 50,60,70) Simson Simson SR - scooter ( 50,60,70 ) Simson Star
Our Price 1.36 EUR
Main nozzle 67 - Simson Simson Schwalbe Simson Simson S50 Simson Simson S51 type Electronic ( 50,60,70) Simson Simson S51 type Enduro ( 50,60,70) Simson Simson SR - scooter ( 50,60,70 ) Simson Star
Our Price 1.30 EUR
Main nozzle 78 - Simson Simson Schwalbe Simson Simson S50 Simson Simson S51 type Electronic ( 50,60,70) Simson Simson S51 type Enduro ( 50,60,70) Simson Simson SR - scooter ( 50,60,70 ) Simson Star
Our Price 1.30 EUR
Microfiber cloth (40x40 cm), BLUE Very soft microfiber cloth. Suitable for cleaning and polishing the exterior and interior.
Our Price 4.50 EUR
Mirror, round (M10) "type 1" - UNI Note.: Mirror diameter: 115 mm
Our Price 3.46 EUR
STOCK
Mirror, round (M10) "type 2" - UNI Note.: Mirror diameter: 120 mm
Our Price 6.10 EUR
STOCK
Mirrors, set L+R (MZA) - Simson Note.: The set includes 2 mirrors (left and right) for Simson motorcycles. The diameter of the mirror glass is 120 mm. Mirrors have thread M8. Can be used for: Simson S50, S51, S53, S70, S83, SR50, SR80 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 12.94 EUR
MOTIP - Alu zinc spray MoTip Alu Zinc Spray for zinc-plated parts and surfaces, which have been damaged by welding, sanding, drilling, transportation etc., and which have to repaired or adapted to colour shade.Also suitable as excellent corrosion protection for metal surfaces and blanc iron metals. Suitable for only a limited extend on aluminium QUALITY AND PROPERTIES Excellent corrosion
Our Price 9.35 EUR
MOTIP - Carburettor cleaner Cleaner for the interior and the exterior of carburettors and valves, without disassembly. Carburettor cleaner has high dissolving properties and leaves no residue. MoTip Carburettor Cleaner is non corrosive and has a directed jetspray. QUALITY AND PROPERTIES Directed jetspray High dissolving properties Leaves no residue Non-corrosive 360° valve PHYSICAL AND CHEMICAL
Our Price 7.09 EUR
MOTIP - Chrome effect spray High-gloss effect spray that gives flat surfaces a shiny effect. It is suitable for use on metal, wood, glass and various plastics. Limited weather and smear resistance. QUALITY AND PROPERTIES High-quality acrylic Good coverage Brilliant shine Excellent adhesion Fast drying time Good flow, flat surface Not weather or smear resistant! PHYSICAL AND CHEMICAL DATA
Our Price 11.86 EUR
MOTIP - Copper grease Spray with a high copper content to prevent wear and sticking of screwed connections which are exposed to very high temperatures. Copper spray has high thermal stability and is corrosion preventive. Copper spray is resistant to chemicals and weather influences and prevents wear and sticking. MoTip Copper Spray is resistant to temperatures of - 40°C up to + 1.100°C. For use:
Our Price 8.27 EUR
MOTIP - Engine paint, BLACK MOTIP - Engine paint can be used to coat engine blocks and other parts that have been exposed to strong vibrations and heat stress (up 110°C). The lacquer coating retains the required level of elasticity. QUALITY AND PROPERTIES Good filling power Long-lasting high gloss Elastic, resistant to change in temperature Scratch and shockproof Good protection against
Our Price 12.96 EUR
MOTIP - Engine paint, SILVER MOTIP - Engine paint can be used to coat engine blocks and other parts that have been exposed to strong vibrations and heat stress (up 110°C). The lacquer coating retains the required level of elasticity. QUALITY AND PROPERTIES Good filling power Long-lasting high gloss Elastic, resistant to change in temperature Scratch and shockproof Good protection against
Our Price 12.96 EUR
MOTIP - Foam cleaner Spray to protect textile and leather from moisture and the adhesion of dirt. As a result of the unique formula, an invisible, protecting film is formed, which is water-repellent, however, breathing and effectively prevents renewed adhesion of dirt. MoTip Impregnation Spray gives lasting protection and is user-friendly. QUALITY AND PROPERTIES Water-repellent Breathing Invisible
Our Price 9.17 EUR
MOTIP - Gasket remover Spray for the fast and easy removal of dried adhesives and seals, as well as hardened sealing material from car and machine parts. Gasket remover has high dissolving properties and is non-conductive and non-corrosive. In view of the high viscosity, gasket remover has optimum effect. MoTip Gasket Remover is user-friendly and has a directed jetspray. For use on: Metal, wood,
Our Price 6.65 EUR
MOTIP - Oil stain remover Highly effective foam cleaner which can help to easily remove stains and dirt from nearly all surfaces without leaving a residue. For use on: Car: seats, floor mats, door and roof trims, discs, rims Home: furniture, garden furniture, blinds QUALITY AND PROPERTIES Highly solvent Very effective Pleasant smell Water-based Sprayable from any angle due to a special 360° valve.
