Introduction » Parts JAWA 350 OHC (2017) » Engine-Bearings-Seals
Parts JAWA 350 OHC (2017) / Engine-Bearings-Seals
3-arm bearing puller 100 mm, screw M14 Note: Bearing puller with double-sided rotating arms. M14 screw Arm length 100mm
Our Price 7.01 EUR
3-arm bearing puller 150 mm, screw M16 Note: Bearing puller with double-sided rotating arms. M16 screw Arm length 150mm
Our Price 9.53 EUR
Bearing puller tool for 12-38mm hole Note: Three-arm bearing puller for bore diameters 12-38mm. M14 screw. Overall dimensions: 200x125 mm Material: steel CrV6150
Our Price 16.17 EUR
Engine block seal (JAWA) - JAWA 350 OHC Note: This is an original part JAWA Moto spol s r. o. Can be used for: JAWA 350 OHC type 845 JAWA 350 OHC type 845 Special JAWA 350 OHC type 845 Scrambler
Our Price 4.86 EUR
Gasket of cylinder head (JAWA) - JAWA 350 OHC Note: This is an original part JAWA Moto spol s r. o. Can be used for: JAWA 350 OHC type 845 JAWA 350 OHC type 845 Special JAWA 350 OHC type 845 Scrambler
Our Price 12.44 EUR
Gasket under cylinder (JAWA) - JAWA 350 OHC Note: This is an original part JAWA Moto spol s r. o. Can be used for: JAWA 350 OHC type 845 JAWA 350 OHC type 845 Special JAWA 350 OHC type 845 Scrambler
Our Price 3.12 EUR
Gasket under cylinder head, STEEL (JAWA) - JAWA 350 OHC Note: This is an original part JAWA Moto spol s r. o. Can be used for: JAWA 350 OHC type 845 JAWA 350 OHC type 845 Special JAWA 350 OHC type 845 Scrambler
Our Price 11.92 EUR
Motorový olej - MOGUL MOTO 2T FD (1000 ml) Note: Complies with SAE 10W-40, API SM, JASO MA 2 Year-round motor oils of exceptional performance designed mainly for lubrication of modern high-performance petrol four-stroke engines of sports motorcycles and ATVs, where a common oil filling is used for lubrication of both the engine and the gearbox, including the wet clutch.
Our Price 9.08 EUR
Pattern steel stamp 6mm, numbers 0-9 (red set) Note: Professional punches for metal, for castings - a set of number punches.The red and blue die sets differ in the font of the numbers. The red set has wider numbers, the blue set, on the other hand, narrower, see photo. Set includes: numbers ( 0-9 )Size: 6 mmSquare: 9.6mmPunch length: 68mm Phosphated, hardened, nickel plated.Hardness: 59-63 HRC
Our Price 10.07 EUR
PAULIN - Gasket maker (85g) -30°C to +180°C Universal high-elastic putty based on acrylonitrile rubber, which dries quickly and vulcanizes to a solid mass similar to rubber. It serves as a seal or a seal replacement. It is especially suitable for sealing gears, gearboxes, differentials, wedge boxes, water pumps, etc. Paulin Sealant resists oils, diesel, lyes, acids and coolants at temperature
Our Price 2.70 EUR
ZOLLEX - Gasket maker (85g), BLACK (260℃) ZOLLEX Black gasket maker is suitable for gaskets used in high temperature applications up to 260°C. Safe for oxygen sensor equipped vehicles. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. DIRECTIONS: Remove old gaskets
Our Price 3.78 EUR
ZOLLEX - Gasket maker (85g), CLEAR (260℃) ZOLLEX Clear gasket maker is suitable for gaskets used in high temperature applications up to 260°C. Safe for oxygen sensor equipped vehicles. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. DIRECTIONS: Remove old gaskets
Our Price 3.78 EUR
ZOLLEX - Gasket maker (85g), GRAY (350℃) ZOLLEX Gray gasket maker is suitable for gaskets used in high temperature applications up to 350°C. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. DIRECTIONS: Remove old gaskets and clean all surfaces thoroughly. Remove cap,
Our Price 3.78 EUR
ZOLLEX - Gasket maker (85g), RED (350℃) ZOLLEX Red gasket maker is suitable for gaskets used in high temperature applications up to 350°C. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. DIRECTIONS: Remove old gaskets and clean all surfaces thoroughly. Remove cap,
Our Price 3.78 EUR
