Introduction » Parts JAWA 50 type 05,20-23 » Wheels-Brakes » Chain tensioners L+R, 2mm/M8 STAINLES, TUNING (CZ) - JAWA 05,20-23
Chain tensioners L+R, 2mm/M8 STAINLES, TUNING (CZ) - JAWA 05,20-23
STOCK
Full specifications
Chain tensioners L+R, 2mm/M8 STAINLES, TUNING (CZ) - JAWA 05,20-23
Can be used for:
- JAWA 50 type 05
- JAWA 50 type 20
- JAWA 50 type 21
- JAWA 50 type 23 (Mustang)
Stronger chain splinters for Jawa 50, type 05, 20, 21 and 23 mustang.
Made of 2mm stainless steel, which prevents the tensioner from pulling out. The edges are deburred, the marks from the pressing mold are ground and then sanded with ballotine. Stainless steel adjusting screw/nut M8 (the original has M6).
Because the square nut M8 has larger dimensions than the original M6, the inside of the splinter is also wider. To prevent it from being crushed after tightening the axle, a 2mm stainless steel washer (part of the package) must be put inside. It is the length of the axle.