Our Price 8.27 EUR
MOTIP - Refractory paint for cylinders and exhausts, BLACK (HEAT RESISTANT) MOTIP HEAT RESISTANT Spray can be used to repair surfaces that have been exposed to very high temperatures. Suitable for use on exhaust pipes, ovens, grill etc. They can be sprayed on bare metal. No primer necessary! QUALITY AND PROPERTIES High temperature resistance to 800°C Good coverage and filling power Excellent
Our Price 11.86 EUR
MOTIP - Refractory paint for cylinders and exhausts, SILVER (HEAT RESISTANT) MOTIP HEAT RESISTANT Spray can be used to repair surfaces that have been exposed to very high temperatures. Suitable for use on exhaust pipes, ovens, grill etc. They can be sprayed on bare metal. No primer necessary! QUALITY AND PROPERTIES High temperature resistance to 800°C Good coverage and filling power Excellent
Our Price 11.17 EUR
MOTIP - Releaser of rusted parts (SHOCK OIL) Effective tool to loosen rusted parts. As a result of the fierce decrease in temperature to –30°C and the lubricating properties of shock oil, the screwed connection can be loosed. MoTip Shock Oil has excellent lubricating properties and a directed jetspray. QUALITY AND PROPERTIES Very effective Directed jetspray Briefly decreases the temperatur to
Our Price 5.41 EUR
MOTIP - Zinc repair MoTip Zinc Coating is excellent for mending and color harmonization small damage on hot-dip galvanized steel substrates. Especially suitable for protecting welds and for severe corrosive metals. Zinc coating with approximately 90% zinc dust content in the dry film.Fields of application:Doors, fittings, fences, gutters, drainpipes, guardrails, containers INSTRUCTION MANUEL
Our Price 8.27 EUR
MOTO Repair string, black + Vulcanizing fluid FERDUS MOTO Repair string 100/10-3,5 MOTO, black Repair strings are intended for quick repairs of tyre punctures. A puncture is defined as a hole in the tyre tread up to 6 mm dia. caused mostly by driving over a nail or other sharp and thin object.VELO-MOTO-AUTO Thin repair stringsDiameter: 3.5 mmLength: 100 mm Vulcanizing fluid D 100 ml - For cold
Our Price 1.65 EUR
Neckerchief (multifunctional scarf), BLUE (MZA) - Simson Note: Multifunctional neck scarf (blue) with SIMSON logo print. Material: 100% polyester (microfiber), quick-fastening, stretchable Washable at 40 ° C The size of the tunnel after sewing is approx. 24.5 x 49 cm Unisex The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 9.08 EUR
Needle Bearing hold the strap piece of connecting rod Značka type Simson Simson S 51 type Electronic ( 50,60,70) Simson Simson S 51 type Enduro ( 50,60,70) Simson Simson SR - skutr ( 50,60,70 )
Our Price 0.18 EUR
Needle for carburetor BVF 16N3, complete - Simson Note: BVF 16N3 carburetor repair kit. This is an original spare part.
