Introduction » Parts STADION / JAWETTA » Carburettor » Cover of carburetor - Stadion S22, S23
Cover of carburetor - Stadion S22, S23
STOCK
Full specifications
Cover of carburetor - Stadion S22, S23
|
Stadion + Jawetta |
Stadion type S 22 |
|||
|
Stadion + Jawetta |
Stadion type S 23 |
|||
Material: ABS (akrylonitril-butadien-styren), extraordinary resistance to UV radiation and weather conditions, color and temperature-stable.
Polishing and paint spraying:
The cover can be gently grinded with fine sanding paper and chemically 1-2x flush in acetone (immerse max for 1sec into acetone and allow to dry completely overnight).
The cover can be sprayed to color with colored acrylic plastic system e.g.: Body PLASTO fix spray 340 + MOTIP Autolack Acryl, these adjustments is better to let experienced painters.
Repair: Breaking the cover in case of uneven handling can be stuck with conventional acetone (apply acetone with a brush on both glued surfaces and keep for 1-2 minutes. Then brush acetone over the joint again, let it dry for about 1 hour).
Lze lepit i lepidlem na ABS podle instrukcí výrobce.
Notice: Drilling of screw holes is not recommended!
Upon agreement, it is possible to order only one part of the cover.
