We use cookies to give you the best customer experience possible. If you continue to use our web, we will assume that you agree to the use of such cookies.

 

Jawa parts shop in Zlin (CZ)

 




Introduction » Parts VELOREX » Engine-Bearings-Seals

Parts VELOREX / Engine-Bearings-Seals


EUR
EUR
3-arm bearing puller 100 mm, screw M14 Note: Bearing puller with double-sided rotating arms. M14 screw Arm length 100mm
Our Price 7.01 EUR

3-arm bearing puller 100 mm, screw M14
STOCK


3-arm bearing puller 150 mm, screw M16 Note: Bearing puller with double-sided rotating arms. M16 screw Arm length 150mm
Our Price 9.53 EUR

3-arm bearing puller 150 mm, screw M16
STOCK


Bearing 6205 (ZVL) ZVL Slovakia, a.s. is a Slovak producer of bearings with 50 years of tradition. With 50 years of experience in the branch, ZVL Slovakia is one of the major players in the production of bearings and components for a wide range of industrial applications. Trademark ZVL is registered in more than 90 countries worldwide and is continually being globally strengthened by expanding
Our Price 1.82 EUR

Bearing 6205 (ZVL)
STOCK


Bearing 6302 2RS (ZVL) ZVL Slovakia, a.s. is a Slovak producer of bearings with 50 years of tradition. With 50 years of experience in the branch, ZVL Slovakia is one of the major players in the production of bearings and components for a wide range of industrial applications. Trademark ZVL is registered in more than 90 countries worldwide and is continually being globally strengthened by expanding
Our Price 2.34 EUR

Bearing 6302 2RS (ZVL)
STOCK


Bearing puller tool for 12-38mm hole Note: Three-arm bearing puller for bore diameters 12-38mm. M14 screw. Overall dimensions: 200x125 mm Material: steel CrV6150
Our Price 16.17 EUR

Bearing puller tool for 12-38mm hole
STOCK


Engine block seal - JAWA 250 Kývačka (2nd type), Velorex Can be used for: JAWA 250 type 353 Kývačka since 1954 Velorex 250, 350
Our Price 1.47 EUR

Engine block seal - JAWA 250 Kývačka (2nd type), Velorex
STOCK


Engine block seal - JAWA 250 Pérák, Kývačka (1st type) Can be used for: Jawa 250 type 10,11 Pérák, year 1946-7 Jawa 250 type 11 Pérák, year 1948-9 Jawa 250 type 11 Pérák, year 1950-4 Jawa,ČZ 250 type 353 Kývačka type 1954 Velorex 250, 350
Our Price 1.47 EUR

Engine block seal - JAWA 250 Pérák, Kývačka (1st type)
STOCK


Engine oil - MOGUL 2T (100 ml) Mogul 2T is an engine oil intended exclusively for the lubrication of older types of two-stroke petrol engines lubricated with a mixture of oil and petrol. Mixing ratio according to the engine manufacturer's recommendations. 1:25 for 2,5 liters of gasoline 1:33 for 3,3 liters of gasoline 1:40 for 4,0 liters of gasoline 1:50 for 5,0 liters of gasoline Flammable liquid
Our Price 1.80 EUR

Engine oil - MOGUL 2T (100 ml)
STOCK


Engine oil - MOL Dynamic Sprint 2T Red (1000 ml) MOL Dynamic Sprint 2T Red is a high-performance engine oil with a pre-dilution component, compatible with a catalyst for two-stroke engines with gasoline-oil mixture lubrication and oil injection. This is a replacement for the MOGUL TSF. Especially suitable for all two-stroke engines of motorcycles, garden equipment, chainsaws and also for
Our Price 6.83 EUR

Engine oil - MOL Dynamic Sprint 2T Red (1000 ml)
STOCK


Engine oil - Slovnaft Madit M2T (1000 ml) Engine oil for older, two-stroke passenger vehicles and motorbikes. A traditional lubricant for older, two-stroke gasoline and mixture-lubricated passenger cars and motorbikes, keeping the engine parts clean and preventing electrical arc flash in ignition plugs. Mixing ratio according to the engine manufacturer's recommendations. Flammable liquid IV.
Our Price 6.46 EUR