Our Price 5.21 EUR
Needle jet (215), for carburetor BVF 16N1 (TWN) - Simson Note: BVF 16N1 carburetor needle housing
Our Price 1.82 EUR
Needle of carburetor AMAL (A) - Simson Note: Needle types for AMAL carburetor A = S1 for very lean mixtureA0 = E1 for normal mixtureA1 = E for a leaner mixtureA2 = E2 for rich mixture
Our Price 3.46 EUR
Needle of carburetor AMAL (A0) - Simson Note: Needle types for AMAL carburetor A = S1 for very lean mixtureA0 = E1 for normal mixtureA1 = E for a leaner mixtureA2 = E2 for rich mixture
Our Price 5.57 EUR
Needle of carburetor AMAL (A1) - Simson Note: Needle types for AMAL carburetor A = S1 for very lean mixtureA0 = E1 for normal mixtureA1 = E for a leaner mixtureA2 = E2 for rich mixture
Our Price 3.46 EUR
Needle of carburetor AMAL (A2) - Simson Note: Needle types for AMAL carburetor A = S1 for very lean mixtureA0 = E1 for normal mixtureA1 = E for a leaner mixtureA2 = E2 for rich mixture
Our Price 3.46 EUR
Needle of carburetor BING - Simson, Manet Korádo Note: Needle is designed for the BING carburetor. This is an original spare part. Can be used for: Simson Manet korádo Carburetors BING for motorcycles ... BING produces carburettors for motorcycles from 50 to more than 1000 ccm for over 70 years. Experienced engineers optimize the development of carburettors for fuel consumption and exhaust
Our Price 7.78 EUR
Needle of carburetor BVF 16N1-11 (MZA) - Simson Note: Needle for carburettors type BVF 16N1-11. This is an original spare part.
Our Price 2.34 EUR
Needle of carburetor BVF 16N1-8 /09/ (MZA) - Simson Note: Needle for carburettors type BVF 16N1-8. This is an original spare part.
Our Price 2.34 EUR
Needle valve (BVF) - Simson, MZ Can be used for: Simson S50, S51, S53, S70, S83, SR50, SR80, KR51/2 MZ ETZ 125, 150 MZ ES 175/2, 250/2 MZ TS 125, 150
Our Price 4.14 EUR
Nut M6, raised (MZA) - Simson Note: height 10 mm. Can be used for: Simson
Our Price 0.72 EUR
Nut of exhaust knee (union nut), ZINC (MZA) - Simson Can be used: Simson S50, S51, S53, S70, SR50, Schwalbe The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 6.11 EUR
Nut of front fork with teflon, UPPER (MZA) - Simson Note: Dimension M24x1,5. Teflon liner prevents loosening. Can be used for: Simson S50, S51, S53, S70, S83, SR50 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 8.12 EUR
Nut of front fork, UPPER (MZA) - Simson Note: Dimension M24x1,5. Can be used for: Simson S50, S51, S53, S70, S83, SR50 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 5.10 EUR
Nut of shift (MZA) - Simson Can be used for: Simson S51, S53, S70, S83, SR50, SR80, KR51/2 The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 3.79 EUR
O-ring 18x2 of oil plug - Simson NBR (Perbunan®, Europrene N®, Krynac®) - Nitrile rubber (oil resistant rubber, for standardized sealing technique) An O-ring is a rubber seal that is designed to prevent unwanted gas or liquid leakage or leakage. The sealing ability is not only dependent on the O-ring, but also on the installation space.
Our Price 0.18 EUR
Oil drain pan with spout, 8L Built-in raised rim handles provide ease of use Features unique oversized pouring spout which makes recycling easier
Our Price 4.32 EUR
Oil drain plug with magnet M14x1,5 (MZA) - Simson Can be used for: Simson The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 5.39 EUR
Oil plug, BLACK (MZA) - Simson Can be used for: Simson The product of the MZA, which is the exclusive holder of the SIMSON brand.
Our Price 1.26 EUR
