Introduction » Parts TATRAN » Engine-Bearings-Seals
Parts TATRAN / Engine-Bearings-Seals
3-arm bearing puller 100 mm, screw M14 Note: Bearing puller with double-sided rotating arms. M14 screw Arm length 100mm
Our Price 7.01 EUR
3-arm bearing puller 150 mm, screw M16 Note: Bearing puller with double-sided rotating arms. M16 screw Arm length 150mm
Our Price 9.53 EUR
Bearing puller tool for 12-38mm hole Note: Three-arm bearing puller for bore diameters 12-38mm. M14 screw. Overall dimensions: 200x125 mm Material: steel CrV6150
Our Price 16.17 EUR
Engine oil - MOGUL 2T (100 ml) Mogul 2T is an engine oil intended exclusively for the lubrication of older types of two-stroke petrol engines lubricated with a mixture of oil and petrol. Mixing ratio according to the engine manufacturer's recommendations. 1:25 for 2,5 liters of gasoline 1:33 for 3,3 liters of gasoline 1:40 for 4,0 liters of gasoline 1:50 for 5,0 liters of gasoline Flammable liquid
Our Price 1.80 EUR
Engine oil - MOL Dynamic Sprint 2T Red (1000 ml) MOL Dynamic Sprint 2T Red is a high-performance engine oil with a pre-dilution component, compatible with a catalyst for two-stroke engines with gasoline-oil mixture lubrication and oil injection. This is a replacement for the MOGUL TSF. Especially suitable for all two-stroke engines of motorcycles, garden equipment, chainsaws and also for
Our Price 6.83 EUR
Engine oil - Slovnaft Madit M2T (1000 ml) Engine oil for older, two-stroke passenger vehicles and motorbikes. A traditional lubricant for older, two-stroke gasoline and mixture-lubricated passenger cars and motorbikes, keeping the engine parts clean and preventing electrical arc flash in ignition plugs. Mixing ratio according to the engine manufacturer's recommendations. Flammable liquid IV.
Our Price 6.46 EUR
MOTIP - Engine paint, BLACK MOTIP - Engine paint can be used to coat engine blocks and other parts that have been exposed to strong vibrations and heat stress (up 110°C). The lacquer coating retains the required level of elasticity. QUALITY AND PROPERTIES Good filling power Long-lasting high gloss Elastic, resistant to change in temperature Scratch and shockproof Good protection against
Our Price 12.96 EUR
MOTIP - Engine paint, SILVER MOTIP - Engine paint can be used to coat engine blocks and other parts that have been exposed to strong vibrations and heat stress (up 110°C). The lacquer coating retains the required level of elasticity. QUALITY AND PROPERTIES Good filling power Long-lasting high gloss Elastic, resistant to change in temperature Scratch and shockproof Good protection against
Our Price 12.96 EUR
MOTIP - Gasket remover Spray for the fast and easy removal of dried adhesives and seals, as well as hardened sealing material from car and machine parts. Gasket remover has high dissolving properties and is non-conductive and non-corrosive. In view of the high viscosity, gasket remover has optimum effect. MoTip Gasket Remover is user-friendly and has a directed jetspray. For use on: Metal, wood,
Our Price 6.65 EUR
MOTIP - Oil stain remover Highly effective foam cleaner which can help to easily remove stains and dirt from nearly all surfaces without leaving a residue. For use on: Car: seats, floor mats, door and roof trims, discs, rims Home: furniture, garden furniture, blinds QUALITY AND PROPERTIES Highly solvent Very effective Pleasant smell Water-based Sprayable from any angle due to a special 360° valve.
Our Price 8.27 EUR
Pattern steel stamp 6mm, numbers 0-9 (red set) Note: Professional punches for metal, for castings - a set of number punches.The red and blue die sets differ in the font of the numbers. The red set has wider numbers, the blue set, on the other hand, narrower, see photo. Set includes: numbers ( 0-9 )Size: 6 mmSquare: 9.6mmPunch length: 68mm Phosphated, hardened, nickel plated.Hardness: 59-63 HRC
Our Price 10.07 EUR
PAULIN - Gasket maker (85g) -30°C to +180°C Universal high-elastic putty based on acrylonitrile rubber, which dries quickly and vulcanizes to a solid mass similar to rubber. It serves as a seal or a seal replacement. It is especially suitable for sealing gears, gearboxes, differentials, wedge boxes, water pumps, etc. Paulin Sealant resists oils, diesel, lyes, acids and coolants at temperature
Our Price 2.70 EUR
ZOLLEX - Gasket maker (85g), BLACK (260℃) ZOLLEX Black gasket maker is suitable for gaskets used in high temperature applications up to 260°C. Safe for oxygen sensor equipped vehicles. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. DIRECTIONS: Remove old gaskets
Our Price 3.78 EUR
ZOLLEX - Gasket maker (85g), CLEAR (260℃) ZOLLEX Clear gasket maker is suitable for gaskets used in high temperature applications up to 260°C. Safe for oxygen sensor equipped vehicles. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. DIRECTIONS: Remove old gaskets
Our Price 3.78 EUR
ZOLLEX - Gasket maker (85g), GRAY (350℃) ZOLLEX Gray gasket maker is suitable for gaskets used in high temperature applications up to 350°C. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. DIRECTIONS: Remove old gaskets and clean all surfaces thoroughly. Remove cap,
Our Price 3.78 EUR
ZOLLEX - Gasket maker (85g), RED (350℃) ZOLLEX Red gasket maker is suitable for gaskets used in high temperature applications up to 350°C. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. DIRECTIONS: Remove old gaskets and clean all surfaces thoroughly. Remove cap,
Our Price 3.78 EUR