Engine oil - Slovnaft Madit M2T (1000 ml)
STOCK


Fibre washer - 14x18x1,5
Our Price 0.09 EUR

Fibre washer - 14x18x1,5
STOCK


Gasket of chain wheel - JAWA 250/350 Can be used for:   JAWA 250 type 11 (Pérák) JAWA 250 type 353 (Kývačka) JAWA 250 type 559 (Panelka) JAWA 250 type 590 (Sport) JAWA 350 type 18 (Pérák) JAWA 350 type 354 (Kývačka) JAWA 350 type 360 (Panelka) JAWA 350 type 361 (Sport) JAWA 350 type 362 (Californian) Velorex Velorex type 435 Velorex Velorex 250 (Oskar) Velorex Velorex 350
Our Price 0.90 EUR

Gasket of chain wheel - JAWA 250/350
STOCK


Gasket of clutch cover - JAWA 250, Velorex   JAWA 250 type 11 (Pérák)     JAWA 250 type 353 (Kývačka)     JAWA 250 type 559 (Panelka)     JAWA 250 type 590 (Sport)     Velorex Velorex 175 - three wheels     Velorex Velorex 250 (Oskar) – three wheels    
Our Price 1.12 EUR

Gasket of clutch cover - JAWA 250, Velorex
STOCK


Gasket of clutch cover - JAWA 350, Velorex   JAWA 350 type 18 (Pérák)     JAWA 350 type 354 (Kývačka)     JAWA 350 type 360 (Panelka)     JAWA 350 type 361 (Sport)     JAWA 350 type 362 (Californian)     Velorex Velorex - four wheels type 435     Velorex Velorex 350 - tříkolový
Our Price 1.12 EUR

Gasket of clutch cover - JAWA 350, Velorex
STOCK


Gasket under cylinders - JAWA 350 Kývačka, Panelka, 634 ČZ ČZ 250 type 471 - two cylinders ČZ ČZ 350 type 472 - two cylinders JAWA 250 Bizon tyep 623 JAWA 350 Bizon type 633 JAWA 350 type 18 (Pérák) JAWA 350 type 354 (Kývačka) JAWA 350 type 360 (Panelka) JAWA 350 type 362 (Californian) JAWA 350 type 634 Velorex Velorex - four whlees type 435 Velorex Velorex 350 - three wheels
Our Price 0.35 EUR

Gasket under Cylinder-Kyvacka.,Panelka. 350
STOCK


Guide bush 8x11x28 - JAWA Can be used for:   ČZ ČZ 250 type 471  ČZ ČZ 350 type 472 JAWA 250 Bizon type 623 JAWA 250 type 11 (Pérák) JAWA 250 type 353 (Kývačka) JAWA 250 type 559 (Panelka) JAWA 250 type 590 (Sport) JAWA 350 Bizon type 633 JAWA 350 type 18 (Pérák) JAWA 350 type 354 (Kývačka) JAWA 350 type 360 (Panelka) JAWA 350 type 361 (Sport) JAWA 350 type 362 (Californian) JAWA 350 type 634 JAWA
Our Price 1.50 EUR

Guide bush 8x11x28 - JAWA
STOCK


Ignition cam screw - JAWA, ČZ
Our Price 3.77 EUR

Ignition cam screw - JAWA, ČZ
STOCK


MOTIP - Engine paint, BLACK MOTIP - Engine paint can be used to coat engine blocks and other parts that have been exposed to strong vibrations and heat stress (up 110°C). The lacquer coating retains the required level of elasticity. QUALITY AND PROPERTIES Good filling power Long-lasting high gloss Elastic, resistant to change in temperature Scratch and shockproof Good protection against
Our Price 12.96 EUR

MOTIP - Engine paint, BLACK
STOCK


MOTIP - Engine paint, SILVER MOTIP - Engine paint can be used to coat engine blocks and other parts that have been exposed to strong vibrations and heat stress (up 110°C). The lacquer coating retains the required level of elasticity. QUALITY AND PROPERTIES Good filling power Long-lasting high gloss Elastic, resistant to change in temperature Scratch and shockproof Good protection against
Our Price 12.96 EUR

MOTIP - Engine paint, SILVER
STOCK


MOTIP - Gasket remover Spray for the fast and easy removal of dried adhesives and seals, as well as hardened sealing material from car and machine parts. Gasket remover has high dissolving properties and is non-conductive and non-corrosive. In view of the high viscosity, gasket remover has optimum effect. MoTip Gasket Remover is user-friendly and has a directed jetspray. For use on: Metal, wood,
Our Price 6.65 EUR

MOTIP - Gasket remover
STOCK


MOTIP - Oil stain remover Highly effective foam cleaner which can help to easily remove stains and dirt from nearly all surfaces without leaving a residue. For use on: Car: seats, floor mats, door and roof trims, discs, rims Home: furniture, garden furniture, blinds QUALITY AND PROPERTIES Highly solvent Very effective Pleasant smell Water-based Sprayable from any angle due to a special 360° valve.
Our Price 8.27 EUR

MOTIP - Oil stain remover
STOCK


Pattern steel stamp 6mm, numbers 0-9 (red set) Note: Professional punches for metal, for castings - a set of number punches.The red and blue die sets differ in the font of the numbers. The red set has wider numbers, the blue set, on the other hand, narrower, see photo. Set includes: numbers ( 0-9 )Size: 6 mmSquare: 9.6mmPunch length: 68mm Phosphated, hardened, nickel plated.Hardness: 59-63 HRC
Common Price 11.70 EUR
Our Price 10.07 EUR

Pattern steel stamp 6mm, numbers 0-9 (red set)
STOCK


PAULIN - Gasket maker (85g) -30°C to +180°C Universal high-elastic putty based on acrylonitrile rubber, which dries quickly and vulcanizes to a solid mass similar to rubber. It serves as a seal or a seal replacement. It is especially suitable for sealing gears, gearboxes, differentials, wedge boxes, water pumps, etc. Paulin Sealant resists oils, diesel, lyes, acids and coolants at temperature
Our Price 2.70 EUR

PAULIN - Gasket maker (85g) -30°C to +180°C
STOCK


Seal of carburetor flange - JAWA, ČZ Can be used for:   ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 175 rikša type 505 ČZ ČZ 175 skutr type 501  ČZ ČZ 175 skutr type 502  ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ 250 type 455 ČZ ČZ 250 type 471 ČZ ČZ 250 type 475  ČZ ČZ 350 type 472  JAWA - ČZ Jawa - ČZ
Our Price 0.18 EUR

Seal of carburetor flange - JAWA, ČZ
STOCK


Seal of carburetor flange, thermal - JAWA, ČZ Can be used for:   ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 175 rikša type 505 ČZ ČZ 175 skutr type 501 ČZ ČZ 175 skutr type 502  ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ 250 type 455 ČZ ČZ 250 type 471  ČZ ČZ 250 type 475 - Sport ČZ ČZ 350 type 472  JAWA
Our Price 0.90 EUR

Seal of carburetor flange, thermal - JAWA, ČZ
STOCK


Sealing paper 300x500x0,5 mm
Our Price 3.03 EUR

Sealing paper 300x500x0,5 mm
STOCK


Sealing wristband of starting lever - JAWA, ČZ ČZ ČZ 125 type 453 ČZ ČZ 125 type 473 - Sport ČZ ČZ 125 type 476 ČZ ČZ 125 type 488 ČZ ČZ 175 rikša type 505 ČZ ČZ 175 skutr type 501 - two exhausts ČZ ČZ 175 skutr type 502 - one exhasut ČZ ČZ 175 type 450 ČZ ČZ 175 type 470 - Sport ČZ ČZ 175 type 477 ČZ ČZ 175 type 487 ČZ ČZ 250 type 455 ČZ ČZ 250 type 471 - two exhausts ČZ ČZ 250 type 475 - Sport
Our Price 0.27 EUR

Sealing wristband of starting lever - JAWA, ČZ
STOCK


Simmering 25x62x8 (MVQ), SILICONE NOTE.: (MVQ) SILICONE Operating temperature: – 60 to +210 °C Resistant to mineral oils and lubricants It is not resistant to water, acids, synthetic automotive brake fluids Can be used for:   ČZ ČZ 250 type 471 ČZ ČZ 350 type 472 JAWA 250 Bizon type 623 JAWA 250 type 11 (Pérák) JAWA 250 type 353 (Kývačka) JAWA 250 type 559 (Panelka) JAWA 250 type 590 (Sport) JAWA
Our Price 1.30 EUR

Simmering 25x62x8 (MVQ), SILICONE
STOCK


Simmering 25x62x8 - JAWA ČZ ČZ 250 type 471 - two cylinders ČZ ČZ 350 type 472 - two cylinders JAWA 250 Bizon type 623 JAWA 250 type 11 (Pérák) JAWA 250 type 353 (Kývačka) JAWA 250 type 559 (Panelka) JAWA 250 type 590 (Sport) JAWA 350 Bizon type 633 JAWA 350 type 18 (Pérák) JAWA 350 type 354 (Kývačka) JAWA 350 type 360 (Panelka) JAWA 350 type 361 (Sport) JAWA 350 type 362 (Californian) JAWA 350
Our Price 1.07 EUR

Simmering 25x62x8 - JAWA
STOCK


Speedometer drive (N-N) 2615mm - Velorex DIAMETERS: Drive ends: square  Bowden cable length: 2615 mm Cable end design: NUT - NUT Aluminum nuts Can be used for: Velorex
Our Price 10.28 EUR

Speedometer drive (N-N) 2615mm - Velorex
STOCK


Speedometer drive pinion 11t. (SK) - JAWA 250 Panelka, Kývačka (2nd type) Note: Tachometer drive pinion suitable for JAWA 250 Panelka and 250 Kývačka 2.Typ engines - with external outlet for the tachometer. Total length 220mm. Can be used for: Jawa 250 type 559 Panelka Jawa 250 type 592 Jawa 250 type 590 Sport Jawa,ČZ 250 type 353 Kývačka Jawa 250 type 553,579 Libeňák Velorex 250, 350
Our Price 17.06 EUR

Speedometer drive pinion 11t. (SK) - JAWA 250 Panelka, Kývačka (2nd type)
STOCK


Speedometer drive pinion 11t., outlet 8mm (SK) - JAWA 250 Pérák, Kývačka Note: Tachometer drive pinion suitable for JAWA 250 Pérák and 250 Kývačka. Total length 180mm. Can be used for: Jawa 250 type 10,11 Pérák, year 1946-7 Jawa 250 type 11 Pérák, year 1948-9 Jawa 250 type 11 Pérák, year 1950-4 Jawa 250 type 353 Kývačka since 1954 Jawa 250 type 553,579 Libeňák Velorex 250, 350
Our Price 23.53 EUR

Speedometer drive pinion 11t., outlet 8mm (SK) - JAWA 250 Pérák, Kývačka
STOCK


ZOLLEX - Gasket maker (85g), BLACK (260℃) ZOLLEX Black gasket maker is suitable for gaskets used in high temperature applications up to 260°C. Safe for oxygen sensor equipped vehicles. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. DIRECTIONS: Remove old gaskets
Our Price 3.78 EUR

ZOLLEX - Gasket maker (85g), BLACK (260℃)
STOCK


ZOLLEX - Gasket maker (85g), CLEAR (260℃) ZOLLEX Clear gasket maker is suitable for gaskets used in high temperature applications up to 260°C. Safe for oxygen sensor equipped vehicles. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. DIRECTIONS: Remove old gaskets
Our Price 3.78 EUR

ZOLLEX - Gasket maker (85g), CLEAR (260℃)
STOCK


ZOLLEX - Gasket maker (85g), GRAY (350℃) ZOLLEX Gray gasket maker is suitable for gaskets used in high temperature applications up to 350°C. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. DIRECTIONS: Remove old gaskets and clean all surfaces thoroughly. Remove cap,
Our Price 3.78 EUR

ZOLLEX - Gasket maker (85g), GRAY (350℃)
STOCK


ZOLLEX - Gasket maker (85g), RED (350℃) ZOLLEX Red gasket maker is suitable for gaskets used in high temperature applications up to 350°C. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. DIRECTIONS: Remove old gaskets and clean all surfaces thoroughly. Remove cap,
Our Price 3.78 EUR

ZOLLEX - Gasket maker (85g), RED (350℃)
STOCK

NjBlMW